6.00 0.5 sq fit to tlh4405 leds 2.54 1mm bevel to indicate polarity 5 pitches 5.08 nat 29.48 11.80 14.90 4.50 top of leds 3.5 long lead(anode) this side view from top f a SSA360/6 SSA360/10 3mm led linear array ssa 360 is a precis ion moulded plastic mounting block for t1 size light emitting diodes. leds are on a 5.05mm pitch. material is black ny lon 6 to flammability specification ul-94vo. features ? six & ten channel block,end stackable for longer arrays. ? +/- 30 deg viewing angle. ? will accept t1 infra red emitters or sensors. ? small pcb footprint. ? leads on 0.1 inch pitch double row. ? less than ten positions available to special order . mechanical data bedford opto technology ltd, 1,biggar business park ,b iggar,lanarkshire ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk 4.5.06 view from top 1mm bevel to indicate polarity 14.90 11.80 6.00 top of leds 49.80 9 pitches 5.08 nat 2.54 long lead (anode) this side 3.5 a j SSA360/6 SSA360/10 pb these components are rohs compliant
absolute maximum rating per led electrical characteristics (tamb=25c) bedford opto technology ltd 1,biggar business park, biggar,lanarkshire ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk parameter all colous units reverse voltage 6 v forward current 30 ma surage current (t>10us) 1 a storage temperature range -55 to +100 c junction temperature (tj) 100 c total power dissipation @ 25 c 100 mw thremal resistance juction to air 400 k/w blue 5 20 0.1 -40 to +100 100 100 400 parameter unit colour orange hered yellow green peak wavelength p nm 605 635 585 565 forward voltage vf (if = 20ma) volts max 3 3 3 3 reverse current ir (vr = 6volts) a max 10 10 10 10 lumenous intensity (if = 10ma) mcd min 1.6 6.3 6.3 6.3 blue 428 4.5 5 6.3 ordering information to specify your requirement, please state: 1 6 way SSA360/6,10 way ssa350/10 2 the combination of leds in order. ssa-360/10 a throught to j where x = o = all orange, h = all hered , y = all yellow, g = all green for mixed colours specify from left to right . e.g. ssa-350/10 hhgyygrrbb 1st element to 10th element custom part numbers will be issued for these combinations. SSA360/6 SSA360/10 4.5.06
|