1 new connectors for low profile power supply rp34l series receptacle installed height mated size mating size features 1. low profile: these receptacles are designed with their installation heights to be shorter than those of conventional rp34 series, such as 6.1mm (for 2-core type) and 5mm (for 3-core type). (see fig.-1.) 2. space saving: both 2 and 3 position receptacles are miniaturized to 7mm in depth, resulting in a small board mounting area.please refer fig.-2 and fig.-3. 3. with snap-lock mechanism: audible click when connector is fully mated. 4. tight fit: designed to fit snugly in all three directions. 5. sequence structure: the 3 contact type has sequenced mating so that one pin makes contact as a ground terminal before the other contacts engage. 6. no mismating two polarized keys prevent any insertion error. 7. ease of mating an arrow on the top of the plug shows the proper direction for insertion. applications notebook pcs, portable remote terminals, av equipment, etc. fig.- ? existing rp34 rp34l-5pa-2sc( ???? ) & rp34l-5r-2pd this 2 contact plug is an over-molded (i.e., cable-integrated form) type. recommended cable diameter is ? 3.5mm. rp34l-5p-3sc & rp34l-5r-3pd this 3-contact plug is a fabricated type. recommended cable diameter is ? 4mm. fig.- ? fig.- ? new 99.4 rp34l (3-contact type) (2-contact type)
2 should be measured at dc 1a. should be measured at dc 100v. ac 150v for 1 minute 10 ~ 55hz, one-sided amplitude 0.75mm, 3 directions for 2hours, respectively -55 ? for 30 min. / normal temp. for 10 ~ 15 min. / +85 ? for 30 min. / normal temp. for 10 ~ 15 min. 5 cycles for 48 consecutive hours in 5% salt water 5,000 time product specifications material quality ratings rated current rated voltage 5a ac30v,dc42a available temp. range storage temp. range -25 ?~ +85 ? -10 ?~ +60 ? description 5.temperature cycle 6.corrosion resistance 7. duration against consecutive plugging/unplugging. specifications 30m ? or less 1000m ? or more no flashover/dielectric4.vibration breakdown no instantaneous electric disconnection of 10 s or more insulation resistance:100m ? or more contact resistance:60m ? or less no excessive corrosion requirements series name: rp34l shell: 5-shell.size type: receptacle: r assembled straight plug: p assembled right angle plug: lp cable-integrated forming straight plug: pa number of positions: shows the numberof terminals.2contacts.3 contacts type of contact: pd: dip-solder male terminal sc: crimp-style female terminal cable length:( ???? ) depends on each cable. 1 4 5 6 2 3 1 2 4 3 5 6 product name configuration this is available for you to determine the product specifications from a part number, not to produce part numbers. when ordering, please select from existing part numbers shown in page 3-4 of this catalog.[for plugs, hirose will produce cable assemblies to customer specifications. please consult hirose for quote.] description 2 position receptacle 2-position plug 3-position receptacle 3-position plug metal fixture dielectric terminal cover insert insulator terminal metal fixture insulator terminal insulator terminal cover phosphor bronze nylon resin brass vinyl chloride resin nylon resin phosphor bronze phosphor bronze pps resin brass polycarbonate resin vinyl chloride pps resin phosphor bronze solder-plating black color palladium-plating black color black color solder-plating black color palladium-plating black color black color black color palladium-plating ul94hb ul94v-0 ul94hb ul94v-0 ul94v-0 ul94v-0 ul94v-0 remarks processing material note.1) above-stated specifications are typical of this series. for part specific data, please consult factory. 1.contact resistance 2.insulation resistance 3.voltage resistance 4.vibration resistance rp34l - 5 pa - 2 sc ( ???? )
3 receptacles 2-position 3-position rp34l-5r-2pd rp34l-5r-3pd hrs no. 113-5154-6-00 113-5157-4-00 rp34l-5r-2pd rp34l-5r-3pd parts no.
4 plugs rp34l-5pa-2sc(1857) rp34l-5p-3sc RP34L-5LP-3SC hrs no. 113-5153-3-00 113-5158-7-00 113-5161-1-00 rp34l-5pa-2sc(1857) rp34l-5p-3sc RP34L-5LP-3SC parts no
5 crimp terminal applicable tools rp34l-sc1-212(01) hrs no. 113-5151-8-01 rp34l-sc1-212(01) parts no type hrs no. parts no. conformant terminal conformant cable manual crimping tool cable crimping tool drawing tool crimper automatic crimper body -------------- 901-0005-4 901-2043-4 150-0074-1 150-0039-0 ht-102/rp34l-sc1-212 cm-105 ap105-rp34l-sc1-212 rp34-tc-01 rp6-sc-tp rp34l-sc1-212(01) -------------- rp34l-sc1-212(01) -------------- -------------- awg#18 ~ #22 -------------- awg#18 ~ #22 ? 4 --------------
6 assembly instructions(3-position plug) straight plug right angle plug 1. first, pull the bushing through the terminal- processed cable to crimp and wire that terminal. 2. insert such crimped/wired terminal into the terminal hole of s insulation p case.then verify that the crimp terminal is firmly engaged in the terminal hole of s insulation p case by pulling the cable slightly. in such cases as incorrect wiring, insert the drawing jig (rp6-sc-tp) from the fitting section to draw the terminal out of wiring side and rearrange it. 3. next, crimp the clamp to the cable with an applicable tool (rp34-tc-01). 4. install the convex section of s insulation p case in the cord tube(b) by adjusting to its round hole. 5. then put the rim of clamp into the concave section of cord tube(b), and install bushing/clamp in cord tube(b). 6. install cord tube(a) in cord tube(b). at that time, verify that four claw sections of cord tube(b) are mounted on the square hole section of cord tube(a). 1. the right angle plug can also be assembled by using the same procedure as the straight plug.
7 precautions 1. use the connector section with its panel held down so as not to have excessive load.for 2-contact type, hold the outer shellsection of the receptacle, and for 3 contact type, the outer shell section of the plug. 2. after connector assembly, cable must not be pulled over 30n in the arrow-indicated direction. be careful not to add excessive tensile load because it will lead the damage of connectors. <2-core type> <3-core type>
8 the contents of this catalog are current as of april 1999. contents are subject to change without notice for the purpose of imp rovements.
|
