.026 .67 .105 2.67 .183 4.66 .215 5.46 .500 12.70 1.287 32.69 when assembled .315 8.00 .472 11.99 to tip of cable inner conductor .150 3.81 .625 15.88 .327 8.31 recommended cable trim dimensions catalog p/n: 0345-e00-c7202n notes: unless otherwise specified 1. designed for use with belden 1855a, gepco vdm230 or equivalent cable. 2. material specifications: body, ferrule: brass per astm b16. outer contact & center contact: beryllium copper, astm b196. insulator: teflon per astm d171. 3. finish specifications: body: .000100 min nickel per ams-qq-n-290 over copper flash per astm b734 (rohs). outer contact & center contact: .000030 min gold per astm b488 over .000080 min nickel per ams-qq-n-290 (rohs). ferrule: .000050 min nickel per ams-qq-n-290 over .000050 min copper flash per astm b734 (rohs). 4. electrical specifications: impedance: 75 ohms frequency range: dc - 6.0 ghz return loss(mated pair): <-25 db up to 3.0ghz <-20 db up to 6.0 ghz 5. compliant to smpte 424m (3g-sdi) standard. 6. ferrule and contact shipped loose. 7. interface per cecc 22230. 8. cap-e03. 9. crimp ferrule (.178 hex) and contact (.042 hex) using kth-2025. p/n description qty 0345-e00-c7202n single pack 1 0345-e00-c7202nu bulk pack 400 a cy bb 03/09/12 by date appd revised per ecr-er040786 description g rev 10/1/08 m. ayub date approved 10/1/08 b. larsen date approved 10/1/08 dcam date approved 09/29/08 rf date drawn customer sales drawing per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: decimal: .xx [x.x] .01 [0.3] .xxx [x.xx] .005 [0.13] .xxxx [x.xxx] .xxxx angles: 2 scale: x:x sht rev of g 1 1 SD0345-E00-C7202N winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 third angle dmf026 b din 1.0/2.3 75 ohm plug (crimp/crimp) for belden 1855a, gepco vdm230 cable or equivalent (rohs compliant)
|
