new product ss3p3l & ss3p4l vishay general semiconductor document number: 88986 revision: 26-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 high current density surface mount schottky barrier rectifiers features ? very low profile - typical height of 1.1 mm ? ideal for automated placement ? low forward voltage drop, low power losses ? high efficiency ? low thermal resistance ? ?green? molding compound (gmc) ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec mechanical data case: to-277a (smpc) molding compound meets ul 94v-0 flammability rating. ?g? vs. ?e? suffix defines molding as none green, ?e?, or green molding compound (gmc) ?g?. ?g? is defined as halogen-free (hf) and antimony-free molding compound. terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 and g3 suffix for consumer grade, meets jesd 201 class 1a whisker test, he3 and hg3 suffix for high reliability grade (aec q101 qualified), meets jesd 201 class 2 whisker test typical applications for use in low voltage high frequency inverters, freewheeling, dc-to-dc converters, and polarity protection applications. note: ? there is no industry standard for definition of hf, or gmc for components. primary characteristics i f(av) 3 a v rrm 30 v, 40 v i fsm 150 a e as 20 mj v f at i f = 3.0 a 0.335 v t j max. 150 c to-277a (smpc) anode 1 anode 2 cathode k k 2 1 esmp tm series maximum ratings (t a = 25 c unless otherwise noted) parameter symbol ss3p3l ss3p4l unit device marking code s33 s34 maximum repetitive peak reverse voltage v rrm 30 40 v maximum average forward rectified current (fig. 1) i f(av) 3.0 a peak forward surge current 10 ms single half sine-wave superimposed on rated load i fsm 150 a non-repetitive avalanche energy at i as = 2 a, t j = 25 c e as 20 mj operating junction and storage temperature range t j, t stg - 55 to + 150 c
new product ss3p3l & ss3p4l vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88986 revision: 26-may-08 2 notes: (1) pulse test: 300 s pulse width, 1 % duty cycle (2) pulse test: pulse width 40 ms note: (1) units mounted on recommended p.c.b. 1 oz. pad layout note: (1) automotive grade aec q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) parameter test conditions symbol typ. max. unit maximum instantaneous forward voltage (1) i f = 1.5 a i f = 3.0 a t a = 25 c v f 0.384 0.427 - 0.47 v i f = 1.5 a i f = 3.0 a t a = 125 c 0.268 0.335 - 0.38 maximum reverse current (2) rated v r t a = 25 c t a = 125 c i r 61.8 26.7 250 40 a ma typical junction capacitance 4.0 v, 1 mhz c j 280 - pf thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol ss3p3l ss3p4l unit typical thermal resistance r ja (1) r jl 60 3 c/w ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode ss3p4l-e3/86a 0.10 86a 1500 7" diameter plastic tape and reel ss3p4l-e3/87a 0.10 87a 6500 13" diameter plastic tape and reel ss3p4lhe3/86a (1) 0.10 86a 1500 7" diameter plastic tape and reel ss3p4lhe3/87a (1) 0.10 87a 6500 13" diameter plastic tape and reel ss3p4l-g3/86a 0.10 86a 1500 7" diameter plastic tape and reel ss3p4l-g3/87a 0.10 87a 6500 13" diameter plastic tape and reel ss3p4lhg3/86a (1) 0.10 86a 1500 7" diameter plastic tape and reel ss3p4lhg3/87a (1) 0.10 87a 6500 13" diameter plastic tape and reel
new product ss3p3l & ss3p4l vishay general semiconductor document number: 88986 revision: 26-may-08 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. forward current derating curve figure 2. forward power loss characteristics figure 3. typical instantaneous forward characteristics 3.0 2.5 2.0 1.5 1.0 0.5 0 8 0 90 100 110 120 130 140 150 resisti v e or ind u cti v e load a v erage for w ard rectified c u rrent (a) lead temperat u re (c) t l meas u red at the cathode band terminal 0 0.3 0.6 0.9 1.2 1.5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 d = 0.1 d = 0.2 d = 0.3 d = 0.5 d = 0. 8 d = 1.0 a v erage for w ard c u rrent (a) a v erage po w er loss ( w ) d = t p /t t p t 0.01 0.1 1 10 100 0 0.2 0.4 0.6 0. 8 1.0 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t a = 150 c t a = 125 c t a = 25 c figure 4. typical reverse leakage characteristics figure 5. typical junction capacitance figure 6. typical transient thermal impedance 0.001 0.01 0.1 1 10 100 1000 10 30 40 60 8 0 20 50 70 90 100 percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse c u rrent (ma) t a = 150 c t a = 125 c t a = 25 c 100 1000 0.1 1 10 100 t j = 25 c f = 1.0 mhz v sig = 50 m v p-p re v erse v oltage ( v ) j u nction capaci tance (pf) j u nction to am b ient 0.01 0.1 1 10 100 1 10 100 t - p u lse d u ration (s) transient thermal impedance (c/ w )
new product ss3p3l & ss3p4l vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88986 revision: 26-may-08 4 package outline dimensions in inches (millimeters) conform to jedec to-277a 0.016 (0.40) 0.006 (0.15) 0.047 (1.20) 0.039 (1.00) 0.1 8 7 (4.75) 0.175 (4.45) 0.262 (6.65) 0.250 (6.35) 0.242 (6.15) 0.23 8 (6.05) 0.171 (4.35) 0.167 (4.25) k 21 0.026 (0.65) n om. to-277a (smpc) 0.146 (3.70) 0.134 (3.40) 0.0 8 7 (2.20) 0.075 (1.90) 0.1 8 9 (4. 8 0) 0.173 (4.40) 0.049 (1.24) 0.037 (0.94) 0.053 (1.35) 0.041 (1.05) 0.030 (0.75) n om. 0.0 8 4 (2.13) n om. 0.155 (3.94) n om. mountin g pad layout 0.26 8 (6. 8 0) 0.1 8 6 (4.72) mi n . 0.050 (1.27) mi n . 0.041 (1.04) 0.055 (1.40) mi n . 0.1 8 9 (4. 8 0) mi n .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
