published date : jan 22,2008 drawing no : xdsa5504 v3 checked : b.l.l iu p.1/4 part number: XZSG45W-2 3.5x2.8mm smd chip led lamp part number emitting color emitting material lens-color luminous intensity (if=20ma) mcd wavelength nm p viewing angle 2 1/2 min. typ. XZSG45W-2 green ingaalp water clear 70 248 574 40 features z single color. z suitable for all smt assembly and solder process. z ideal for backlighting. z available on tape and reel. z package : 500pcs / reel. z moisture sensitivity level : level 3. z rohs compliant. notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.2(0. 008") unless otherwise noted. 3. specifications are subjec t to change without notice. absolute maximum ratings (t a =25c ) sg (ingaalp) unit reverse voltage v r 5 v forward current i f 30 ma forward current (peak) 1/10 duty cycle 0.1ms pulse width i fs 150 ma power dissipation p t 75 mw operating temperature t a -40 ~ +85 c storage temperature tstg -40 ~ +85 sg (ingaalp) unit forward voltage (typ.) (i f =20ma) v f 2.1 v forward voltage (max.) (i f =20ma) v f 2.5 v reverse current (max.) (v r =5v) i r 10 ua wavelength of peak emission (typ.) (i f =20ma) p 574 nm wavelength of dominant emission (typ.) (i f =20ma) d 568 nm spectral line full width at half-maximum (typ.) (i f =20ma) ? 26 nm capacitance (v f =0v, f=1mhz) c 20 pf operating characteristics (t a =25c )
published date : jan 22,2008 drawing no : xdsa5504 v3 checked : b.l.l iu p.2/4 part number: XZSG45W-2 3.5x2.8mm smd chip led lamp ? sg
published date : jan 22,2008 drawing no : xdsa5504 v3 checked : b.l.l iu p.3/4 part number: XZSG45W-2 3.5x2.8mm smd chip led lamp ? recommended solering pattern (units : mm; tolerance: 0.1) ? tape specification (units : mm) ? the device has a single mounting surface. the device must be mounted according to the specifications. remarks: if special sorting is required (e.g. binn ing based on forward voltage, luminous intensity / luminous flux, or wavelength), the typical accuracy of the so rting process is as follows: 1. wavelength: +/-1nm 2. luminous intensity / luminous flux: +/-15% 3. forward voltage: +/-0.1v note: accuracy may depend on the sorting parameters.
published date : jan 22,2008 drawing no : xdsa5504 v3 checked : b.l.l iu p.4/4 part number: XZSG45W-2 3.5x2.8mm smd chip led lamp packing & label specifications XZSG45W-2
|