customer drawing title: soldersleeve shield terminator unless otherwise specified dimensions are in millimeters.[inches dimensions are shown in brackets] raychem devices document no.: D-101-31 tolerances: 0.00 n/a 0.0 n/a 0 n/a angles: n/a roughness in micron tyco electronics co rporation reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev: c date: june 9, 2011 prepared by: ynguyen cage code: 06090 eco number: eco-11-011935 scale: nts size: a sheet: 1 of 1 ? 2009-2011 tyco electronics corporation. all rights reserved. if this document is printed it becomes unc ontrolled. check for the latest revision. product dimensions cable dimensions product name l max ?a min ?b min ?d max ?e min ?g max j ? 0.5 (j ? 0.02) D-101-31 17.25 (0.680) 4.55 (0.180) 5.00 (0.200) 5.00 (0.200) 2.5 (0.100) 4.55 (0.180) 7 (0.275) materials 1. insulation sleeve: heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene fluoride. 2. solder preform with flux: solder: type sn63 per ansi-j-std-006. flux: type rom1 per ansi-j-std-004. 3. meltable ring: thermally stabili zed thermoplastic. color: gray. 4. meltable ring: thermally stabili zed thermoplastic. color: blue. application 1. this part is designed to provide an environmen t protected shield termination on cables, rated for 125 ? c minimum, meeting the dimensional criteria listed, ha ving nickel plated copper shields. 2. install using te approved convection or infrared tool s in accordance with te assembly procedure rcps-100-70. 3. assemblies will meet requirements of te specifica tion rt-1404 and national ae rospace standard nas-1747. 4. temperature range: -55 ? c to +150 ? c. for best results, prepare the cable as shown:
|
