technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 1 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles features ? plcc-3 package. ? high flux output. ? high current capability. ? white package. ? optical indicator. ? colorless clear window. ? ideal for backlight and light pipe application. ? inter reflector. ? wide viewing angle. ? suitable for automatic placement equipment. ? suitable for reflow and wave solder processes. ? available on tape and reel (8mm tape). ? pb-free. ? the product itself will remain within rohs compliant version. descriptions the 67-31b series is available in so ft orange,red,green,blue and yellow. due to the package design, the led has wide viewing angle and optimi zed light coupling by inter reflector. this feature makes the ideal for light pipe applicati on. the low current requirement makes this device ideal for portable equipment or any ot her application where power is at a premium. applications ? indicator and backlight for audio and video equipment. ? indicator and backlight in office and family equipment. ? flat backlight for lcd?s, switches and symbols. ? light pipe application. ? general use. device selection guide chip material emitted color resin color ingan blue water clear
technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 2 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles package dimensions note: the tolerances unless mentioned is 0.1mm ;unit = mm
technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 3 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles absolute maximum ratings (t a =25 ) parameter symbol rating unit reverse voltage v r 5 v forward current i f 30 ma peak forward current(duty 1/10 @1khz) i fp 100 ma power dissipation pd 110 mw electrostatic discharge(hbm) esd 2000 v operating temperature t opr -40 ~ +85 storage temperature t stg -40 ~ +90 soldering temperature tsol reflow soldering : 260 for 10 sec. hand soldering : 350 for 3 sec. electronic optical characteristics : parameter symbol min. typ. max. unit condition luminous intensity i v 900 ----- 2250 mcd i f =30ma viewing angle 2 1/2 ----- 60 ----- deg i f =30ma peak wavelength p ----- 468 ----- nm i f =30ma dominant wavelength d 464.5 ----- 476.5 nm i f =30ma spectrum radiation bandwidth ----- 25 ----- nm i f =30ma forward voltage v f 2.75 ----- 3.95 v i f =30ma reverse current i r ----- ----- 50 a v r =5v notes: 1.tolerance of luminous intensity : 11% 2.tolerance of dominant wavelength : 1nm 3.tolerance of forward voltage : 0.1v
technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 4 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles bin range of luminous intensity bin min. max. unit condition v2 900 1120 w1 1120 1420 w2 1420 1800 x1 1800 2250 mcd i f =30ma bin range of dominant wavelengths group bin min. max. unit condition a9 464.5 467.5 a10 467.5 470.5 a11 470.5 473.5 a a12 473.5 476.5 nm i f =30ma bin range of forward voltage group bin min. max. unit condition 5 2.75 3.05 6 3.05 3.35 7 3.35 3.65 m 8 3.65 3.95 v i f =30ma notes: 1.tolerance of luminous intensity : 11% 2.tolerance of dominant wavelength : 1nm 3.tolerance of forward voltage : 0.1v
technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 5 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles typical electro-optical characteristic curves forward current derating curve relative luminous intensity %) ( 0 10 20 30 40 4.0 3.6 3.2 3.0 3.8 relative luminous intensity -60 1 10 -20 -40 0 20 60 40 100 80 100 % ) ( 1000 relative luminous intensity vs. ambient temperature relative luminous intensity 0 10 1 1 10 2 10 forward current relative luminous intensity vs d u t y = 1 / 1 0 10 100 f = 1 k h z ) 1000 ( % ta=25 radiation diagram 0 10 0 20 30 40 50 40 20 60 100 85 2.8 spectrum distribution forward voltage ta=25c forward current vs. wavelength (nm) forward current i (ma) forward current i (ma) f forward current i (ma) f ambient temperature ta (c) ambient temperature ta (c)
technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 6 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is 0.1mm, unit = mm
technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 7 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles carrier tape dimensions: loaded quantity 500 pcs per reel. _ _ + _ note: tolerances unless men tioned 0.1mm, unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 8 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level 90% ltpd 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260 5 min. 5 sec. 6 min. 22 pcs 0/1 2 temperature cycle h : +100 15min 5 min l : -40 15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100 5min 10 sec l : -10 5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100 1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40 1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 30 ma / 25 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85 /85%rh 1000 hrs. 22 pcs. 0/1
technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 9 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles precautions for use 1. over-current-proof customer must apply resistors for protection, ot herwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30 or less and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30 or less and 60% rh or less. if unused leds remain, it should be st ored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 5 for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 120 sec. max. 1~5 c / sec. pre-heating 180~200c 60 sec. max. above 220c 260c. max. 10 sec. max. 1~5 c / sec. 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put st ress on the leds during heating. 3.4 after soldering, do not warp the circuit board. 4. soldering iron each terminal is to go to the tip of soldering iron temper ature less than 350 for 3 seconds within once in less than the soldering iron capac ity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful beca use the damage of the product is often started at the time of the hand solder.
technical data sheet power top view leds with lens 67-31b/b7c-av2x1mz3/bt everlight electronics co., ltd. http://www.ever light.com rev.1 page: 10 of 10 device no. :dse-0001077 prepared date:31-dec.-2008 prepared by: giles 5. repairing repair should not be done after the leds have b een soldered. when repairing is unavoidable, a double-head soldering iron should be used (as be low figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiw an, r.o.c http://www.everlight.com
|
