1999 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron semiconductor technical data data sheet 620, rev. b hermetic power schottky rectifier 200 c maximum operation temperature description: 100 volt, 30 amp, power schottky rectifiers in a hermet ic shd - 2 / 2b package. maximum ratings all ratings are @ t c = 25 c unless otherwise specified. rating symbol max. units peak inverse voltage piv 100 volts maximum dc output current (with cathode maintained @ t c =100 o c) i o 30 amps maximum nonrepetitive forward surge current (t=10ms, sine) i fsm 570 amps maximum junction capacitance (v r =5v) c t 1000 pf maximum thermal resistance (junction to mounting surface, c athode) r jc 0.9 c/w maximum operating and storage temperature range top/tstg - 65 to +200 c electrical characteristics characteristic symbol max. units maximum forward voltage drop, pulsed (per leg, i f = 30 amps) t j = 25 c t j = 125 c v f 0.84 0.68 volts maximum reverse current (per leg, i r @ 100 v piv) t j = 25 c t j = 125 c i r 0.75 15 ma SHD115444 SHD115444b
1999 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron data sheet 620, rev. b mechanical dimensions: in inches / mm shd11544 4 SHD115444b shd - 2 shd - 2b .075 (1.91) max .315.010 (8.00.254) moly lid moly base .315.010 (8.00.254) alumina ring .090 (2.29) max alumina ring moly base (cathode) .060.010 (1.52.254) .015.002 (.381.051) .020.005 r (.508.127 ) .315.010 (8.00.254) .150.010 (3.81.254) .465.020 (11.8.508) .315.010 (8.00.254) .015.005 (.381.127) copper anode 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 forward voltage drop - v f (v) 10 -2 10 -1 10 0 10 1 10 2 instantaneous forward current - i f (a) typical forward characteristics 125 c 200 c 175 c 25 c 0 20 40 60 80 100 120 reverse voltage - v r (v) 10 -4 10 -3 10 -2 10 -1 10 0 10 1 instantaneous reverse current - i r (ma) typical reverse characteristics 25 c 50 c 75 c 100 c 125 c 150 c 200 c 175 c 0 20 40 60 80 100 120 reverse voltage - v r (v) 100 200 300 400 500 600 700 800 900 junction capacitance - c t (pf) typical junction capacitance
1999 sensitron semiconductor 221 west industry court deer park, ny 11729 - 4681 phone (631) 586 - 7600 fax (631) 242 - 9798 www.sensitron.com sales@sensitron.com sensitron data sheet 620, rev. b SHD115444 SHD115444b disclaimer: 1 - the information given herein, includi ng the specifications and dimensions, is subject to change without prior no t ice to improve product characteristics. before ordering, purchasers are advised to contact the sensitron semiconductor sales department for the latest version of the datasheet (s) . 2 - in cases where extremely high reliability is required (su ch as use in nuclear power cont rol, aerospace and aviation, traffic equipment , medical e quipment , and safety equipment ) , safety should be ensured by using semiconductor devices that feature assu red safety or by means of users fail - safe precautions or other arrangement . 3 - in no event shall sensitron semiconductor be liable for any damages that may result from an accident or any other cause durin g operation of the users units according to the d atasheet(s) . sensitron semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4 - in no event shall sensitron se miconductor be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5 - no lice nse is granted by the datasheet (s) under any patents or other rights of any third party or sensitron semiconductor. 6 - the datasheet (s) may not be reproduced or duplicated, i n any form, in whole or part , without the expressed written permission of sensitron semiconductor. 7 - the products ( technolog ies) described in the datasheet (s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any th ird party. when exporting these products (technologies) , the necessary procedures are to be taken in accordance with related laws and regulations.
|