plug receptacle series wt = 1-row, straight-plug wt = 1-row, straight, receptacle wt = 1-row, right-angle, plug wt = 1-row, right-angle, receptacle number of contacts 3 through 22 3 through 22 type of contacts pc = pin, straight, solder cup sac = socket, straight, solder cup pd7 = pin, straight, dip solder, .109 sad7 = socket, straight, dip solder, .109 pd9 = pin, straight, dip solder, .140 sad9 = socket, straight, dip solder, .140 pd11 = pin, straight, dip solder, .172 sad11 = socket, straight, dip solder, .172 pf3 = pin, straight, flex-circuit, .050 sad15 = socket, straight, dip solder, .234 pf6 = pin, straight, flex-circuit, .093 saf3 = socket, straight, flex-circuit, .050 prd4 = pin, right-angle, dip solder, .063 saf6 = socket, straight, flex-circuit, .093 prd7 = pin, right-angle, dip solder, .109 sap = sock et, straight, pin termination, .150, connector saver prd8 = pin, right-angle, dip solder, .125 sar4 = socket, right-angle, dip solder, .062 pw40 = pin, straight, wire wrap, .625 sar7 = socket, right-angle, dip solder, .109 sar9 = socket, right-angle, dip solder, .140 sarc = socket, right-angle, solder cup saw40 = socket, straight, wire wrap, .625 type of hardware no hardware for this series. omit any hardware code letters. options ? the thin outboard barriers are often removed at the factory due to their fragile nature. ? option codes: add to the end of the part number. example: wt10pc 443 -1 call factory for additional codes. -443: polarized pin installed in contact position noted by dash number. see polarization under next tab. -444: contact position noted by dash number is left open (to mate with -443). see polarization under next tab. -b82: termination face sealed against conformal coating. -cd: cross drilled connectors for hold down screws. see page w-8. -d01: pre-tin contact terminations. (solder cup, wire wrap and flex circuit contacts are excluded.) -d54: combine b82 and d01 special codes. -g69: solder cups are fixed in an outward orientation, otherwise contacts can rotate. airborn, inc. ? 4321 airborn drive ? addison, tx 75001-0519 ph: (972)931-3200 fax: (972)931-9305 e-mail: info@airborn.com the interconnect solution source w series connectors w-6 9916 right-angle plug: wt 8 prd7 straight plug: wt 8 pd9 receptacle: wt 8 sac 1 1 ? row connectors pc card to cable to board: cable to cable examples: wt-wt
wt-wt dimensions airborn, inc. ? 4321 airborn drive ? addison, tx 75001-0519 ph: (972)931-3200 fax: (972)931-9305 e-mail: info@airborn.com w series connectors 9916 w-7 the interconnect solution source number of ab contacts 4 .396 .300 6 .596 .500 8 .796 .700 10 .996 .900 12 1.196 1.100 14 1.396 1.300 16 1.596 1.500 18 1.796 1.700 20 1.996 1.900
airborn, inc. ? 4321 airborn drive ? addison, tx 75001-0519 ph: (972)931-3200 fax: (972)931-9305 e-mail: info@airborn.com the interconnect solution source w series connectors w-8 wt code chart wt dimensions series size for contact type no of a b series size for contact type contacts dim dim 6 pc pin, solder cup 2 .596 .100 6 sac socket, solder cup closed entry pd9 pin, dip solder .140 extension 8 pd11 pin, dip solder 4 .796 .300 8 sad9 socket, dip solder .172 extension closed entry, .140 ext. wt 10 prd4 pin, right-angle 6 .996 .500 wt 10 sad11 socket, dip solder dip solder, .063 ext. closed entry, .172 ext. 12 prd7 pin, right-angle, 8 1.196 .700 12 sar7 socket, right-angle dip solder, .109 ext. closed entry, .109 ext. 14 prd8 pin, right-angle, 10 1.396 .900 14 dip solder, .125 ext. 16 12 1.596 1.100 16 18 14 1.796 1.300 18 20 16 1.996 1.500 20 0018
|
