View 12-22-G6R8C-A30-2C_3722400.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 1 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui technical data sheet right angle lens chip leds with bi-color (multi-color) 12-22/g6r8c-a30/2c features ? package in 8mm tape on 7 ? diameter reel. ? compatible with automatic placement equipment. ? compatible with infrared and vapor phase reflow solder process. ? multi-color type. ? pb-free. ? the product itself will remain within rohs compliant version. descriptions ? the 12-22 smd led is much smaller than lead frame type components, thus enable smaller board size, higher packing density, reduced storage space and finally smaller equipment to be obtained. ? besides, lightweight makes them ideal for miniature applications. etc. applications ? backlighting in dashboard and switch. ? telecommunication: indicator and backlighting in telephone and fax. ? flat backlight for lcd, switch and symbol. ? general use. device selection guide chip type material emitted color resin color g6 algainp brilliant yellow green r8 algainp deep red water clear
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 2 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui package outline dimensions note: the tolerances unless mentioned is ? 0.1mm ,unit = mm
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 3 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui absolute maximum ratings (ta=25
) parameter symbol rating unit reverse voltage v r 5 v forward current i f g6:25 r8:25 ma peak forward current (duty 1/10 @1khz) i fp g6:60 r8:60 ma power dissipation pd g6:60 r8:60 mw electrostatic discharge(hbm) esd g6:2000 r8:2000 v operating temperature topr -40 ~ +85
storage temperature tstg -40~ +90
soldering temperature tsol reflow soldering : 260
for 10 sec. hand soldering : 350
for 3 sec.
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 4 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui electro-optical characteristics (ta=25
) parameter symbol min. typ. max. unit condition luminous intensity iv g6 r8 28.5 28.5 ----- ----- 72.0 72.0 mcd viewing angle 2 1/2 ----- 120 ----- deg peak wavelength ? p g6 r8 ----- 575 650 ----- nm dominant wavelength ? d g6 r8 ----- ----- 573 639 ----- ----- nm spectrum radiation bandwidth ?? g6 r8 ----- 20 20 ----- nm forward voltage v f g6 r8 1.7 1.7 2.0 2.0 2.4 2.4 v i f =20ma reverse current i r g6 r8 ----- ----- 10 10 ? a v r =5v notes: 1.tolerance of luminous intensity ? 11%
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 5 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui bin range of luminous intensity g6 bin min max unit condition n 28.5 45.0 p 45.0 72.0 mcd i f =20ma r8 bin min max unit condition n 28.5 45.0 p 45.0 72.0 mcd i f =20ma notes: 1.tolerance of luminous intensity ? 11%
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 6 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui typical electro-optical characteristics curves g6
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 7 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui typical electro-optical characteristics curves r8
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 8 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui label explanation cat: luminous intensity rank hue: dom. wavelength rank ref: forward voltage rank reel dimensions note: the tolerances unless mentioned is ? 0.1mm ,unit = mm
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 9 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui carrier tape dimensions: loaded quantity 2000 pcs per reel note: the tolerances unless mentioned is ? 0.1mm ,unit = mm moisture resistant packaging label desiccant label aluminum moisture-proof bag
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 10 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui reliability test items and conditions the reliability of products shall be satisfied with items listed below. confidence level j 90% ltpd j 10% no. items test condition test hours/cycles sample size ac/re 1 reflow soldering temp. : 260
? 5
min. 5sec. 6 min. 22 pcs. 0/1 2 temperature cycle h : +100
15min 5 min l : -40
15min 300 cycles 22 pcs. 0/1 3 thermal shock h : +100
5min 10 sec l : -10
5min 300 cycles 22 pcs. 0/1 4 high temperature storage temp. : 100
1000 hrs. 22 pcs. 0/1 5 low temperature storage temp. : -40
1000 hrs. 22 pcs. 0/1 6 dc operating life i f = 20 ma 1000 hrs. 22 pcs. 0/1 7 high temperature / high humidity 85
/ 85%rh 1000 hrs. 22 pcs. 0/1
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 11 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui precautions for use 1. over-current-proof customer must apply resistors for protection, otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package: the leds should be kept at 30
or less and 90%rh or less. 2.3 after opening the package: the led's floor life is 1 year under 30
or less and 60% rh or less. if unused leds remain, it should be stored in moisture proof packages. 2.4 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 ? 5
for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
lifecyclephase: revision : 1 expired period: forever release date:2008-09-20 00:16:09.0 everlight electronics co.,ltd. 12-22/g6r8c-a30/2c everlight electronics co., ltd. http://www.everlight.com rev: 1 page: 12 of 12 device no: szdse-122-a24 prepared date:10-nov-2007 prepared by: leihui 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than 350
for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiwan, r.o.c http://www.everlight.com

▲Up To Search▲

Price & Availability of 12-22-G6R8C-A30-2C

	To Download 12-22-G6R8C-A30-2C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .