mixers - i/q mixers, irms & receivers - smt 10 10 - 1 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com discontinued product not recommended for new designs hmc569lc5 gaas mmic i/q downconverter 12 - 16 ghz v06.1208 general description features typical applications the hmc569lc5 is a compact gaas mcm i/q downconverter in a leadless rohs compliant smt package. this device provides a small signal conversion gain of 14 db with a noise fi gure of 2.5 db and 32 db of image rejection. the hmc569lc5 utilizes an lna followed by an image reject mixer which is driven by an lo buffer amplifi er. the image reject mixer eliminates the need for a fi lter following the lna, and removes thermal noise at the image frequency. i and q mixer outputs are provided and an external 90 hybrid is needed to select the required sideband. the hmc569lc5 is a much smaller alternative to hybrid style image reject mixer downconverter assemblies, and it eliminates the need for wire bonding by allowing the use of surface mount manufacturing techniques. electrical specifi cations, t a = +25 c, if = 100 mhz, lo = 0 dbm, vd3 = 5v, vd1, vd2 = 3v* parameter min. typ. max. units frequency range, rf 12 - 16 ghz frequency range, lo 8.5 - 19.5 ghz frequency range, if dc - 3.5 ghz conversion gain (as irm) 10 14 db noise figure 2.5 db image rejection 15 32 db 1 db compression (input) -7 dbm lo to rf isolation 30 45 db lo to if isolation 20 32 db ip3 (input) -0.5 dbm amplitude balance 0db phase balance 10 deg total supply current 160 208 ma *data taken as irm with external if hybrid functional diagram the hmc569lc5 is ideal for: ? point-to-point and point-to-multi-point radio ? military radar, ew & elint ? satellite communications conversion gain: 14 db image rejection: 32 db lo to rf isolation: 45 db noise figure: 2.5 db input ip3: -0.5 dbm 32 lead 5x5mm smt package: 25mm2
mixers - i/q mixers, irms & receivers - smt 10 10 - 2 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com discontinued product not recommended for new designs conversion gain vs. temperature input p1db vs. temperature conversion gain vs. lo drive image rejection vs. temperature return loss input ip3 vs. lo drive data taken as irm with external if hybrid -10 -5 0 5 10 15 20 11 12 13 14 15 16 17 +25c +85c -40c conversion gain (db) rf frequency (ghz) hmc569lc5 v06.1208 gaas mmic i/q downconverter 12 - 16 ghz -10 -5 0 5 10 15 20 11 12 13 14 15 16 17 -4dbm -2dbm 0dbm 2dbm 4dbm conversion gain (db) rf frequency (ghz) -25 -20 -15 -10 -5 0 8 101214161820 lo rf return loss (db) frequency (ghz) 10 20 30 40 50 60 11 12 13 14 15 16 17 +25c +85c -40c image rejection (db) rf frequency (ghz) -6 -4 -2 0 2 4 11 12 13 14 15 16 17 lo = -2 dbm lo = 0 dbm lo = +2 dbm lo = +4 dbm ip3 (dbm) rf frequency (ghz) -12 -10 -8 -6 -4 -2 0 11 12 13 14 15 16 17 +25c +85c -40c p1db (dbm) rf frequency (ghz)
mixers - i/q mixers, irms & receivers - smt 10 10 - 3 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com discontinued product not recommended for new designs isolations if bandwidth* amplitude balance vs. lo drive phase balance vs. lo drive quadrature channel data taken without if hybrid * conversion gain data taken with external if hybrid, lo frequency fi xed at 12 ghz and rf varied noise figure vs. lo drive, lo frequency = 12 ghz noise figure vs. lo drive, if frequency = 100 mhz v06.1208 hmc569lc5 gaas mmic i/q downconverter 12 - 16 ghz -60 -50 -40 -30 -20 -10 0 10 11 12 13 14 15 16 17 isolation (db) rf frequency (ghz) lo/if2 lo/if1 rf/if1 rf/if2 lo/rf -5 -3 -1 1 3 5 11 12 13 14 15 16 17 lo = -4 dbm lo = -2 dbm lo = +0 dbm lo = +2 dbm lo = +4 dbm amplitude balance (db) rf frequency (ghz) -20 -10 0 10 20 11 12 13 14 15 16 17 lo = -4 dbm lo = -2 dbm lo = 0 dbm lo = +2 dbm lo = +4 dbm phase balance (degrees) rf frequency (ghz) -40 -20 0 20 40 0.5 1 1.5 2 2.5 3 3.5 return loss conversion gain response (db) if frequency (ghz) 0 2 4 6 8 0.5 1 1.5 2 2.5 3 3.5 -4dbm -2dbm +0dbm +2dbm +4dbm noise figure (db) if frequency (ghz) 0 1 2 3 4 5 6 11 12 13 14 15 16 17 -2dbm +0dbm +2dbm +4dbm noise figure (db) rf frequency (ghz)
mixers - i/q mixers, irms & receivers - smt 10 10 - 4 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com discontinued product not recommended for new designs mxn spurious outputs nlo mrf01234 0xx14274154 114xx132740 22714xx1327 3412714xx13 454412714xx rf = 13.6 ghz @ -20 dbm lo = 13.5 ghz @ 0 dbm data taken without if hybrid all values in dbc below if power level. absolute maximum ratings rf +5 dbm lo drive +20 dbm vd1, vd2 4.0v vd3 5.5v channel temperature 150c continuous pdiss (t=85c) (derate 9.56 mw/c above 85c) 0.65 w thermal resistance (r th ) (channel to package bottom) 71 c/w storage temperature -65 to +150 c operating temperature -55 to +85 c esd sensitivity (hbm) class 1a outline drawing notes: 1. package body material: alumina 2. lead and ground paddle plating: 30 - 80 microinches gold over 50 microinches minimum nickle 3. dimensions are in inches [millimeters] 4. lead spacing tolerance is non-cumulative 5. package warp shall not exceed 0.05mm datum 6. all ground leads and ground paddle must be soldered to pcb rf ground electrostatic sensitive device observe handling precautions v06.1208 hmc569lc5 gaas mmic i/q downconverter 12 - 16 ghz
mixers - i/q mixers, irms & receivers - smt 10 10 - 5 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com discontinued product not recommended for new designs pin number function description interface schematic 1, 5, 7 - 9, 13 - 16, 22 - 27, 30 - 32 n/c no connection required. these pins may be connected to rf/dc ground without affecting performance. 2, 4, 10, 12, 17, 19, 21 gnd these pins and ground paddle must be connected to rf/dc ground. 3rf this pin is ac coupled and matched to 50 ohms. 6vd3 power supply for lo amplifi er. 100 ma typical, 120 ma maximum. 28, 29 vd1, vd2 power supply for rf lna. 60 ma typical, 88 ma maximum. 18 if2 this pin is dc coupled for applications not requir- ing operation to dc. this port should be dc blocked externally using a series capacitor whose value has been chosen to pass the necessary frequency range. for operation to dc, this pin must not sink / source more than 3 ma of current or part non-function and possible failure will result. 20 if1 11 lo this pin is ac coupled and matched to 50 ohms. pin descriptions typical application v06.1208 hmc569lc5 gaas mmic i/q downconverter 12 - 16 ghz note: lsb and usb is determined by gnd on hybrid
mixers - i/q mixers, irms & receivers - smt 10 10 - 6 for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com discontinued product not recommended for new designs evaluation pcb the circuit board used in the fi nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. v06.1208 hmc569lc5 gaas mmic i/q downconverter 12 - 16 ghz list of materials for evaluation pcb 111227 [1] item description c1, c2, c3 capacitor 0402, pkg. 100pf c4, c5, c6 capacitor 0402, pkg. 1000pf c7, c8,c9 capacitor, case a, 2.2uf *(polarity) j1, j2 pcb mount sma rf connector, sri j3, j4 pcb mount sma connector, johnson j5, j6 dc pin j7 dc pin r1, r2 resistor, 0402 pkg. 0 ohm u1 hmc569lc5 vc1 n/c pcb [2] 111225 evaluation board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350
|
