13.18 16.24 3.54 5.08 5.08 0.85 3.2 +/-0.25 6.2 4.32 2.54 3.2 +0.2/-0.0 0.5 square 2.54 2.54 ssa 200 series 3 tier the ssa 200 series is a family of display devices using a blac k nylon 6 vo rated housing to mount three 3mm leds at right angles to a pcb. the pin out is in line on 0.1? . in any one batch the leds are lumenous intensity matched. ? accurate alignment of leds. ? low current and high- bright available. ? unique baseplate for accurate lead positioning. ? matched leds. ? shrouded led to reduce cross talk. bedford opto technology ltd 1 biggar business park, bi ggar,lanarkshire, ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e-mail: bill@bot.co.uk mechanical data 17.2.00 iss a pb this component is rohs compliant
ordering information dual led - SSA200xyz x = top led y = middle led z = bottom led indicate colour by using r = red o = orange y = yellow b = blank g = green b/c=red green bi-colour bedford opto te chnology ltd 1 biggar business park, biggar,lanarkshire, ml12 6fx tel: +44 (0) 1899 221221 fax: +44 (0) 1899 221009 website: bot.co.uk e- mail: bill@bot.co.uk ssa 200 absolute maximum ratings (t a = 25 o c) parameter red green yellow orange forward current 15ma 30ma 20ma 30ma power dissipation 40mw 100mw 60mw 100mw reverse current @ 5v 10 a 10 a 10 a 10 a operating temperature -40 c to +85 c storage temperature -40 c to 100 c lead soldering temperature for 5sec (2.0mm from body) 260 c red green 30ma 100mw 100 a colour lumenous in- tensity if = 10ma mcd peak wave- length nm viewing an- gle degrees forward voltage if = 20ma volts red min typ max 2.0 4.2 - - 697 - - 50 - 1.7 - 2.8 yellow min typ max 7.5 12 - - 585 - - 50 - 1.7 - 2.8 green min typ max 9.0 15 - - 565 - - 50 - 1.7 - 2.8 orange min typ max 7.5 12 - - 635 - - 50 - 1.7 - 2.8 red green bi-colour min typ max min typ max 2.2 @20ma 4.8 @20ma 2.2 @20ma 4.8 @20ma 630 565 200 200 2.0 2.8 2.1 2.8 opto electronic data (ta = 25 o c) 17.2.00 iss a pb this component is rohs compliant
|