0303 thin film on silicon resistor surface mount, top-side termination/bottom isolated state of the art, inc. 2470 fox hill road, state college, pa 16803-1797 phone (814) 355-8004 fax (814) 355-2714 toll free 1-800-458-3401 where quality isn't a goal...it's our tradition silicon chips are only packaged in waffle pack at a maximum of 400 per tray. packaging sota offers a full line of component parts in the 0303 size including termination style d (top-side termination with isolated metalized bottom) and style f (back contact resistor - bcr). also offered are multi-tap and center-tap configurations. options performance characteristics tcr (-55 to +125 c in ppm/c) thermal shock low temperature operation short-time overload resistance to bonding exposure moisture resistance high temperature exposure life (1) minimum resistance range at 0.1% tolerance is 100 ohms. (2) 0.05% in limited availability - consult factory <25ppm 0.02% 0.02% 0.02% 0.03% 0.05% 0.05% see chart environmental performance resistance range (1) tolerances (2) maximum power maximum voltage 5w-1mw 0.1%, 0.25%, 0.5%, 1%, 2%, 5%, 10% 250 mw 100 volts tcr e: 25 ppm h: 50 ppm k: 100 ppm termination material w: gold a: aluminum s0303as 150 j h w tolerances b: 0.1% c: 0.25% d: 0.5% f: 1% g: 2% j: 5% k: 10% m: 20% resistance value three or four digits are used with all leading digits significant. four digits are used for 1% tolerance or lower, otherwise three digits are used. the last digit specifies the number of zeros to add. the letter "r" is used to represent the decimal for fractional ohmic values. example: 5r6 is 5.6 ohms. mechanical length width thickness termination approx. weight inches .030 (+.002/-.002) .030 (+.002/-.002) .009 - .012 .004 - .006 .00042 grams mm .76 (+.05/-.05) .76 (+.05/-.05) .23 - .30 .10 - .15 current noise typical life test performance power dissipation power derating 10,000 a sio 2 o precision thin film resistor bonding pads silicon chip (style depends on value) ? tcr's to 25 ppm ? delivers greater power handling capability and lighter weight for the size than chips constructed on alumina. ? tolerances to 0.1% ? operating temperature range : -55c to +150c ? for high-density hybrid circuits where space is at a premium. features
|