ds16001 rev. 5 - 2 1 of 2 dl4001-dl4007 www.diodes.com diodes incorporated glass passivated junction high current capability low forward voltage drop low leakage current available in lead free finish/rohs compliant version (note 2) features dl4001 - dl4007 1.0a surface mount glass passivated rectifier notes: 1. measured at 1.0mhz and applied reverse voltage of 4.0 volts. 2. rohs revision 13.2.2003. glass and high temperature solder exemptions applied, see eu directive annex notes 5 and 7 . single phase, half wave, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25 c unless otherwise specified mechanical data case: melf case material: molded plastic. ul flammability classification rating 94v-0 terminals: solderable per mil-std-202, method 208 also available in lead free plating (matte tin finish). please see ordering information, note 3, on page 2 polarity: cathode band approx weight: 0.25 grams marking: cathode band only melf dim min max a 4.80 5.20 b 2.60 2.64 c 0.55 nominal all dimensions in mm c a b characteristic symbol dl 4001 dl 4002 dl 4003 dl 4004 dl 4005 dl 4006 dl 4007 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 71 141 283 424 566 707 v average forward rectified current @ t t = 75 c i o 1.0 a peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 30 a maximum forward voltage @ i f = 1.0a v fm 1.1 v maximum dc reverse current @ t a =25 c @rated dc blocking voltage @ t a = 100 c i rm 5.0 50 a typical thermal resistance, junction to ambient air r ja 50 c/w typical total capacitance (note 1) c t 15 pf operating and storage temperature range t j, t stg -55 to +150 c
(note 3) ds16001 rev. 5 - 2 2 of 2 dl4001-dl4007 www.diodes.com 40 60 80 100 120 140 160 180 0 0.2 0.4 0.6 0.8 1.0 i , average rectified current (a) o t , ambient temperature (oc) a fig. 1 forward current derating curve single phase half wave 60 hz resistive or inductive load 5 10 15 20 25 30 1 10 100 i peak f o rward surge current (a) fsm, number of cycles at 60 hz fig. 4 max non-repetitive peak forward surge current 8.3ms single half sine-wave 0 1 10 100 1 10 100 c , total capacitance (pf) t v , reverse voltage (v) r fig. 3 typical total capacitance vs. reverse voltage f = 1mhz t = 25oc j 0.01 0.1 1.0 i , instantaneous forward current (a) f v , instantaneous forward volt age (v) f fig. 2 typical forward characteristics 10 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 t = 25oc j pulse width = 300 ms 1% duty cycle note: 3. for lead free finish/rohs compliant version part number, please add "-f" suffix to the part number above. example: dl4005-13-f. device packaging shipping dl4001-13 melf 5,000/tape & reel dl4002-13 melf 5,000/tape & reel dl4003-13 melf 5,000/tape & reel DL4004-13 melf 5,000/tape & reel dl4005-13 melf 5,000/tape & reel dl4006-13 melf 5,000/tape & reel dl4007-13 melf 5,000/tape & reel ordering information
|