Part Number Hot Search : 
TPCA80 100BF 104M00 XXXXSX BU2508D HY57V16 KBU608 AM1523CE
Product Description
Full Text Search
 

To Download TC4424EMF713 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  ? 2004 microchip technology inc. ds21421d-page 1 tc4423/tc4424/tc4425 features ? high peak output current: 3a  wide input supply voltage operating range: - 4.5v to 18v  high capacitive load drive capability: - 1800 pf in 25 ns  short delay times: <40 ns (typ)  matched rise/fall times  low supply current: - with logic ? 1 ? input ? 3.5 ma (max) - with logic ? 0 ? input ? 350 a (max)  low output impedance: 3.5 ? (typ)  latch-up protected: will withstand 1.5a reverse current  logic input will withstand negative swing up to 5v  esd protected: 4 kv  pin compatible with the tc1426/tc1427/tc1428, tc4426/tc4427/tc4428 and tc4426a/ tc4427a/tc4428a devices.  space-saving 8-pin 6x5 dfn package applications  switch mode power supplies  pulse transformer drive  line drivers general description the tc4423/tc4424/tc4425 devices are a family of 3a, dual-output buffers/mosfet drivers. pin compati- ble with the tc1426/27/28, tc4426/27/28 and tc4426a/27a/28a dual 1.5a driver families, the tc4423/24/25 family has an increased latch-up current rating of 1.5a, making them even more robust for operation in harsh electrical environments. as mosfet drivers, the tc4423/tc4424/tc4425 can easily charge 1800 pf gate capacitance in under 35 nsec, providing low enough impedances in both the on and off states to ensure the mosfet's intended state will not be affected, even by large transients. the tc4423/tc4424/tc4425 inputs may be driven directly from either ttl or cmos (2.4v to 18v). in addition, the 300 mv of built-in hysteresis provides noise immunity and allows the device to be driven from slowly rising or falling waveforms. package types (1) 8-pin dfn (2) nc in a gnd in b 2 3 4 5 6 7 8 1 8-pin pdip 1 2 3 4 nc 5 6 7 8 out a out b nc in a gnd in b v dd tc4423 tc4424 note 1: duplicate pins must both be connected for proper operation. 2: exposed pad of the dfn package is electrically isolated. tc4423 tc4424 nc out a out b v dd tc4423 tc4424 tc4425 nc out a out b v dd 1 2 3 4 5 6 7 8 16 13 12 11 10 9 nc in a nc gnd gnd nc in b nc nc out a v dd v dd out b out b nc out a 15 14 tc4423 tc4424 tc4425 16-pin soic (wide) nc out a v dd v dd out b out b nc out a out a v dd v dd out b out b nc out a tc4423 tc4424 tc4425 nc tc4425 tc4425 nc out a out b v dd tc4423 tc4424 nc out a out b v dd tc4425 nc out a out b v dd 3a dual high-speed power mosfet drivers
tc4423/tc4424/tc4425 ds21421d-page 2 ? 2004 microchip technology inc. functional block diagram (1) effective input c = 20 pf (each input) tc4423 dual inverting tc4424 dual non-inverting tc4425 one inverting, one non-inverting output input gnd v dd 300 mv 4.7v inverting non-inverting note 1: unused inputs should be grounded. 750 a
? 2004 microchip technology inc. ds21421d-page 3 tc4423/tc4424/tc4425 1.0 electrical characteristics absolute maximum ratings ? supply voltage ................................................................+22v input voltage, in a or in b ................................................ (v dd + 0.3v) to (gnd ? 5v) package power dissipation (t a 70c) dfn ......................................................................... note 2 pdip .......................................................................730 mw soic.......................................................................470 mw ? notice: stresses above those listed under "maximum ratings" may cause permanent damage to the device. this is a stress rating only and functional operation of the device at those or any other conditions above those indicated in the operational sections of this specification is not intended. exposure to maximum rating conditions for extended periods may affect device reliability. dc characteristics electrical specifications: unless otherwise indicated, t a = +25c, with 4.5v v dd 18v. parameters sym min typ max units conditions input logic ? 1 ?, high input voltage v ih 2.4 ? ? v logic ? 0 ?, low input voltage v il ??0.8v input current i in ?1 ? 1 a 0v v in v dd output high output voltage v oh v dd ? 0.025 ? ? v low output voltage v ol ? ? 0.025 v output resistance, high r oh ?2.85 ? i out = 10 ma, v dd = 18v output resistance, low r ol ?3.55 ? i out = 10 ma, v dd = 18v peak output current i pk ?3?a latch-up protection with- stand reverse current i rev ? >1.5 ? a duty cycle 2%, t 300 sec. switching time (note 1) rise time t r ?2335ns figure 4-1 , figure 4-2 , c l = 1800 pf fall time t f ?2535ns figure 4-1 , figure 4-2 , c l = 1800 pf delay time t d1 ?3375ns figure 4-1 , figure 4-2 , c l = 1800 pf delay time t d2 ?3875ns figure 4-1 , figure 4-2 , c l = 1800 pf power supply power supply current i s ? ? 1.5 0.15 2.5 0.25 ma v in = 3v (both inputs) v in = 0v (both inputs) note 1: switching times ensured by design. 2: package power dissipation is dependent on the copper pad area on the pcb.
tc4423/tc4424/tc4425 ds21421d-page 4 ? 2004 microchip technology inc. dc characteristics (over oper ating temperature range) temperature characteristics electrical specifications: unless otherwise indicated, operating temperature range with 4.5v v dd 18v. parameters sym min typ max units conditions input logic ? 1 ?, high input voltage v ih 2.4 ? ? v logic ? 0 ?, low input voltage v il ??0.8v input current i in ?10 ? +10 a 0v v in v dd output high output voltage v oh v dd ? 0.025 ? ? v low output voltage v ol ??0.025v output resistance, high r oh ?3.78 ? i out = 10 ma, v dd = 18v output resistance, low r ol ?4.38 ? i out = 10 ma, v dd = 18v peak output current i pk ?3.0?a latch-up protection withstand reverse current i rev ? >1.5 ? a duty cycle 2%, t 300 sec switching time (note 1) rise time t r ?2860ns figure 4-1 , figure 4-2 , c l = 1800 pf fall time t f ?3260ns figure 4-1 , figure 4-2 , c l = 1800 pf delay time t d1 ? 32 100 ns figure 4-1 , figure 4-2 , c l = 1800 pf delay time t d2 ? 38 100 ns figure 4-1 , figure 4-2 , c l = 1800 pf power supply power supply current i s ? ? 2.0 0.2 3.5 0.3 ma v in = 3v (both inputs) v in = 0v (both inputs) note 1: switching times ensured by design. electrical specifications: unless otherwise noted, all parameters apply with 4.5v v dd 18v. parameters sym min typ max units conditions temperature ranges specified temperature range (c) t a 0?+70c specified temperature range (e) t a ?40 ? +85 c specified temperature range (v) t a ?40 ? +125 c maximum junction temperature t j ??+150c storage temperature range t a ?65 ? +150 c package thermal resistances thermal resistance, 8l-6x5 dfn ja ? 33.2 ? c/w typical four-layer board with vias to ground plane thermal resistance, 8l-pdip ja ? 125 ? c/w thermal resistance, 16l-soic ja ? 155 ? c/w
? 2004 microchip technology inc. ds21421d-page 5 tc4423/tc4424/tc4425 2.0 typical performance curves figure 2-1: rise time vs. supply voltage. figure 2-2: rise time vs. capacitive load. figure 2-3: rise and fall times vs. temperature. figure 2-4: fall time vs. supply voltage. figure 2-5: fall time vs. capacitive load. figure 2-6: propagation delay vs. input amplitude. note: the graphs and tables provided following this note are a statistical summary based on a limited number of samples and are provided for informational purposes only. the performance characteristics listed herein are not tested or guaranteed. in some graphs or tables, the data presented may be outside the specified operating range (e.g., outside specified power supply range) and therefore outside the warranted range. 4681012141618 2200 pf 100 80 60 40 20 0 1000 pf 3300 pf 1500 pf 4700 pf 470 pf t rise (nsec) v dd (v) 100 1000 10,000 5v 10v 15v 100 80 60 40 20 0 t rise (nsec) c load (pf) time (nsec) 32 30 28 26 24 22 20 18 -55 -35 5 25 45 65 85 105 125 -15 t fall t rise t a ( c) t fall t rise c load = 2200 pf 4681012141618 100 80 60 40 20 0 1000 pf 1500 pf 4700 pf 3300 pf 2200 pf 470 pf t fall (nsec) v dd (v) 100 1000 10,000 5v 10v 15v 100 80 60 40 20 0 t fall (nsec) c load (pf) 100 80 60 40 20 delay time (nsec) input (v) 0123456789101112 t d1 t d2 c load = 2200 pf v dd = 10v
tc4423/tc4424/tc4425 ds21421d-page 6 ? 2004 microchip technology inc. typical performance curves (continued) figure 2-7: propagation delay time vs. supply voltage. figure 2-8: quiescent current vs. supply voltage. figure 2-9: output resistance (output high) vs. supply voltage. figure 2-10: propagation delay time vs. temperature. figure 2-11: quiescent current vs. temperature. figure 2-12: output resistance (output low) vs. supply voltage. 50 45 40 35 30 25 20 4 6 8 1012141618 delay time (nsec) v dd (v) c load = 2200 pf t d1 t d2 1 0.1 0.01 4 6 8 10 12 14 16 18 both inputs = 1 both inputs = 0 v dd (v) i quiescent (ma) t a = 25 c 14 12 10 8 6 4 2 4 6 8 10 12 14 16 18 typical @ t a = +25 c worst case @ t j = +150 c v dd (v) r ds(on) ( ? ) 50 45 40 35 30 25 20 delay time (nsec) -55 -35 -15 5 25 45 65 85 105 125 t d2 t d1 c load = 2200 pf t a ( c) -55 -35 -15 5 25 45 65 85 105 125 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 both inputs = 1 both inputs = 0 t a ( c) i quiescent (ma) 14 12 10 8 6 4 2 4 6 8 1012141618 worst case @ t j = +150 c v dd (v) typical @ t a = +25 c r ds(on) ( ? )
? 2004 microchip technology inc. ds21421d-page 7 tc4423/tc4424/tc4425 typical performance curves (continued) note : load on single output only figure 2-13: supply current vs. capacitive load. figure 2-14: supply current vs. capacitive load. figure 2-15: supply current vs. capacitive load. figure 2-16: supply current vs. frequency. figure 2-17: supply current vs. frequency. figure 2-18: supply current vs. frequency. 100 1000 10,000 60 50 40 30 20 10 0 355 khz 200 khz 35.5 khz 634 khz c load (pf) 112.5 khz 20 khz 63.4 khz v dd = 18v i supply (ma) 100 1000 10,000 2 mhz 1.125 mhz 634 khz 355 khz 200 khz 112.5 khz 63.4 khz 20 khz 90 80 70 60 50 40 30 20 10 0 i supply (ma) c load (pf) v dd = 12v 100 1000 10,000 634 khz 355 khz 112.5 khz 20 khz 2 mhz 1.125 mhz 3.55 mhz 120 100 80 60 40 20 0 c load (pf) i supply (ma) v dd = 6v 10,000 pf frequency (khz) 60 50 40 30 20 10 0 10 100 100 0 3300 pf 100 pf 1000 pf i supply (ma) v dd = 18v 10,000 pf 10 100 1000 fre q uenc y ( khz ) 90 80 70 60 50 40 30 20 10 0 100 pf 3300 pf 1000 pf i supply (ma) v dd = 12v 10 100 1000 frequency (khz) 1000 pf 4700 pf 100 pf 120 100 80 60 40 20 0 10,000 pf 2200 pf i supply (ma) v dd = 6v
tc4423/tc4424/tc4425 ds21421d-page 8 ? 2004 microchip technology inc. typical performance curves (continued) figure 2-19: tc4423 crossover energy. 10 -8 8 10 -7 a  sec 024681012141618 6 4 2 8 6 4 2 10 -9 v in (v) note: the values on this graph represent the loss seen by both drivers in a package during one complete cycle. for a single driver, divide the stated values by 2. for a single transition of a single driver, divide the stated value by 4.
? 2004 microchip technology inc. ds21421d-page 9 tc4423/tc4424/tc4425 3.0 pin descriptions the descriptions of the pins are listed in table 3-1. table 3-1: pin function table (1) 3.1 inputs a and b inputs a and b are ttl/cmos compatible inputs that control outputs a and b, respectively. these inputs have 300 mv of hysteresis between the high and low input levels, allowing them to be driven from slow rising and falling signals, and to provide noise immunity. 3.2 outputs a and b outputs a and b are cmos push-pull outputs that are capable of sourcing and sinking 3a peaks of current (v dd = 18v). the low output impedance ensures the gate of the external mosfet will stay in the intended state even during large transients. these outputs also have a reverse current latch-up rating of 1.5a. 3.3 supply input (v dd ) v dd is the bias supply input for the mosfet driver and has a voltage range of 4.5v to 18v. this input must be decoupled to ground with a local ceramic capacitor. this bypass capacitor provides a localized low- impedance path for the peak currents that are to be provided to the load. 3.4 ground (gnd) ground is the device return pin. the ground pin(s) should have a low-impedance connection to the bias supply source return. high peak currents will flow out the ground pin(s) when the capacitive load is being discharged. 3.5 exposed metal pad the exposed metal pad of the 6x5 dfn package is not internally connected to any potential. therefore, this pad can be connected to a ground plane or other cop- per plane on a printed circuit board to aid in heat removal from the package. 8-pin pdip 8-pin dfn 16-pin soic (wide) symbol description 1 1 1 nc no connection 2 2 2 in a input a ? ? 3 nc no connection 3 3 4 gnd ground ? ? 5 gnd ground ? ? 6 nc no connection 4 4 7 in b input b ? ? 8 nc no connection ? ? 9 nc no connection 5 5 10 out b output b ??11out boutput b 6612v dd supply input ??13v dd supply input 7 7 14 out a output a ? ? 15 out a output a 8 8 16 nc no connection ? pad ? nc exposed metal pad note 1: duplicate pins must be connected for proper operation.
tc4423/tc4424/tc4425 ds21421d-page 10 ? 2004 microchip technology inc. 4.0 applications information figure 4-1: inverting driver switching time. figure 4-2: non-inverting driver switching time. 0.1 f +5v 10% 90% 10% 90% 10% 90% 18v 1f wima mks-2 0v 0v tc4423 (1/2 tc4425) 1 2 c l = 1800 pf input input output t d1 t f t d2 input: 100 khz, square wave, output t r v dd = 18v t rise = t fall 10 ns ceramic 90% input t d1 t f t d2 output t r 10% 10% 10% +5v 18v 0v 0v 90% 90% input: 100 khz, square wave, t rise = t fall 10 ns 0.1 f 1f wima mks-2 tc4424 (1/2 tc4425) 1 2 c l = 1800 pf input output v dd = 18v ceramic
? 2004 microchip technology inc. ds21421d-page 11 tc4423/tc4424/tc4425 5.0 packaging information 5.1 package marking information xxxxxxxx xxxxxnnn yyww 8-lead pdip (300 mil) example: legend: xx...x customer specific information* yy year code (last 2 digits of calendar year) ww week code (week of january 1 is week ?01?) nnn alphanumeric traceability code note : in the event the full microchip part number cannot be marked on one line, it will be carried over to the next line thus limiting the number of available characters for customer specific information. * standard marking consists of microchip part number, year code, week code, traceability code (facility code, mask rev#, and assembly code). for marking beyond this, certain price adders apply. please check with your microchip sales office. tc4423 cpa256 0420 16-lead soic (300 mil) example: xxxxxxxxxxx xxxxxxxxxxx yywwnnn xxxxxxxxxxx 0420256 tc4423coe 8-lead dfn example : xxxxxxx xxxxxxx xxyyww nnn tc4423 emf 0420 256
tc4423/tc4424/tc4425 ds21421d-page 12 ? 2004 microchip technology inc. 8-lead plastic dual flat no lead package (mf) 6x5 mm body (dfn-s) ? saw singulated
? 2004 microchip technology inc. ds21421d-page 13 tc4423/tc4424/tc4425 8-lead plastic dual in-line (p) ? 300 mil (pdip) b1 b a1 a l a2 p e eb c e1 n d 1 2 units inches* millimeters dimension limits min nom max min nom max number of pins n 88 pitch p .100 2.54 top to seating plane a .140 .155 .170 3.56 3.94 4.32 molded package thickness a2 .115 .130 .145 2.92 3.30 3.68 base to seating plane a1 .015 0.38 shoulder to shoulder width e .300 .313 .325 7.62 7.94 8.26 molded package width e1 .240 .250 .260 6.10 6.35 6.60 overall length d .360 .373 .385 9.14 9.46 9.78 tip to seating plane l .125 .130 .135 3.18 3.30 3.43 lead thickness c .008 .012 .015 0.20 0.29 0.38 upper lead width b1 .045 .058 .070 1.14 1.46 1.78 lower lead width b .014 .018 .022 0.36 0.46 0.56 overall row spacing eb .310 .370 .430 7.87 9.40 10.92 mold draft angle top 51015 51015 mold draft angle bottom 51015 51015 * controlling parameter notes: dimensions d and e1 do not include mold flash or protrusions. mold flash or protrusions shall not exceed jedec equivalent: ms-001 drawing no. c04-018 .010? (0.254mm) per side. significant characteristic
tc4423/tc4424/tc4425 ds21421d-page 14 ? 2004 microchip technology inc. 16-lead plastic small outline (so) ? wide, 300 mil (soic) foot angle 048048 15 12 0 15 12 0 mold draft angle bottom 15 12 0 15 12 0 mold draft angle top 0.51 0.42 0.36 .020 .017 .014 b lead width 0.33 0.28 0.23 .013 .011 .009 c lead thickness 1.27 0.84 0.41 .050 .033 .016 l foot length 0.74 0.50 0.25 .029 .020 .010 h chamfer distance 10.49 10.30 10.10 .413 .406 .398 d overall length 7.59 7.49 7.39 .299 .295 .291 e1 molded package width 10.67 10.34 10.01 .420 .407 .394 e overall width 0.30 0.20 0.10 .012 .008 .004 a1 standoff 2.39 2.31 2.24 .094 .091 .088 a2 molded package thickness 2.64 2.50 2.36 .104 .099 .093 a overall height 1.27 .050 p pitch 16 16 n number of pins max nom min max nom min dimension limits millimeters inches* units l c h 45 1 2 d p n b e1 e a2 a1 a * controlling parameter notes: dimensions d and e1 do not include mold flash or protrusions. mold flash or protrusions shall not exceed .010? (0.254mm) per side. jedec equivalent: ms-013 drawing no. c04-102 significant characteristic
? 2004 microchip technology inc. ds21421d-page 15 tc4423/tc4424/tc4425 product identification system to order or obtain information, e. g., on pricing or delivery, refer to the factory or the listed sales office . sales and support device: tc4423: 3a dual mosfet driver, inverting tc4424: 3a dual mosfet driver, non-inverting tc4425: 3a dual mosfet driver, complementary temperature range: c = 0c to +70c (pdip & soic only) e = -40c to +85c v = -40c to +125c package: mf = dual, flat, no-lead (6x5 mm body), 8-lead mf713 = dual, flat, no-lead (6x5 mm body), 8-lead (tape and reel) oe = soic (wide), 16-pin oe713 = soic (wide), 16-pin (tape and reel) pa = plastic dip, (300 mil body), 8-lead pb free: g = lead-free device * = blank * available on selected package s. contact your local sales representative for availability. examples: a) tc4423coe: 3a dual inverting mosfet driver, 0c to +70c, 16ld soic package. b) tc4423cpa: 3a dual inverting mosfet driver, 0c to +70c, 8ld pdip package . c) tc4423vmf: 3a dual inverting mosfet driver, -40c to +125c, 8ld dfn package . a) tc4424coe713: 3a dual non-inverting, mosfet driver, 0c to +70c, 16ld soic package, tape and reel. b) tc4424epa: 3a dual non-inverting, mosfet driver, -40c to +85c, 8ld pdip package. a) tc4425eoe: 3a dual complementary, mosfet driver, -40c to +85c, 16ld soic package . b) tc4425cpa: 3a dual complementary, mosfet driver, 0c to +70c, pdip package . part no. x xx package temperature range device xxx tape & reel x pb free data sheets products supported by a preliminary data sheet may have an errata sheet describing minor operational differences and recommended workarounds. to determine if an errata sheet exists for a particular device, please contact one of the following: 1. your local microchip sales office 2. the microchip corporate literature center u.s. fax: (480) 792-7277 3. the microchip worldwide site (www.microchip.com) please specify which device, revision of silicon and data sheet (include literature #) you are using. customer notification system register on our web site (www.microchip.com/cn) to receive the most current information on our products.
tc4423/tc4424/tc4425 ds21421d-page 16 ? 2004 microchip technology inc. notes:
? 2004 microchip technology inc. ds21421d-page 17 information contained in this publication regarding device applications and the like is intended through suggestion only and may be superseded by updates. it is your responsibility to ensure that your application m eets with your specifications. no representation or warranty is given and no liability is assumed by microchip technol ogy incorporated with respect to the accuracy or use of such information, or infringement of patents or other intellectual property rights arising from such use or otherwise. use of micr ochip?s products as critical components in life support syst ems is not authorized except with express written approval by microchip. no licenses are conveyed, implicitly or ot herwise, under any intellectual property rights. trademarks the microchip name and logo, the microchip logo, accuron, dspic, k ee l oq , micro id , mplab, pic, picmicro, picstart, pro mate, powersmart, rfpic, and smartshunt are registered trademarks of microchip technology incorporated in the u.s.a. and other countries. amplab, filterlab, mxdev, mxlab, picmaster, seeval, smartsensor and the embedded control solutions company are registered trademarks of microchip technology incorporated in the u.s.a. analog-for-the-digital age, app lication maestro, dspicdem, dspicdem.net, dspicworks, ecan, economonitor, fansense, flexrom, fuzzylab, in-circuit serial programming, icsp, icepic, migratable memory, mpasm, mplib, mplink, mpsim, pickit, picdem, picdem.net, piclab, pictail, powercal, powerinfo, powermate, powertool, rflab, rfpicdem, select mode, smart serial, smarttel and total endurance ar e trademarks of microchip technology incorporated in the u.s.a. and other countries. sqtp is a service mark of mi crochip technology incorporated in the u.s.a. all other trademarks mentioned herein are property of their respective companies. ? 2004, microchip technology incorporated, printed in the u.s.a., all rights reserved. printed on recycled paper. note the following details of the code protection feature on microchip devices:  microchip products meet the specification cont ained in their particular microchip data sheet.  microchip believes that its family of products is one of the most secure families of its kind on the market today, when used i n the intended manner and under normal conditions.  there are dishonest and possibly illegal methods used to breach the code protection feature. all of these methods, to our knowledge, require using the microchip produc ts in a manner outside the operating specif ications contained in microchip?s data sheets. most likely, the person doing so is engaged in theft of intellectual property.  microchip is willing to work with the customer who is concerned about the integrity of their code.  neither microchip nor any other semiconduc tor manufacturer can guarantee the security of their code. code protection does not mean that we are guaranteeing the product as ?unbreakable.? code protection is constantly evolving. we at microchip are co mmitted to continuously improvin g the code protection features of our products. attempts to break microchip?s code protection feature may be a violation of the digital millennium copyright act. if such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that act. microchip received iso/ts-16949:2002 quality system certification for its worldwide headquarters, design and wafer fabrication facilities in chandler and tempe, arizona and mountain view, california in october 2003. the company?s quality system processes and procedures are for its picmicro ? 8-bit mcus, k ee l oq ? code hopping devices, serial eeproms, microperipherals, nonvolatile memory and analog products. in addition, microchip?s quality system for the design and manufacture of development systems is iso 9001:2000 certified.
ds21421d-page 18 ? 2004 microchip technology inc. americas corporate office 2355 west chandler blvd. chandler, az 85224-6199 tel: 480-792-7200 fax: 480-792-7277 technical support: 480-792-7627 web address: www.microchip.com atlanta alpharetta, ga tel: 770-640-0034 fax: 770-640-0307 boston westford, ma tel: 978-692-3848 fax: 978-692-3821 chicago itasca, il tel: 630-285-0071 fax: 630-285-0075 dallas addison, tx tel: 972-818-7423 fax: 972-818-2924 detroit farmington hills, mi tel: 248-538-2250 fax: 248-538-2260 kokomo kokomo, in tel: 765-864-8360 fax: 765-864-8387 los angeles mission viejo, ca tel: 949-462-9523 fax: 949-462-9608 san jose mountain view, ca tel: 650-215-1444 fax: 650-961-0286 toronto mississauga, ontario, canada tel: 905-673-0699 fax: 905-673-6509 asia/pacific australia - sydney tel: 61-2-9868-6733 fax: 61-2-9868-6755 china - beijing tel: 86-10-8528-2100 fax: 86-10-8528-2104 china - chengdu tel: 86-28-8676-6200 fax: 86-28-8676-6599 china - fuzhou tel: 86-591-750-3506 fax: 86-591-750-3521 china - hong kong sar tel: 852-2401-1200 fax: 852-2401-3431 china - shanghai tel: 86-21-6275-5700 fax: 86-21-6275-5060 china - shenzhen tel: 86-755-8290-1380 fax: 86-755-8295-1393 china - shunde tel: 86-757-2839-5507 fax: 86-757-2839-5571 china - qingdao tel: 86-532-502-7355 fax: 86-532-502-7205 asia/pacific india - bangalore tel: 91-80-2229-0061 fax: 91-80-2229-0062 india - new delhi tel: 91-11-5160-8632 fax: 91-11-5160-8632 japan - kanagawa tel: 81-45-471- 6166 fax: 81-45-471-6122 korea - seoul tel: 82-2-554-7200 fax: 82-2-558-5932 or 82-2-558-5934 singapore tel: 65-6334-8870 fax: 65-6334-8850 taiwan - kaohsiung tel: 886-7-536-4816 fax: 886-7-536-4817 taiwan - taipei tel: 886-2-2500-6610 fax: 886-2-2508-0102 taiwan - hsinchu tel: 886-3-572-9526 fax: 886-3-572-6459 europe austria - weis tel: 43-7242-2244-399 fax: 43-7242-2244-393 denmark - ballerup tel: 45-4420-9895 fax: 45-4420-9910 france - massy tel: 33-1-69-53-63-20 fax: 33-1-69-30-90-79 germany - ismaning tel: 49-89-627-144-0 fax: 49-89-627-144-44 italy - milan tel: 39-0331-742611 fax: 39-0331-466781 netherlands - drunen tel: 31-416-690399 fax: 31-416-690340 england - berkshire tel: 44-118-921-5869 fax: 44-118-921-5820 w orldwide s ales and s ervice 08/24/04


▲Up To Search▲   

 
Price & Availability of TC4424EMF713

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X