connectors (inlets/outlets) 4797 www.schurter.com/pg0 7 connectors iec appliance outlet j, snap-in/screw-on mounting, front side, solder or quick-connect terminal screw-on version j 70 c description - panel mount: snap-in or screw-on mounting, from front side - 1 function: connector, pin temperature 70 c protection class i - solder terminals or quick connect terminals substitute for type 072 3 approvals - ul license number: e103791 characteristics - qualified for use in equipment according iec/en 60950 other versions on request - other panel thickness - for protection class ii - types for enhanced glow wire test requirements acc. iec 60695-2- 11 to -13 for the use in unattended household equipment acc. iec 60335-1 references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 16 a / 250 vac; 50 hz ratings ul/csa 20 a / 250 vac; 60 hz dielectric strength > 2.5 kvac between l-n > 3 kvac between l/n-pe (1 min/50 hz) allowable operation temp. -25 c to 70 c protection class suitable for appliances with protection class 1 or 2 acc. to iec 61140 terminal solder terminals or quick connect ter - minals panel thickness s screw: max 8 mm mounting screw torque max 0.5 nm snap-in: 0.8 mm to 3 mm material: housing thermoplastic, black, ul 94v-0 appliance outlet j acc. to iec/en 60320-2-2 ul 498, csa c22.2 no. 42 (for cold conditions) pin-temperature 70 c, 16 a, protection class 1 dimensions snap-in mounting from front side
connectors (inlets/outlets) 4797 www.schurter.com/pg0 7 connectors screw-on mounting from front side variants panel mounting panel thickness s [mm] terminal protection class order number screw - quick connect terminals 6.3 x 0.8 mm 1 4797.0000 screw - solder terminals 1 4797.3000 snap-in 1.5 quick connect terminals 6.3 x 0.8 mm 1 4797.0015 snap-in 2 quick connect terminals 6.3 x 0.8 mm 1 4797.0020 snap-in 2.5 quick connect terminals 6.3 x 0.8 mm 1 4797.0025 snap-in 2 solder terminals 1 4797.3020 snap-in 2.5 solder terminals 1 4797.3025 articles for enhanced glow wire test requirements acc. iec 60695-2-11 to -13 can be ordered with ending ".15" (xxxx. xxxx.15). they are suitable for the use in unattended household equipment acc. iec 60335-1. packaging unit 50 pcs accessorie s description assorted cover s rear cover 0859.0075 cord retaining kit s cord retaining strain relief countersunk, j 4700.0009 flat head, l 4700.0011
connectors (inlets/outlets) 4797 www.schurter.com/pg0 7 connectors mating inlets/plug s category / description plug overview complet e iec plug i, cord connector (rewireable), straight 010 6 iec plug i, cord connector (rewireable), angled 161 1 iec plug i, cord connector (rewireable), straight 161 2 iec plug i, cord connector (rewireable), angled 478 9 iec plug i, cord connector (rewireable), straight 479 6 plug further types to 479 7 the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|