kg series hypertronics corporation toll free: 1-800-225-9228 tel: 978-568-0451 fax: 978-568-0680 www.hypertronics.com 64 h any even number contact positions up to 90 available 2 h very low mating forces h 2styles(seek42): -- plug (with pins) to receptacle (with sockets) -- pins (bed of nails) to receptacle with sockets h alignment pins and keying optional 6 h plugs and carriers have male contacts. h receptacles have female contacts. h .018 (.45mm) pins h two rows on .100 (2.54mm) x .100 (2.54mm) cen- ters h parallel board connectors h as little as .240 (6.1mm) or .480 (12.2mm) between boards connector dimensions 1 notes high density pin & socket p.c. board connectors up to 90 contacts general specifications number contacts 22 -- 90 (any even no. contact count up to 90 available) contact contact diameter current rating contact resistance extraction force contact life cycles insulation resistance insulator material/ temperature rating: material: plating: guide hardware -- 5 5 c to + 105 c .018 (.45) 2.5 amps < 8 milliohms .3 -- 2 oz. >100,000 >10 5 megohms @ 500 vdc breakdown voltage between contacts >1200v rms brass (pin) becu wires & brass body (socket) gold over nickel .050 (1.27) pin carrier .050 nylon stainless steel no. of contacts 1.000 (25.40) 2.200 (55.88) 1.141 (28.99) 2.341 (59.47) dim. a 22 44 46 66 3.300 (83.82) 3.441 (87.41) 68 4.400 (111.76) 4.557 (115.76) 90 24 1.100 (27.94) 1.239 (31.47) 2.100 (53.34) 2.239 (56.87) 3.200 (81.28) 3.341 (84.86) b a (1.27) plug receptacle b a b a .050 (1.27) .060 (1.53) 2 6 10 14 18 22 dielectric withstanding voltage: 900v rms standard sizes (other sizes available) dim. b 22 18 14 10 6 2 3 3 3 1) dimensions in inches (mm). 2) standoffs location will vary depending on the number of contact positions. 3) tolerance: .020 (.5). 4) insulators with < 22 contact positions will not have standoffs. 5) sizes that have standoffs at end position. 6) keying is accomplished by locating alignment pins in different positions. 1 .079 (2.00) 5 3 .200 (5.08) .100 (2.54) .100 (2.54) .240 (6.10) .240 (6.10) .100 (2.54) .100 (2.54) .060 (1.53) .079 (2.00) .079 (2.00) .200 (5.08) max. .060 (1.53) .100 (2.54) .100 (2.54) .240 (6.10) .016 (.40) typ. plating reference male pins: th = 50 in gold (min) over ni female sockets: tah = 50 in gold (min) over ni on mating surface, gold flash over ni on termination tabh = 50 in gold (min) over ni on mating surface, tin/lead over ni on termination (straight d style only) .200 (5.08) max.
kg series hypertronics corporation toll free: 1-800-225-9228 tel: 978-568-0451 fax: 978-568-0680 www.hypertronics.com 65 d straight dip solder terminal styles 1) dimensions in inches (mm). 2) all dimensions are based upon insulators having standoffs. 3) all the tails are .015 (.4) long. 4) crimp contacts will be shipped unmounted. notes: plugs receptacles ref. r crimp accepts 22, 24 and 26 awg wire stripped back .173 (4.4) pin carrier s solder cup accepts up to 22 awg wire stripped back .125 (3.2) 4 .018 (.46) .018 (.46) .018 (.46) .134 2 (3.40) .154 2 (3.90) .154 2 (3.90) .163 (4.14) mating length .153 (3.90) mating length .051 (1.30) .035 (.90) hole .051 (1.30) .035 (.90) hole .185 2 (4.70) .185 2 (4.70) .057 (1.45) .039 (1.00) hole .225 2 (5.71) .039 (1.00) hole .225 2 (5.71) .057 (1.45)
kg series hypertronics corporation toll free: 1-800-225-9228 tel: 978-568-0451 fax: 978-568-0680 www.hypertronics.com 66 11 mounting styles 00 no mounting hardware 1) dimensions in inches (mm) 2) 9.5 oz d in [.07 n d m (.68kg d cm)] torque. notes: plugs receptacles ref. pin carrier .198 (5.02) .198 (5.02) .198 (5.02) a .100 (2.54) .100 (2.54) mounting dimensions 1 (top of board) mother board application style00&11 (receptacle) 1.000 (25.40) 2.200 (55.88) dim. a 22 44 46 66 3.300 (83.82) 68 4.400 (111.76) 90 24 1.100 (27.94) 2.100 (53.34) 3.200 (81.28) no. of contacts flange #1 #3 #2 .106 (2.70) hole .124 (3.14) hex 2 .106 (2.70) hole .106 (2.70) hole .124 (3.14) hex 2 .124 (3.14) hex 2 n holes .025 (.63) .060 (1.5) for mounting
kg series hypertronics corporation toll free: 1-800-225-9228 tel: 978-568-0451 fax: 978-568-0680 www.hypertronics.com 67 see pg. 65
kg series hypertronics corporation toll free: 1-800-225-9228 tel: 978-568-0451 fax: 978-568-0680 www.hypertronics.com 68 ordering information kg 22 number of contacts: any even number of contact positions up to 90 p=plug e = receptacle a = pin carrier terminal style: d = straight solder dip r=crimp s = solder cup plating: th, tabh, tah (see page k35) guide pin locations 1 mounting style 1 =11 use 00 if hardware is not required b e d tabh 11 p1,22 guide hole locations 1 h2,21 1) style 11 uses 1 contact position per guide pin. for a mated pair, holes and guides must be complementary (i.e., if position 1 in the plug has a guide pin then, position 1 in the receptacle must have a guide hole, etc.). if omitted, connectors will be shipped fully loaded without guiding hardware. h = high temp. application (consult fac- tory) omit for nylon notes: kg 22 b p d th 11 p2,21 h1,22 see notes accessories crimp tool afm8 or (m22520/2--01) positioner ss1.0045 insertion tool s/mont1.0045 kg 22 b p d 11 th-p2-21-h1-22 kg 22 b e d 11 tabh-p1-22-h2-21 (see page 64)
|
