we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications.all operating parameters must be validated for each customer application by the c ustomer. led - lamp 16.11.2007 rev. 03 radiation yellow-green note: special packages with standoff available on request maximum ratings t amb = 25c, unless otherwise specified symbol value unit i f 50 ma i fm 100 ma p d 128 mw t amb -20 to +80 c t stg -30 to +100 c junction temperature t j 80 c t sd 260 c optical and electrical characteristics t amb = 25c, unless otherwise specified parameter test conditions symbol min typ max unit forward voltage i f = 20 ma v f 2.2 2.7 v forward voltage* i f = 40 ma v f 2.4 3.0 v reverse voltage i r = 10 a v f 5v radiant power i f = 20 ma e 0,12 0,17 mw radiant intensity i f = 20 ma e 0,55 0,70 mw/sr luminous intensity i f = 20 ma v 270 350 mcd luminous intensity* i f = 40 ma v 700 mcd peak wavelength i f = 20 ma p 560 572 580 nm spectral bandwidth at 50% i f = 20 ma ? 0.5 30 nm viewing angle i f = 20 ma ? 18 deg. switching time i f = 20 ma t r, t f 1 s note: all measurements carried out on epigap equipment storage temperature range *measured after 30s current flow soldering temperature test onditions power dissipation operating temperature range standard description t 5 s, 3 mm from case parameter forward current (dc) peak forward current applications yellow-green led in standard 5 mm package, with lens for optimal beam focusing, housing without standoff leads (t p 50 s, t p /t = 1/2) ELD-572-524 case 5 mm plastic lens technology gap/gap illumination, safety equipment, automation, optical sensors type 8,6 0,3 1,0 min 1 0,2 ?5,9 0,2 anode 2,54 0,5 ?5,0 0,3 25,4 min epigap optoelektronik gmbh, d-12555 berlin, k?penicker str.325 b, haus 201 tel.: +49-30-6576 2543, fax : +49-30-6576 2545 1 of 2
we reserve the right to make changes to improve technical design and may do so without further notice. parameters can vary in different applications.all operating parameters must be validated for each customer application by the c ustomer. led - lamp 16.11.2007 rev. 03 ELD-572-524 epigap optoelektronik gmbh, d-12555 berlin, k?penicker str.325 b, haus 201 tel.: +49-30-6576 2543, fax : +49-30-6576 2545 2 of 2
|