SBS004M no.6907-1/3 applications ? high frequency rectification (switching regulators, converters, choppers). features ? low forward voltage (i f =0.5a, v f max=0.35v) (i f =1.0a, v f max=0.4v). ? ultrasmall-sized package permitting applied sets to be made small and slim (mounting height 0.85mm). specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit repetitive peak reverse voltage v rrm 15 v nonrepetitive peak reverse surge voltage v rsm 15 v average output current i o 1a surge forward current i fsm 50hz sine wave, 1 cycle 10 a junction temperature tj --55 to +125 c storage temperature tstg --55 to +125 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit reverse voltage v r i r =1ma 15 v forward voltage v f 1i f =0.5a 0.30 0.35 v v f 2i f =1a 0.35 0.40 v reverse current i r v r =6v 500 m a interterminal capacitance c v r =10v, f=1mhz 42 pf reverse recovery time t rr i f =i r =100ma, see specified test circuit. 15 ns thermal resistance rth(j-a) mounted on a ceramic board (600mm 2 5 0.8mm) 138 c / w marking : sa sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn6907 SBS004M package dimensions unit : mm 1305 [SBS004M] 12501 gi im any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. schottky barrier diode 15v, 1a rectifier 1 : anode 2 : no contact 3 : cathode sanyo : mcph3 0.25 0.25 2.1 1.6 2.0 0.65 0.3 0.85 0.15 12 3 0.15
SBS004M no.6907-2/3 t rr test circuit duty 10% 50 100 10 --5v t rr 100ma 100ma 10ma 10 s (1)rectangular wave q =60 (2)rectangular wave q =120 (3)rectangular wave q =180 (4)sine wave q =180 from top ta=125 c 100 c 75 c 50 c 25 c 180 360 (2) (4) (3) (1) 1.0 10 2 2 3 100 1.0 10 2 3 5 7 2 3 5 7 357 2 c -- v r f=1mhz 0 100 10 1.0 0.1 0.01 5 7 3 2 5 7 3 2 5 7 3 2 5 7 3 2 15 510 i r -- v r 0 0 0.2 0.4 0.6 0.8 0.8 0.7 0.6 0.4 0.3 0.2 0.1 0.5 1.0 1.2 1.4 p f (av) -- i o 0 0.1 0.01 0.3 0.4 0.5 0.1 0.2 1.0 2 7 5 3 2 7 5 3 2 i f -- v f ta=125 c 25 c 50 c 75 c 100 c it02957 it02958 it02959 it02960 i s 20ms t 7 0.01 23 7 0.1 0 52 2 37 1.0 5 12 10 8 6 4 2 3 i s -- t it00636 forward voltage, v f -- v forward current, i f -- a reverse voltage, v r -- v reverse current, i r -- ma average forward current, i o -- a average forward power dissipation, p f (av) -- w q 360 rectangular wave sine wave reverse voltage, v r -- v interterminal capacitance, c -- pf current waveform 50hz sine wave time, t -- s surge forward current, i fsm (peak) -- a
SBS004M no.6907-3/3 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of january, 2001. specifications and information herein are subject to change without notice. ps
|
