published date : apr 30,2005 drawing no : xdsa7811 v1 checked : b.l.liu p.1/3 www .sunled.com part number: XZZY64W-3 subminiature solid state lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XZZY64W-3 yellow ingaalp water clear 280 547 590 20 notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.25(0.01") unless otherwise noted. features b subminiature package. b gull wing. b long life - solid state reliability. b low package profile. b package :1000pcs / reel. b rohs compliant. absolute maximum ratings (t a =25c ) ) ) ) zy (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 140 ma power dissipation p t 120 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 zy (ingaalp) unit forward voltage (typ.) (i f =20ma) v f 2.3 v forward voltage (max.) (i f =20ma) v f 2.8 v reverse current (v r =5v) i r 10 ua wavelength of peak emission (i f =20ma) p 590 nm wavelength of dominant emission (i f =20ma) d 589 nm spectral line full width at half-maximum (i f =20ma) ? 20 nm capacitance (v f =0v, f=1mhz) c 45 pf operating characteristics (t a =25c ) ) ) )
published date : apr 30,2005 drawing no : xdsa7811 v1 checked : b.l.liu p.2/3 www .sunled.com part number: XZZY64W-3 subminiature solid state lamp zy
published date : apr 30,2005 drawing no : xdsa7811 v1 checked : b.l.liu p.3/3 www .sunled.com part number: XZZY64W-3 subminiature solid state lamp recommended soldering pattern (units : mm; tolerance: 0.1) tape specification (units : mm) remarks: if special sorting is required (e.g. binning based on forward voltage, luminous intensity or wavelength), the typical accuracy of the sorting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
|