m specifications electrical current and voltage rating: make and break resistive load 0.5 amp @ 28 vdc; 0.125 amp @ 115 vac. current carrying capacity: 10 amps. dielectric strength: 1,500 vac between current carrying parts and ground. contact resistance: average initial 10 milliohms. insulation resistance: in excess of 1,000,000 megohms hardware: mounting nut and lockwasher are shipped assembled. epoxy glass insulation switches - 30 indexing adjustable stops set @ 2 pos. - solder lug terminals specifications and ordering information m6 - series 1 3/4" square 0.5 amp @ 28 vdc the m6 series was originally designed to meet the requirements of mil-s- 3786/40. standard construction includes 30 indexing up to 12 positions, solder lug terminals, and adjustable stops. switching is available up to 32 positions. mechanical materials and finishes: all parts utilize non-corrosive materials as standard. clips and rotors: silver alloy composite as standard. insulation: glass epoxy. index: dual-ball, hill and valley design. index life: 25,000 cycles minimum. index torque: switches have lowest practical torque consistent with crisp detenting and smooth, reliable operation. index angles: positive 30 standard, 11.25 , 15 , and 22.5 available. index stops: adjustable standard, or continuous. stop strength: 50 in. lbs. minimum. standard part number dimensions * figures are shown on page 57. standard construction m6g - glass epoxy construction 50 unit of electro switch corp. ? electronic products 2010 yonkers road raleigh, nc 27604 telephone: (888) rotarys or (919) 833-0707 fax: (800) 909-9171 or (919) 833-8016 active poles/ no. of shorting non- fig. poles positions section sections shorting * 01 02-12 1 1 M6G0112S m6g0112n mc 02 02-12 1 2 m6g0212s m6g0212n mc 02 02-06 2 1 m6g0206s m6g0206n md 03 02-12 1 3 m6g0312s m6g0312n mc 04 02-12 1 4 m6g0412s m6g0412n mc 04 02-06 2 2 m6g0406s m6g0406n md 06 02-06 2 3 m6g0606s m6g0606n md 08 02-06 2 4 m6g0806s m6g0806n md
m m6 g customers specified order number for standard options (specify) (specify) (specify) (specify) (specify) (specify) (specify) (specify) additional options additional options and ordering information m6 - series custom switches are available. contact the factory with your complete specifications. unit of electro switch corp. ? electronic products 2010 yonkers road raleigh, nc 27604 telephone: (888) rotarys or (919) 833-0707 fax: (800) 909-9171 or (919) 833-8016 51 shaft as viewed with non-turn lug at 9 o'clock and shaft in extreme ccw position and strut bolts oriented vertically. shaft , bushing , and flat options printed circuit board options p.c. board mounting pattern r u 2 digit insulation total active contact series type poles positions type terminal index stop shaft/ shaft type angle type bushing flat m6 g - glass 01 - min. 12 - max @ 30 n - non- 16 - max @22.5 shorting s - shorting m6 g - glass 01 - min. 32 - max @11.5 s - shorting 24 - max @ 15 l - solder lug 11.5 a - adj. r - rear p.c. 15 c - cont. 22.5 30 see see chart chart "a" "b" how to order additional options:
|