smd wire-wound chip inductors ctparts.com manufacturer of inductors, chokes, coils, beads, transformers & toroids 800-684-5322 inside us 949-453-1811 outside us copyright ?2003 by ct magnetics, dba central technologies. all rights reserved. ct magnetics reserves the right to make improvements or change specifications without notice central te c hnologies 12.14.01 physical dimensions pad layout size a b c d e f max. max. max. mm 2.55 2.38 2.1 2 0.5 1.43 inches 0.1 0.09 0.08 0.08 0.02 0.06 specifications please specify tolerance code when ordering. ct1008hs-330_ g = ?%, j = ?%, k = ?0%, m = ?0% * m also (all other values are g, j, k only) l test q q test srf dcr rated part inductance freq. fact. freq. min. max. dc number (nh) (mhz) min. (mhz) (mhz) ( ) (ma) ct1008hs-100_* 10 50 60 500 4100 .05 1000 ct1008hs-120_* 12 50 60 500 3300 .09 1000 ct1008hs-150_* 15 50 60 500 2500 .13 1000 ct1008hs-180_* 18 50 60 350 2500 .08 1000 ct1008hs-220_* 22 50 60 350 2400 .13 1000 ct1008hs-270_ 27 50 65 350 1600 .12 1000 ct1008hs-330_* 33 50 65 350 1600 .14 1000 ct1008hs-390_* 39 50 65 350 1500 .15 1000 ct1008hs-470_ 47 50 68 350 1500 .16 1000 ct1008hs-560_ 56 50 68 350 1300 .18 1000 ct1008hs-680_ 68 50 68 350 1300 .21 1000 ct1008hs-820_ 82 50 68 350 1200 .22 1000 ct1008hs-101_ 100 25 62 350 1000 .35 750 ct1008hs-121_ 120 25 62 350 950 .38 750 ct1008hs-151_ 150 25 46 100 850 .40 750 ct1008hs-181_ 180 25 48 100 750 .42 750 ct1008hs-221_ 220 25 48 100 700 .54 600 ct1008hs-271_ 270 25 48 100 600 .50 600 ct1008hs-331_ 330 25 48 100 570 .70 550 ct1008hs-391_ 390 25 48 100 500 .72 550 ct1008hs-471_ 470 25 48 100 450 .95 520 ct1008hs-561_ 560 25 48 100 415 1.2 420 ct1008hs-621_ 620 25 48 100 375 1.3 320 ct1008hs-681_ 680 25 48 100 375 1.4 400 ct1008hs-751_ 750 25 48 100 360 1.5 370 ct1008hs-821_ 820 25 48 100 350 1.5 400 ct1008hs-911_ 910 25 48 50 330 2.0 350 ct1008hs-102_ 1000 25 44 50 310 2.1 340 ct1008hs series from 10 nh to 1,000 nh not shown at actual size. characteristics description: smd ceramic core wire-wound chip inductor applications: lc resonant circuits such as oscillator and signal generators, impedance matching, circuit isolation, rf filters, disk drives and computer peripherals, audio and video equipment, tv, radio and telecommunication equipment operating temperature: -40c to +125c inductance tolerance: 2%, 5%, 10%, 20% testing: inductance and q are tested on an hp4286a or hp4287a at specified frequency packaging: tape & reel marking: reels are marked with inductance code and tolerance coated: epoxy resin on top of the part to permanently set the coil miscellaneous: parts are also available with a clear plastic cap. other values available additional information: additional electrical & physical information available upon request samples available. see website for ordering information.
|