for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 78 hmc214ms8 / 214MS8E high ip3 gaas mmic mixer, 2.4 - 4.0 ghz v01.1109 general description features functional diagram input ip3: +34 dbm lo to rf isolation: 28 db +22 dbm input p1db no external components ultra small msop package: 14.8mm 2 included in the hmc-dk003 designers kit electrical speci cations, t a = +25c, lo = +17dbm, if = 200 mhz* typical applications the hmc214ms8 / hmc214MS8E is ideal for: ? wimax, 802.16 ? fixed wireless access ? wireless local loop *unless otherwise noted, all measurements performed as a downconverter, with low side lo & if = 200 mhz. the hmc214ms8(e) is a general purpose high dynamic range passive mmic mixer in plastic sur- face mount 8 lead mini small outline package (msop) covering 2.4 to 4 ghz. excellent input ip3 performance of +34 dbm for downcon-ver- sion and +31 dbm for upconversion is provided for wimax and other 3.5 ghz applications at an lo drive of +17 dbm. with a 1db compression of +22 dbm, the rf port will accept a wide range of input signal levels. conversion loss is 10 db typical and lo isolations are maintained at 25 to 30 db. this miniature single-ended monolithic gaas fet mixer does not require any external components or bias. the dc to 1 ghz if frequency response will satisfy many transmit and receive frequency plans con gured for low side lo. the hmc214ms8 & hmc214MS8E input ip3 performance coupled with its high p1db rivals traditional active fet mixers while offering a much smaller 14.8mm 2 standard ic footprint and no dc bias. parameter min. typ. max. min. typ. max. units frequency range, rf 2.4 - 4.0 3.4 - 3.8 ghz frequency range, lo 2.4 - 4.0 3.4 - 3.8 ghz frequency range, if dc - 1 dc - 1 ghz conversion loss 10 12 10 11.5 db noise figure (ssb) 10 12 10 11.5 db lo to rf isolation 18 30 20 28 db lo to if isolation 12 25 22 30 db ip3 (input) 26 30 31 34 dbm 1 db gain compression (input) 18 21 20 22 dbm lo input drive level (typical) +15 to +19 +15 to +19 dbm
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 79 conversion gain vs. temperature @ lo = +17 dbm isolation @ lo = +17 dbm conversion gain vs. lo drive return loss @ lo = +17 dbm if bandwidth @ lo = +17 dbm upconverter performance conversion gain @ lo = +17 dbm unless otherwise noted, all measurements performed as a downconverter, with low side lo & if = 200 mhz. -20 -15 -10 -5 0 2.2 2.6 3 3.4 3.8 4.2 +25 c +85 c -40 c conversion gain (db) rf frequency (ghz) -40 -30 -20 -10 0 2.2 2.6 3 3.4 3.8 4.2 rf to if lo to rf lo to if isolation (db) frequency (ghz) -25 -20 -15 -10 -5 0 2.2 2.6 3 3.4 3.8 4.2 rf lo return loss (db) frequency (ghz) -20 -16 -12 -8 -4 0 2.2 2.6 3 3.4 3.8 4.2 conversion gain (db) rf frequency (ghz) -20 -15 -10 -5 0 2.2 2.6 3 3.4 3.8 4.2 lo = +15 dbm lo = +16 dbm lo = +17 dbm lo = +19 dbm conversion gain (db) rf frequency (ghz) -20 -15 -10 -5 0 0 0.2 0.4 0.6 0.8 1 conver. gain return loss response (db) if frequency (ghz) hmc214ms8 / 214MS8E high ip3 gaas mmic mixer, 2.4 - 4.0 ghz v01.1109
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 80 input ip3 vs. temperature, lo = +17 dbm input ip3 vs. lo drive upconverter ip3 vs. lo drive, if = 200 mhz input p1db vs. temperature @ lo = +17 dbm unless otherwise noted, all measurements performed as a downconverter, with low side lo & if = 200 mhz. 20 24 28 32 36 40 2.2 2.6 3 3.4 3.8 4.2 lo = +15 dbm lo = +16 dbm lo = +17 dbm lo = +19 dbm ip3 (dbm) rf frequency (ghz) 20 25 30 35 40 45 2.2 2.6 3 3.4 3.8 4.2 lo = +15 dbm lo = +16 dbm lo = +17 dbm lo = +19 dbm ip3 (dbm) rf frequency (ghz) 20 25 30 35 40 45 2.2 2.6 3 3.4 3.8 4.2 +25 c +85 c -40 c ip3 (dbm) rf frequency (ghz) 15 17 19 21 23 25 2.2 2.6 3 3.4 3.8 4.2 +25 c +85 c -40 c p1db (dbm) rf frequency (ghz) hmc214ms8 / 214MS8E high ip3 gaas mmic mixer, 2.4 - 4.0 ghz v01.1109 mxn spurious outputs nlo mrf01234 0xx-4-29xx 190373935 27366496577 397981048591 4xx10099104106 rf freq = 3.5 ghz @ -10 dbm lo freq = 3.3 ghz @ +17 dbm all values in dbc relative to the if output power. harmonics of lo nlo spur @ rf port lo freq (ghz) 1 2 3 4 2.6 35 26 42 39 2.8 30 26 47 40 3.0 29 26 46 42 3.2 28 29 42 xx 3.4 25 28 40 xx 3.6 24 31 39 xx lo = +17 dbm all values are in dbc below input lo level @ rf port.
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 81 unless otherwise noted, all measurements performed as a downconverter, with low side lo & if = 200 mhz. absolute maximum ratings electrostatic sensitive device observe handling precautions rf/if input +27 dbm lo drive +27 dbm if dc current 40 ma channel temperature 150 c continuous pdiss (t=85 c) (derate 3.69 mw/c above 85 c) 240 mw thermal resistance (r th ) (junction to lead) 270 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c esd sensitivity (hbm) class 1a hmc214ms8 / 214MS8E high ip3 gaas mmic mixer, 2.4 - 4.0 ghz v01.1109 outline drawing notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. dimension does not include moldflash of 0.15mm per side. 4. dimension does not include moldflash of 0.25mm per side. 5. all ground leads must be soldered to pcb rf ground. part number package body material lead finish msl rating package marking [3] hmc214ms8 low stress injection molded plastic sn/pb solder msl1 [1] h214 xxxx hmc214MS8E rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h214 xxxx [1] max peak re ow temperature of 235 c [2] max peak re ow temperature of 260 c [3] 4-digit lot number xxxx package information
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 82 pin number function description interface schematic 1lo this pin is dc coupled & matched to 50 ohms. blocking capacitors are required if line potential is not equal to 0v. 2, 4 n/c the pins are not connected internally; however, all data shown herein was measured with these pins connected to rf/dc ground externally. 3, 6, 7 gnd this pin must be connected to rf ground. 5if this pin is dc coupled. for applications not requiring operation to dc this port should be dc blocked externally using a series capacitor. choose value of capacitor to pass if frequency desired. for operation to dc, this pin must not sink/source more than 40 ma of current or failure may result. 8rf this pin is dc coupled and matched to 50 ohms. pin descriptions hmc214ms8 / 214MS8E high ip3 gaas mmic mixer, 2.4 - 4.0 ghz v01.1109
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com mixers - single & double balanced - smt 9 9 - 83 evaluation pcb list of materials for evaluation pcb 101830 [1] item description j1 - j3 pcb mount sma rf connector u1 hmc214ms8 / hmc214MS8E mixer pcb [2] 101828 eval board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 the circuit board used in the nal application should use rf circuit design techniques. signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request. hmc214ms8 / 214MS8E high ip3 gaas mmic mixer, 2.4 - 4.0 ghz v01.1109
|
