outline this series of connectors is best suited to for wiring within ultra miniature electronic equipment such as cellular phones, notebook-type personal computers, personal digital assistants pda (pda: personal digital assistants). wiring in the moving hinge part of the newest two-axis rotation type cellular phones, can be more easily designed than with conventional flexible print circuits fpc (fpc: flexible print circuits). further, by narrowing the width of the cable plug to i ts utmost limit, these assembled connectors can be passed through the inside diameter of a hinge, so that workability during assembly can be improved. mating height: 1.2 mm mating width: 5.1 mm 5.1mm 1.2mm printed in japan specifications are subject to change without notice. address : 6-18-12, megurohoncho, meguro-ku, tokyo 152-8520, japan / telephone : +81-3-3714-1151/1161 / fax : +81-3-5721-7090 l vx series connector l vx series connector
ultra-miniature type connector, one of the lowest profiles in this industry; mating height: 1.2 mm (refer to figure below) this connector achieves 0.4 mm pitch and low profile 1.2 mm mating height. therefore the connector contributes to reduced equipment thickness. structure permits easy designing of pcb circuits by adopting vertical mating of connectors, flexibility is increased for connector mounting position. further, by attaching an insulator on the bottom surface of the connector, circuit patterns can be designed on the surface., and structure permits easy designing of pcb circuits. assembly workability is improved. by narrowing the width of the cable plug to its utmost limit of 2.8 mm, an assembled connector can be passed through the inside diameter of a hinge. further, vertical mating of connectors improves assembly workability. structure takes into account electrical noise prevention ultra thin coaxial cable (42 awg) can be used, and by covering the connector with a metal shell, electrical noise can be prevented. mounting setting up a suction surface on the receptacle allows for automatic mounting with pcb, and utilizes pulse-heat soldering technique, which minimizes cable damage during attachment. 2.8mm features product part no. specifications contact no. 30 40 cable plug l vx-a30lmsg l vx-a40lmsg receptacle l vx-a30sfyg l vx-a40sfyg rated current rated voltage t emperature range relative humidity 0.2 a/contact 100v ac (rms) -20 to +70 ?c 95 rh or less assembled cable plug passing through hinge hole (1) assembled cable plug passing through hinge hole (2) cable plug (width: 2.8 mm) receptacle
|
