mae00019cem MN102H90M type MN102H90M internal rom type mask rom rom (byte) 384k ram (byte) 20k package (lead-free) qfp160-p-2828f minimum instruction execution time 83 ns (at 3.0 v to 3.6 v, 12 mhz) ? interrupts external ( 6 lines) internal (35 lines) : timer 10 , a/d 1, osd 3, serial 6, i2c 3, caption 4, remote control 1 , address coincidence 4, rtc 3 ? timer counter 8-bit timer 10 watchdog timer : 16-bit 1 ? serial interface i2c 3 : for multimaster mode, bus line (output) has 4 systems sync serial / i2c (master) / uart 3 ? caption / teletext decoder built-in sync separator 2 ? i/o pins i/o 111 common use ? a/d converter 8-bit 12 -ch. (with s/h) ? d/a converter 8-bit 4-ch. (general use or analog r, g, b, output) ? pwm 8-bit 4 -ch. ? special ports remote control reception, digital osd output ? crtc 3 -layer display (graphics, characters, sprites) ? notes remote control input discriminant circuit, real time clock, hcounter built-in ? development tools in-circuit emulator px-ice 102h90-qfp160-p-2828f
mae00019cem MN102H90M ? pin assignment tstmd1 p83, a20 p66, a07 p65, a06 p64, a05 p63, a04 p62, a03 p61, a02 p60, a01 test vdd rt cx i rt cx o vss p45, hi0 p44, hi1 p43, vi0 p42, vi1 p16, tm3io p15, tm2io p14, tm1io p13, tm0io pc3, sda0b * pc2, scl0b * vss p41, hcclk0 p40, hcclk1 vdd p37, b04 p36, b03 p35, b02 p34, b01 p33, b00 p32, g05 p31, g04 p30, g03 p27, g02 p26, g01 p25, g00 vdd 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 clh vrefhs0 cvbs0 av dd 1 cll vrefhs1 cvbs1 av ss iref vref com p darout , dacout 0 dagout , dacout 1 dabout , dacout 2 daalout , dacout 3 av dd 2 av ss p00, sysclk p01, hout p02, al0 p03, al1 p04, al2 p05, al3 p06, vclkout pc0, scl0a * pc1, sda0a * p07, hsync p10, ym p1 1, ys p12, vsync, irq1 vss osdxo osdxi vdd p20, r00 p21, r01 p22, r02 p23, r03 p24, r04 vss 80 79 78 77 76 75 74 73 72 71 70 69 68 67 66 65 64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 47 46 45 44 43 42 41 120 11 9 11 8 11 7 11 6 11 5 11 4 11 3 11 2 111 11 0 109 108 107 106 105 104 103 102 101 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 cpumd0 cpumd1 cpumd2 pc4, sda1 * pc5, scl1 * pd0, wdout , sbt2 pd1, st op , sbi2 pd2, sbo2 p53, pwm0, cs0 p54, pwm1, cs1 p55, pwm2, cs2 p56, pwm3, cs3 p90, sbt0 p91, sbi0 p92, sbo0 p93, sbt1 p94, sbi1 p95, sbo1 p57, rmin, irq0 vdd osc1 osc2 vss pe0, adin0 pe1, adin1 pe2, adin2 pe3, adin3 pe4, adin4 pe5, adin5 pe6, adin6 pe7, adin7 pf0, adin8, irq2 pf1, adin9, irq3 pf2, adin10, irq4 pf3, adin1 1, irq5 pc6, sda2 * pc7, scl2 * av ss av dd 1 pll tst 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 tstmd0 p52, we p51, oe vdd p50, /rst vss pb7, d15 pb6, d14 pb5, d13 pb4, d12 pb3, d1 1 pb2, d10 pb1, d09 pb0, d08 pa 7, d07 pa 6, d06 pa 5, d05 pa 4, d04 vss vdd pa 3, d03 pa 2, d02 pa 1, d01 pa 0, d00 p82, a19 p81, a18 p80, a17 p77, a16 p76, a15 p75, a14 p74, a13 p73, a12 vdd vss p72, a1 1 p71, a10 p70, a09 p67, a08 p84, a21 oscmd0 MN102H90M qfp160-p-2828f note) * : 5 v dielectric n-ch. open drain output pin
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. industrial co., ltd.
|
