46 style l max w max h max s 0.1 h no. of leads (0.004) per side rh21 7.62 (0.300) 5.40 (0.213) 4.60 (0.181) 2.50 (0.098) 1.50 0.30 (0.059 0.012) 2 rh22 7.62 (0.300) 5.40 (0.213) 7.50 (0.295) 2.50 (0.098) 1.50 0.30 (0.059 0.012) 2 rh31 7.62 (0.300) 7.00 (0.270) 5.08 (0.200) 5.08 (0.200) 1.78 0.25 (0.070 0.010) 3 rh32 7.62 (0.300) 7.00 (0.270) 8.13 (0.320) 5.08 (0.200) 1.78 0.25 (0.070 0.010) 3 rh41 9.20 (0.362) 8.70 (0.342) 4.90 (0.192) 5.08 (0.200) 1.60 0.10 (0.062 0.004) 3 rh42 9.20 (0.362) 8.70 (0.342) 8.20 (0.323) 5.08 (0.200) 1.60 0.10 (0.062 0.004) 3 RH51 10.7 (0.421) 10.7 (0.421) 4.90 (0.192) 7.62 (0.300) 1.60 0.10 (0.062 0.004) 4 rh52 10.7 (0.421) 10.7 (0.421) 8.20 (0.323) 7.62 (0.300) 1.60 0.10 (0.062 0.004) 4 rh61 14.9 (0.586) 13.6 (0.535) 4.90 (0.192) 10.2 (0.400) 1.60 0.10 (0.062 0.004) 5 rh62 14.9 (0.586) 13.6 (0.535) 8.20 (0.323) 10.2 (0.400) 1.60 0.10 (0.062 0.004) 5 smps capacitors (rh style) rh - surface mount j lead range 0.047 f to 47.0 f low esr/esl 25v to 500 vdc x7r dielectric -55oc to +125oc this range of uncoated mlc capacitors are processed for input and output filter capacitors in high frequency dc-dc convertor applications above 10 watts e.g. telecomms and instrumentation, where high volume and low cost is required. these products are available in surface mount j leaded versions and can be supplied in bulk and tape/reel packaging. temperature coefficient cecc 30 000, (4.24.1) x7r: c temperature characteristic - 15%, -55oc to +125oc capacitance test measured at 1 vrms max at 1khz dissipation factor 25c 2.5% max at 1khz, 1 vrms max insulation resistance 25c 100k megohms or 1000 megohms-f, whichever is less dielectric withstanding voltage 25c (flash test) 250% rated voltage for 5 seconds with 50 ma max charging current. (500 volt units @ 150% rated voltage) life test (1000 hrs) cecc 30 000 (4.23) 200% rated voltage at +125oc. (500 volt units @ 120% rated voltage) thermal shock iec 68.2.14 -55oc to +125oc, 5 cycles resistance to solder heat iec 68.2.20 electrical specifications typical esr (m) 3 f, 100v x7r esr @ 100khz 17 esr @ 500khz 12 esr @ 1mhz 14 m1 m1 = m2 0.5 (0.020) m2 1.65 (0.065) 0.15 (0.006) 0.6 (0.024) 0.1 (0.004) w max. l max. h 0.25 (0.010)typ. h max. 1.4 (0.055) typ. s bend radius 90 5 2.54 (0.100) 0.05 (0.002) non-accum. dimensions millimeters (inches) dimensions millimeters (inches)
47 rh41 rh42 rh41 rh42 rh41 rh42 rh21 rh21 rh22 rh22 rh21 rh22 rh31 rh32 rh31 rh32 rh31 rh32 rh31 rh32 rh41 rh42 RH51 rh52 RH51 rh52 RH51 rh52 RH51 rh52 rh61 rh62 rh61 rh62 rh61 rh62 rh61 rh62 rh21/rh22 rh31/rh32 rh41/rh42 RH51/rh52 rh61/rh62 style style style style style voltage dc cap f 25 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 50 100 200 500 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.78 0.82 1 1.2 1.5 1.8 2.2 3 3.3 3.9 4.7 6.8 8.2 10 12 15 18 22 33 47 how to order rh 31 5 c 225 m a 3 0 a 3 style size voltage dielectric capacitance capacitance specification package lead dia. lead s pace lead style code code code code code tolerance code code code code code ( see table above) 3 = 25v c = x7r (2 significant k = 10% a = non 3 = waffle pack 0 = standar d a = standard 3 = j lead 5 = 50v digits + no. m = 20% customized a = tape & reel r = r ohs compliant 1 = 100v of zeros) 2 = 200v eg. 105 = 1 f 7 = 500v 104 = 0.1 f x7r stable dielectric packaging for availability of further parts in the rh21/rh22 series, contact manufacturing. smps capacitors (rh style) rh - surface mount j lead range style qty/reel 13" max. qty/waffle pack rh21 800 270 rh22 500 270 rh31 800 108 rh32 500 108 rh41 800 108 rh42 see note 100 RH51 750 88 rh52 see note 88 rh61 500 42 rh62 see note 42 note: t&r is not yet available. contact manufacturing for further information as this will be available in the future.
|
