data brief for further information contact your local stmicroelectronics sales office. october 2007 rev 1 1/4 4 STEVAL-MKI009V1 lis3lv02dl adapter board desi gned to be plugged into a standard dil 20 socket features complete lis3lv02dl pinout in standard dil 20 socket description the STEVAL-MKI009V1 adapter board is is based on the lis3lv02dl 3-axis digital output linear accelerometer and is intended to provide the user with an effective solution for fast system prototyping and device evaluation directly within the user?s application. the STEVAL-MKI009V1 is designed to be plugged into a standard dil 20 socket. it provides the user with the complete lis3lv02dl pinout, and comes ready-to-use with the required decoupling capacitors on the vdd power supply line. the pinout of the adapter is designed to be fully compatible with all other available adapter boards so that the user can easily switch from one sensor to another during evaluation without the need for board redesign. STEVAL-MKI009V1 www.st.com
board schematic STEVAL-MKI009V1 2/4 1 board schematic figure 1. scheme 1 2 3 4 5 6 7 8 9 10 11 12 header 12 jp1 24 23 22 21 20 19 18 17 16 15 14 13 header 12 jp2 rdy/ int 1 res 15 vd d 13 res 12 vd d 11 res 10 gn d 9 ck 8 nc 7 cs 6 scl/spc 5 vd d_ io 4 sda/sdi/sdo 3 sdo 2 gn d 16 gn d 14 lis3lv02dl + 10 uf c2 10 0n f c1 p01 p02 p03 p04 p05 p06 p07 p08 p09 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p01 p01 p01 p02 p02 p13 p13 p13 p13 p14 p22 p21 p20 p19 p24 p13 p01
STEVAL-MKI009V1 revision history 3/4 2 revision history table 1. document revision history date revision changes 16-oct-2007 1 initial release
STEVAL-MKI009V1 4/4 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, an y liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2007 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
