|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
micropower, low noise precision voltage references with shutdown adr391/adr392/adr395 rev. h information furnished by analog devices is believed to be accurate and reliable. however, no responsibility is assumed by analog devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. specifications subject to change without notice. no license is granted by implication or otherwise under any patent or patent rights of analog devices. trademarks and registered trademarks are the property of their respective owners. one technology way, p.o. box 9106, norwood, ma 02062-9106, u.s.a. tel: 781.329.4700 www.analog.com fax: 781.461.3113 ?2002C2009 analog devices, inc. all rights reserved. features compact 5-lead tsot package low temperature coefficient b grade: 9 ppm/c a grade: 25 ppm/c initial accuracy b grade: 4 mv maximum (adr391) a grade: 6 mv maximum ultralow output noise: 5 v p-p (0.1 hz to 10 hz) low dropout: 300 mv low supply current 3 a maximum in shutdown 140 a maximum in operation no external capacitor required output current: 5 ma automotive grade available wide temperature range: ?40c to +125c applications battery-powered instrumentation portable medical instrumentation data acquisition systems industrial process controls automotive pin configuration 1 2 3 5 4 gnd shdn v out (sense) v out (force) v in 00419-001 adr391/ adr392/ adr395 (not to scale) figure 1. 5-lead tsot (uj suffix) table 1. model output voltage (v o ) temperature coefficient (ppm/c) accuracy (mv) adr391b 2.5 9 4 ADR391A 2.5 25 6 adr392b 4.096 9 5 adr392a 4.096 25 6 adr395b 5.0 9 5 adr395a 5.0 25 6 general description the adr391/adr392/adr395 are precision 2.048 v, 2.5 v, 4.096 v, and 5 v band gap voltage references, respectively, featuring low power and high precision in a tiny footprint. using patented temperature drift curvature correction techniques from analog devices, inc., the adr39x references achieve a low 9 ppm/c of temperature drift in the tsot package. the adr39x family of micropower, low dropout voltage references provides a stable output voltage from a minimum supply of 300 mv above the output. their advanced design eliminates the need for external capacitors, which further reduces board space and system cost. the combination of low power operation, small size, and ease of use makes the adr39x precision voltage references ideally suited for battery-operated applications.
adr391/adr392/adr395 rev. h | page 2 of 20 table of contents features .............................................................................................. 1 ? applications ....................................................................................... 1 ? pin configuration ............................................................................. 1 ? general description ......................................................................... 1 ? revision history ............................................................................... 2 ? specifications ..................................................................................... 3 ? adr391 electrical ch aracteristics ............................................. 3 ? adr392 electrical ch aracteristics ............................................. 4 ? adr395 electrical ch aracteristics ............................................. 5 ? absolute maximum ratings ............................................................ 6 ? thermal resistance ...................................................................... 6 ? esd caution...................................................................................6 ? typical performance characteristics ..............................................7 ? terminology .................................................................................... 13 ? theory of operation ...................................................................... 14 ? device power dissipation considerations .............................. 14 ? shutdown mode operation ...................................................... 14 ? applications information .............................................................. 15 ? basic voltage reference connection ....................................... 15 ? capacitors .................................................................................... 17 ? outline dimensions ....................................................................... 18 ? ordering guide .......................................................................... 18 ? revision history 10/09rev. g to rev. h deleted adr390 ................................................................. universal changes to ordering guide section ............................................ 18 2/08rev. f to rev. g changes to ripple rejection ration parameter (table 2) ........... 3 changes to ripple rejection ration parameter (table 3) ........... 4 changes to ripple rejection ration parameter (table 4) ........... 5 changes to ripple rejection ration parameter (table 5) ........... 6 changes to figure 7 .......................................................................... 9 changes to outline dimensions ................................................... 19 changes to ordering guide .......................................................... 19 5/05rev. e to rev. f changes to table 5 ............................................................................ 7 changes to figure 2 .......................................................................... 9 4/04rev. d to rev. e changes to adr390specifications ............................................. 3 changes to adr391specifications ............................................. 4 changes to adr392specifications ............................................. 5 changes to adr395specifications ............................................. 6 4/04rev. c to rev. d updated format .................................................................. universal changes to title ................................................................................ 1 changes to features .......................................................................... 1 changes to applications .................................................................. 1 changes to general description .................................................... 1 changes to table 1 ............................................................................ 1 changes to adr390specifications ............................................. 3 changes to adr391specifications ............................................. 4 changes to adr392specifications ............................................. 5 changes to adr395specifications ............................................. 6 changes to absolute maximum ratings ........................................ 7 changes to thermal resistance....................................................... 7 moved esd caution.......................................................................... 7 changes to figure 3, figure 4, figure 7, and figure 8 .................. 9 changes to figure 11, figure 12, figure 13, and figure 14....... 10 changes to figure 15, figure 16, figure 19, and figure 20....... 11 changes to figure 23 and figure 24............................................. 12 changes to figure 27 ...................................................................... 13 changes to ordering guide .......................................................... 19 updated outline dimensions ....................................................... 19 10/02rev. b to rev. c add parts adr392 and adr395 ..................................... universal changes to features .......................................................................... 1 changes to general description ..................................................... 1 additions to table i ........................................................................... 1 changes to specifications ................................................................. 2 changes to ordering guide ............................................................. 4 changes to absolute maximum ratings ........................................ 4 new tpcs 3, 4, 7, 8, 11, 12, 15, 16, 19, and 20 .............................. 6 new figures 4 and 5 ....................................................................... 13 deleted a negative precision reference without precision resistors section ............................................. 13 edits to general-purpose current source section .................... 13 updated outline dimensions ....................................................... 15 5/02rev. a to rev. b edits to layout .................................................................... universal changes to figure 6 ........................................................................ 13 adr391/adr392/adr395 rev. h | page 3 of 20 specifications adr391 electrical characteristics v in = 2.8 v to 15 v, t a = 25c, unless otherwise noted. table 2. parameter symbol conditions min typ max unit output voltage v o a grade 2.494 2.5 2.506 v b grade 2.496 2.5 2.504 v initial accuracy v oerr a grade 6 mv a grade 0.24 % b grade 4 mv b grade 0.16 % temperature coefficient tcv o a grade, ?40c < t a < +125c 25 ppm/c b grade, ?40c < t a < +125c 9 ppm/c supply voltage headroom v in ? v o 300 mv line regulation v o /v in v in = 2.8 v to 15 v, ?40c < t a < +125c 10 25 ppm/v load regulation v o /i load i load = 0 ma to 5 ma, ?40c < t a < +85c, v in = 3 v 60 ppm/ma i load = 0 ma to 5 ma, ?40c < t a < +125c, v in = 3 v 140 ppm/ma quiescent current i in no load 120 a ?40c < t a < +125c 140 a voltage noise e n p-p 0.1 hz to 10 hz 5 v p-p turn-on settling time t r 20 s long-term stability 1 v o 1000 hours 50 ppm output voltage hysteresis v o_hys 100 ppm ripple rejection ratio rrr f in = 60 hz ?80 db short circuit to gnd i sc v in = 5 v 25 ma v in = 15 v 30 ma shutdown pin shutdown supply current i shdn 3 a shutdown logic input current i logic 500 na shutdown logic low v inl 0.8 v shutdown logic high v inh 2.4 v 1 the long-term stability specification is noncumulative. the drift of subsequent 1000 hour periods is significantly lower than in the first 1000 hour period. adr391/adr392/adr395 rev. h | page 4 of 20 adr392 electrical characteristics v in = 4.3 v to 15 v, t a = 25c, unless otherwise noted. table 3. parameter symbol conditions min typ max unit output voltage v o a grade 4.090 4.096 4.102 v b grade 4.091 4.096 4.101 v initial accuracy v oerr a grade 6 mv a grade 0.15 % b grade 5 mv b grade 0.12 % temperature coefficient tcv o a grade, ?40c < t a < +125c 25 ppm/c b grade, ?40c < t a < +125c 9 ppm/c supply voltage headroom v in ? v o 300 mv line regulation v o /v in v in = 4.3 v to 15 v, ?40c < t a < +125c 10 25 ppm/v load regulation v o /i load i load = 0 ma to 5 ma, ?40c < t a < +125c, v in = 5 v 140 ppm/ma quiescent current i in no load 120 a ?40c < t a < +125c 140 a voltage noise e n p-p 0.1 hz to 10 hz 7 v p-p turn-on settling time t r 20 s long-term stability 1 v o 1000 hours 50 ppm output voltage hysteresis v o_hys 100 ppm ripple rejection ratio rrr f in = 60 hz ?80 db short circuit to gnd i sc v in = 5 v 25 ma v in = 15 v 30 ma shutdown pin shutdown supply current i shdn 3 a shutdown logic input current i logic 500 na shutdown logic low v inl 0.8 v shutdown logic high v inh 2.4 v 1 the long-term stability specification is noncumulative. the drift of subsequent 1000 hour periods is significantly lower than in the first 1000 hour period. adr391/adr392/adr395 rev. h | page 5 of 20 adr395 electrical characteristics v in = 5.3 v to 15 v, t a = 25c, unless otherwise noted. table 4. parameter symbol conditions min typ max unit output voltage v o a grade 4.994 5.000 5.006 v b grade 4.995 5.000 5.005 v initial accuracy v oerr a grade 6 mv a grade 0.12 % b grade 5 mv b grade 0.10 % temperature coefficient tcv o a grade, ?40c < t a < +125c 25 ppm/c b grade, ?40c < t a < +125c 9 ppm/c supply voltage headroom v in ? v o 300 mv line regulation v o /v in v in = 4.3 v to 15 v, ?40c < t a < +125c 10 25 ppm/v load regulation v o /i load i load = 0 ma to 5 ma, ?40c < t a < +125c, v in = 6 v 140 ppm/ma quiescent current i in no load 120 a ?40c < t a < +125c 140 a voltage noise e n p-p 0.1 hz to 10 hz 8 v p-p turn-on settling time t r 20 s long-term stability 1 v o 1000 hours 50 ppm output voltage hysteresis v o_hys 100 ppm ripple rejection ratio rrr f in = 60 hz ?80 db short circuit to gnd i sc v in = 5 v 25 ma v in = 15 v 30 ma shutdown pin shutdown supply current i shdn 3 a shutdown logic input current i logic 500 na shutdown logic low v inl 0.8 v shutdown logic high v inh 2.4 v 1 the long-term stability specification is noncumulative. the drift of subsequent 1000 hour periods is significantly lower than in the first 1000 hour period. adr391/adr392/adr395 rev. h | page 6 of 20 absolute maximum ratings at 25c, unless otherwise noted. table 5. parameter rating supply voltage 18 v output short-circuit duration to gnd see derating curves storage temperature range ?65c to +125c operating temperature range ?40c to +125c junction temperature range ?65c to +125c lead temperature (soldering, 60 sec) 300c stresses above those listed under absolute maximum ratings may cause permanent damage to the device. this is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. exposure to absolute maximum rating conditions for extended periods may affect device reliability. thermal resistance ja is specified for the worst-case conditions, that is, for a device soldered in a circuit board for surface-mount packages. table 6. package type ja jc unit tsot (uj-5) 230 146 c/w esd caution adr391/adr392/adr395 rev. h | page 7 of 20 typical performance characteristics 2.494 ?40 ?5 30 65 100 125 2.496 2.498 2.500 2.502 2.504 2.506 sample 1 sample 2 sample 3 temperature (c) v out (v) 00419-004 figure 2. adr391 output voltage (v out ) vs. temperature 4.100 ?40 0 40 80 125 4.098 4.096 4.094 4.090 4.088 4.092 sample 1 sample 2 sample 3 temperature (c) v out (v) 00419-005 figure 3. adr392 output voltage (v out ) vs. temperature 5.006 ?40 ?5 30 65 125 5.004 5.002 5.000 4.996 4.994 4.998 100 sample 1 sample 2 sample 3 temperature (c) v out (v) 00419-006 figure 4. adr395 output voltage (v out ) vs. temperature input voltage (v) 140 120 40 2.5 15.0 5.0 supply current (a) 7.5 10.0 12.5 100 80 60 +85c +25c ?40c 00419-008 +125c figure 5. adr391 supply current vs. input voltage i n p u t vo ltag e ( v ) 140 5791 1 supply current (a) 120 100 60 40 80 13 1 5 +125 c +25c ?40c 00419-009 figure 6. adr392 supply current vs. input voltage input voltage (v) 140 5.5 7.0 8.5 10.0 14.5 supply current (a) 120 100 60 40 80 13.0 +125 c +25 c ?40 c 11.5 00419-010 figure 7. adr395 supply current vs. input voltage adr391/adr392/adr395 rev. h | page 8 of 20 temperature ( c) 80 ?40 ?10 load regul a tion (ppm/ma) 50 80 110 125 100 120 140 160 180 20 i l = 0ma to 5ma v in = 3v v in = 5v 00419-012 figure 8. adr391 load regulation vs. temperature temperature (c) 90 ?40 ?5 30 65 125 load regul a tion (ppm/ma) 80 70 50 40 60 100 i l = 0ma to 5ma v in = 7.5v v in = 5v 00419-013 figure 9. adr392 load regulation vs. temperature temperature (c) 80 ?40 ?5 30 65 125 load regul a tion (ppm/ma) 70 60 40 30 50 100 i l = 0ma to 5ma v in = 7.5v v in = 5v 00419-014 figure 10. adr395 load regulation vs. temperature temperature (c) 0 line regulation (ppm/v) 25 5 10 15 20 00419-016 ?40 ?10 20 80 110 125 50 figure 11. adr391 line regulation vs. temperature temperature (c) 14 ?40 ?5 30 65 125 line regul a tion (ppm/v) 10 6 2 0 4 100 12 8 v in = 4.4v to 15v 00419-017 figure 12. adr392 line regulation vs. temperature temperature (c) 14 ?40 ?5 30 65 125 line regul a tion (ppm/v) 10 6 2 0 4 100 12 8 v in = 5.3v to 15v 00419-018 figure 13. adr395 line regulation vs. temperature adr391/adr392/adr395 rev. h | page 9 of 20 load current (ma) 3.6 2.6 01 3.4 3.2 2.8 ?40 c +85 c +25 c 234 5 3.0 +125 c 00419-020 v in min (v) figure 14. adr391 minimum input voltage (v in ) vs. load current load current (ma) 4.8 0123 5 v in min (v) 4.4 4.0 3.8 4.2 4 4.6 +125 c +25c ?40c 0 0419-021 figure 15. adr392 minimum input voltage (v in ) vs. load current load current (ma) 6.0 0123 5 v in min (v) 5.2 4.8 4.6 5.0 4 5.6 +125 c +25 c ?40 c 5.8 5.4 00419-022 figure 16. adr395 minimum input voltage (v in ) vs. load current 70 50 0 ?0.56 ?0.26 frequen c y 0.04 0.19 40 30 20 10 ?0.41 ?0.11 0.34 60 temperature: +25 c ?40 c +125c +25c 00419-024 v out deviation (mv) figure 17. adr391 v out hysteresis distribution 1k 900 800 700 600 100 10 100 1k 10k frequency (hz) voltage noise density (nv/ hz) 500 400 300 200 adr391 v in = 5v 00419-025 figure 18. voltage noise density vs. frequency voltage (2v/div) time (1s/div) 0 0 0 0 0 0 0 0 0 0 0419-026 figure 19. adr391 typical voltage noise 0.1 hz to 10 hz adr391/adr392/adr395 rev. h | page 10 of 20 voltage (100v/div) time (10s/div) 00419-027 figure 20. adr391 voltage noise 10 hz to 10 khz voltage time (10s/div) 0.5v/div 1v/div 00419-028 line interruption v out c bypass = 0f figure 21. adr391 line transient response vol t age time (10 s/div) 0.5v/div 1v/div 00419-029 line interruption v out c bypass = 0.1f figure 22. adr391 line transient response voltage (1v/div) time (200s/div) load off 00419-030 v out c l = 0nf v load on figure 23. adr391 load transient response voltage (1v/div) time (200 s/div) load off 00419-031 v out c l = 1nf v load on figure 24. adr391 load transient response voltage (1v/div) time (200 s/div) load off 00419-032 v out c l = 100nf v load on figure 25. adr391 load transient response adr391/adr392/adr395 rev. h | page 11 of 20 voltage time (20s/div) 5v/div 2v/div 00419-033 v in = 15v v in v out figure 26. adr391 turn-on response time at 15 v voltage time (40s/div) 5v/div 2v/div 00419-034 v in = 15v v in v out figure 27. adr391 turn-off response at 15 v voltage time (200s/div) 5v/div 2v/div 00419-035 c bypass = 0.1f v in v out figure 28. adr391 turn-on/turn-off response at 5 v with capacitance voltage time (200s/div) 5v/div 2v/div 00419-036 r l = 500 ? v in v out figure 29. adr391 turn-on/turn-off response at 5 v with resistor load voltage time (200 s/div) 5v/div 2v/div 00419-037 r l = 500 ? c l = 100nf v in v out figure 30. adr391 turn-on/turn-off response at 5 v adr391/adr392/adr395 rev. h | page 12 of 20 frequency (hz) 10 1m 100 output impedance ( ? ) 1k 10k 100k 100 90 0 80 70 60 50 40 30 20 10 00419-039 c l = 0f c l = 1f c l = 0.1f frequency (hz) 10 1m 100 ripple rejection (db) 1k 10k 100k 80 60 ?120 40 20 0 ?20 ?40 ?60 ?80 ?100 00419-038 figure 32. output im pedance vs. frequency figure 31. ripple rejection vs. frequency adr391/adr392/adr395 rev. h | page 13 of 20 terminology temperature coefficient the change of output voltage with respect to operating temperature changes normalized by the output voltage at 25c. this parameter is expressed in ppm/c and can be determined by [] () () () () 6 10 Cc25 C cppm/ = 12 o 1 o 2 o o tt v tvtv tcv (1) where: v o (25c) is v o at 25c. v o ( t 1 ) is v o at temperature 1. v o ( t 2 ) is v o at temperature 2. line regulation the change in output voltage due to a specified change in input voltage. this parameter accounts for the effects of self-heating. line regulation is expressed in either percent per volt, parts-per- million per volt, or microvolts per volt change in input voltage. load regulation the change in output voltage due to a specified change in load current. this parameter accounts for the effects of self-heating. load regulation is expressed in either microvolts per milliampere, parts-per-million per milliampere, or ohms of dc output resistance. long-term stability typical shift of output voltage at 25c on a sample of parts subjected to a test of 1000 hours at 25c. v o = v o ( t 0 ) ? v o ( t 1 ) ? ? ? ? ? ? ? ? ? = 6 10 )( )()( ]ppm[ 0 o 1 o 0 o o tv tvtv v (2) where: v o ( t 0 ) is v o at 25c at time 0. v o ( t 1 ) is v o at 25c after 1000 hours operation at 25c. thermally induced output voltage hysteresis the change of output voltage after the device cycles through the temperatures from +25c to C40c to +125c and back to +25c. this is a typical value from a sample of parts put through such a cycle. v o_hys = v o (25c) ? v o_tc (3) 6 _ _ 10 )25( )25( ]ppm[ ? = cv vcv v o tc o o hys o o o (4) where: v o (25c) is v o at 25c. v o_tc is v o at 25c after a temperature cycle from +25c to ?40c to +125c and back to +25c. adr391/adr392/adr395 rev. h | page 14 of 20 theory of operation band gap references are the high performance solution for low supply voltage and low power voltage reference applications, and the adr391/adr392/adr395 are no exception. the uniqueness of these devices lies in the architecture. as shown in figure 33 , the ideal zero tc band gap voltage is referenced to the output, not to ground. therefore, if noise exists on the ground line, it is greatly attenuated on v out . the band gap cell consists of the pnp pair, q51 and q52, running at unequal current densities. the difference in v be results in a voltage with a positive tc, which is amplified by a ratio of r54 r58 2 this ptat voltage, combined with v be s of q51 and q52, produces a stable band gap voltage. reduction in the band gap curvature is performed by the ratio of resistors r44 and r59, one of which is linearly temperature dependent. precision laser trimming and other patented circuit techniques are used to further enhance the drift performance. shdn r60 q51 r54 r61 r53 q52 r58 r59 r44 r48 r49 q1 gnd 00419-040 v in v out (force) v out (sense) figure 33. simplified schematic device power dissipation considerations the adr391/adr392/adr395 are capable of delivering load currents to 5 ma, with an input voltage that ranges from 2.8 v (adr391 only) to 15 v. when these devices are used in applications with large input voltages, care should be taken to avoid exceeding the specified maximum power dissipation or junction temperature because it could result in premature device failure. the following formula should be used to calculate the maximum junction temperature or dissipation of the device: ja a j d tt p = C (5) where: t j and t a are, respectively, the junction and ambient temperatures. p d is the device power dissipation. ja is the device package thermal resistance. shutdown mode operation the adr391/adr392/adr395 include a shutdown feature that is ttl/cmos level compatible. a logic low or a zero volt condition on the shdn pin is required to turn the devices off. during shutdown, the output of the reference becomes a high impedance state, where its potential would then be determined by external circuitry. if the shutdown feature is not used, the shdn pin should be connected to v in (pin 2). adr391/adr392/adr395 rev. h | page 15 of 20 applications information basic voltage reference connection the circuit shown in figure 34 illustrates the basic configuration for the adr39x family. decoupling capacitors are not required for circuit stability. the adr39x family is capable of driving capacitive loads from 0 f to 10 f. however, a 0.1 f ceramic output capacitor is recommended to absorb and deliver the charge, as required by a dynamic load. s hutdown input c b 0.1f c b 0.1f * * output *not required adr39x shdn gnd v out (sense) v in v out (force) 00419-041 figure 34. basic configuration for the adr39x family stacking reference ics for arbitrary outputs some applications may require two reference voltage sources, which are a combined sum of standard outputs. figure 35 shows how this stacked output reference can be implemented. gnd u2 u1 c2 0.1f c2 0.1f output table u1/u2 shdn v out (sense) v out (force) v in v out1 v out2 v in v out1 (v) v out2 (v) adr391/adr391 adr392/adr392 adr395/adr395 2.5 4.096 5 5.0 8.192 10 00419-042 gnd shdn v out (sense) v out (force) v in figure 35. stacking voltage references with the adr391/adr392/adr395 two reference ics are used, fed from an unregulated input, v in . the outputs of the individual ics are connected in series, which provide two output voltages, v out1 and v out2 . v out1 is the terminal voltage of u1, while v out2 is the sum of this voltage and the terminal voltage of u2. u1 and u2 are chosen for the two voltages that supply the required outputs (see the output table in figure 35 ). for example, if both u1 and u2 are adr391s, v out1 is 2.5 v and v out2 is 5.0 v. while this concept is simple, a precaution is required. because the lower reference circuit must sink a small bias current from u2 plus the base current from the series pnp output transistor in u2, either the external load of u1 or an external resistor must provide a path for this current. if the u1 minimum load is not well defined, the external resistor should be used and set to a value that conservatively passes 600 a of current with the applicable v out1 across it. note that the two u1 and u2 reference circuits are treated locally as macrocells; each has its own bypasses at input and output for best stability. both u1 and u2 in this circuit can source dc currents up to their full rating. the minimum input voltage, v in , is determined by the sum of the outputs, v out2 , plus the dropout voltage of u2. a negative precision reference without precision resistors a negative reference can be easily generated by adding an a1 op amp and is configured as shown in figure 36 . v out (force) and v out (sense) are at virtual ground and, therefore, the negative reference can be taken directly from the output of the op amp. the op amp must be dual-supply, low offset, and rail-to-rail if the negative supply voltage is close to the reference output. gnd a1 shdn + v dd v out (force) v out (sense) ?v dd v in ?v ref 00419-043 figure 36. negative reference adr391/adr392/adr395 rev. h | page 16 of 20 general-purpose current source many times in low power applications, the need arises for a precision current source that can operate on low supply voltages. the adr391/adr392/adr395 can be configured as a precision current source. as shown in figure 37 , the circuit configuration is a floating current source with a grounded load. the reference output voltage is bootstrapped across r set , which sets the output current into the load. with this configuration, circuit precision is maintained for load currents in the range from the reference supply current, typically 90 a to approximately 5 ma. adr39x gnd r1 p1 r1 0.1f shdn v in v in v out (force) v out (sense) i set r set i out = i set + i sy (i set ) r l i sy adjust i sy (i set ) 00419-044 figure 37. a general-purpose current source high power performance with current limit in some cases, the user may want higher output current delivered to a load and still achieve better than 0.5% accuracy out of the adr39x. the accuracy for a reference is normally specified on the data sheet with no load. however, the output voltage changes with load current. the circuit shown in figure 38 provides high current without compromising the accuracy of the adr39x. the series pass transistor, q1, provides up to 1 a load current. the adr39x delivers only the base drive to q1 through the force pin. the sense pin of the adr39x is a regulated output and is connected to the load. the transistor q2 protects q1 during short-circuit limit faults by robbing its base drive. the maximum current is i lmax 0.6 v/ r s (6) shdn gnd u1 adr39x 00419-045 v in v in v out (force) r l i l r s v out (sense) q2 q2n2222 r1 4.7k ? q1 q2n4921 figure 38. adr39x for high power performance with current limit a similar circuit function can also be achieved with the darlington transistor configuration, as shown in figure 39 . adr39x gnd u1 00419-d-046 shdn v in v in v out (force) r l r s v out (sense) q1 q2n2222 r1 4.7k ? q2 q2n4921 figure 39. adr39x for high output current with darlington drive configuration adr391/adr392/adr395 rev. h | page 17 of 20 ?150 drift (ppm) 150 time (hours) 0 ?100 ?50 0 50 100 100 200 300 400 500 600 700 1000 00419-002 900800 capacitors input capacitor input capacitors are not required on the adr39x. there is no limit for the value of the capacitor used on the input, but a 1 f to 10 f capacitor on the input improves transient response in applications where the supply suddenly changes. an additional 0.1 f in parallel also helps reduce noise from the supply. output capacitor the adr39x does not require output capacitors for stability under any load condition. an output capacitor, typically 0.1 f, filters out any low level noise voltage and does not affect the operation of the part. on the other hand, the load transient response can improve with the addition of a 1 f to 10 f output capacitor in parallel. a capacitor here acts as a source of stored energy for a sudden increase in load current. the only parameter that degrades by adding an output capacitor is the turn-on time, and it depends on the size of the capacitor chosen. figure 40. adr391 typical long-term drift over 1000 hours adr391/adr392/adr395 rev. h | page 18 of 20 outline dimensions * compliant to jedec standards mo-193-ab with the exception of package height and thickness. pin 1 1.60 bsc 2.80 bsc 1.90 bsc 0.95 bsc 0.20 0.08 0.60 0.45 0.30 8 4 0 0.50 0.30 0.10 max seating plane * 1.00 max * 0.90 0.87 0.84 2.90 bsc 54 12 3 figure 41. 5-lead thin small outline transistor package [tsot] (uj-5) dimensions shown in millimeters ordering guide model output voltage (v o ) initial accuracy temperature coefficient (ppm/c) package description package option branding ordering quantity temperature range (mv) (%) ADR391Aujz-reel7 1 2.5 6 0.24 25 5-lead tsot uj-5 r1a 3,000 ?40c to +125c ADR391Aujz-r2 1 2.5 6 0.24 25 5-lead tsot uj-5 r1a 250 ?40c to +125c adr391bujz-reel7 1 2.5 4 0.16 9 5-lead tsot uj-5 r1b 3,000 ?40c to +125c adr391bujz-r2 1 2.5 4 0.16 9 5-lead tsot uj-5 r1b 250 ?40c to +125c adr392aujz-reel7 1 4.096 6 0.15 25 5-lead tsot uj-5 rca 3,000 ?40c to +125c adr392aujz-r2 1 4.096 6 0.15 25 5-lead tsot uj-5 rca 250 ?40c to +125c adr392bujz-reel7 1 4.096 5 0.12 9 5-lead tsot uj-5 rcb 3,000 ?40c to +125c adr392bujz-r2 1 4.096 5 0.12 9 5-lead tsot uj-5 rcb 250 ?40c to +125c adr392wbujz-r7 1 , 2 4.096 5 0.12 9 5-lead tsot uj-5 rcb 3,000 ?40c to +125c adr395aujz-reel7 1 5.0 6 0.12 25 5-lead tsot uj-5 rda 3,000 ?40c to +125c adr395aujz-r2 1 5.0 6 0.12 25 5-lead tsot uj-5 rda 250 ?40c to +125c adr395bujz-reel7 1 5.0 5 0.10 9 5-lead tsot uj-5 rdb 3,000 ?40c to +125c adr395bujz-r2 1 5.0 5 0.10 9 5-lead tsot uj-5 rdb 250 ?40c to +125c 1 z = rohs compliant part. 2 automotive grade. adr391/adr392/adr395 rev. h | page 19 of 20 notes adr391/adr392/adr395 rev. h | page 20 of 20 notes ?2002C2009 analog devices, inc. all rights reserved. trademarks and registered trademarks are the prop erty of their respective owners. d00419-0-10/09(h) |
Price & Availability of ADR391A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |