15 allied components interna tional 714-665-1 140 www.a lli edcom pon en ts .com rohs 12/01/11 schematics dimensions:inch( mm) unless otherwise specified, all tolerances are 0.010(0.25) 1. 000 (2 5.40) 0.39 5(1 0. 03) 0.26 0( 6.60) max 0.0 20 (0.50) 0.30 0( 7.62) 0.11 8( 3.00) 0. 900 (2 2. 86 )typ 0.10 0( 2.54) allied da tec ode AHTA-2001I 1 1ct:1ct 1ct:1ct 1ct:1ct 1ct:1ct td1 2 3 4 5 6 7 8 9 10 20 19 18 17 16 15 14 13 12 11 rd1 rd2 td2 tx1 rx1 rx2 tx2 all specifications subject to change without notice. mechanical 10/100 base t dual port transformer AHTA-2001I cw/w: 50pf typ @ 100khz, 0.2v polarity: 1-20, 4-17, 6-15, 9-12 in-phase ll: 0.5h max @ 100khz, 0.2v dcr: 0.9 operating temp: -40oc to +85oc max electrical speci?cations @ 25c part number ocl(uh min) @ 100khz, 200mv turns ratio chip: cable (5%) insertion loss (db max) return loss (db min) with 8ma dc bias 0.3-100mhz 0.3-30mhz 40mhz AHTA-2001I 350 1ct:1ct(tx)/1ct:1ct(rx) -1.1 -18 -14.4 60-80mhz -12 50mhz -13.1 part number AHTA-2001I electrical speci?cations @ 25c cross talk (db min) hi-pot (vrms) -35 1500 0.3-30mhz -40 80-100mhz -30 common mode rejection (db min) 60-100mhz -33 0.3-30mhz -42 60mhz isolation ?
|
