series amldv-nz up to 700ma | led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12.a 1 of 8 north america only features: models single output model input voltage (v) output voltage (v) output current (ma) efficiency max (%) amldv-4830-nz 5.5-48 3.3-36 300 96 AMLDV-4835-NZ 5.5-48 3.3-36 350 96 amldv-4850-nz 5.5-48 3.3-36 500 96 amldv-4860-nz 5.5-48 3.3-36 600 96 amldv-4870-nz 5.5-48 3.3-36 700 96 note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. input specifications parameters nominal typical maximum units voltage range 24 5.5-48 vdc absolute maxi mum rating( 10sec) 5-55 vdc on/off control (analog control) (leave open if not used) on: open or 2.8v> v <6v off: v <0.6v remote pin current v=5v 1 ma quiescent input current in shutdown mode vin=24v, v<0.6v 400 a dimming control (digital control) max pwm frequency: 200hz dimming control (analog control) (leave open if not used) input voltage range (vin=5.5-48v) output current range(vin=5.5-48v) 0-15v 0-100% control voltage range(full on) control voltage range(full off) 0.2v50mv 4.5v50mv driving current(v=5v) 0.2ma(max) input filter capacitor output specifications parameters conditions typical maximum units current accuracy 2 3 % short circuit protection continuous, automatic recovery efficiency at full load 96 % max load capacitance 1000 f ripple & noise 20mhz bandwidth 120 mv p-p temperature coefficient -40 o c to+71 o c 0.015 %/oc output current stability vin=48v, vo=3.3~36v 1 % internal power dissipation vin=24v,5leds 700 mw general specifications parameters conditions typical maximum units switching frequency 100% load 370 320-420 khz operating temperature 300ma,350ma -40 to +85 o c 500ma,600ma,700ma -40 to+71 o c storage temperature -55 to +125 o c max case temperature 100 o c cooling free air convection humidity 95 % rh ? high power led driver ? constant current output mode ? ultra wide input voltage range ? high efficiency (up to 96%) ? remote on/off function ? pwm & analogue dimming function ? smd package ? operating temperature range -40oc - +85oc
series amldv-nz up to 700ma | led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12.a 2 of 8 north america only general specifications (continued) parameters conditions typical maximum units case material plastic ul94-vo potting material epoxy resin(flammability ul94v-0) weight 6 g dimensions (l x w x h) 0.939 0.713 0.315 inches 23.86 18.10 8.00 mm mtbf >2 000 000 hrs (mil-hdbk-217 f at +25 o c) safety specifications parameters standards designed to meet: en 55022, class b, iec/en 61000-4-2 ( perf. criteria b), iec/en 61000-4-3 ( perf. criteria b), iec/en 61000-4-4 ( perf. criteria b), iec/en 61000-4-5 ( perf. criteria b), iec/en 61000-4-5 ( perf. criteria b) pin out specifications dimensions 18.10 (0.71) 7.50 (0.30) top view side view 8.00 (0.32) 1 7 9 10 16 23.86 (0.94) 1.02 (0.04) 2.54 (0.10) 8 13.70 (0.54) 3.04 (0.12) a 1.40 0.20 (0.055 0.008) max 0.25 (0.01) 5.00o max a 0.25 (0.01) front view pin single 1 -v input dc supply 7 remote on/off pwm dimming pwm/on/off or not used 8 -v output led cathode connection 9 +v output led anode connection 10 analogue dimming analogue dimming or not used 16 +v input + dc supply
series amldv-nz up to 700ma | led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12.a 3 of 8 north america only derating typical application circuits
series amldv-nz up to 700ma | led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12.a 4 of 8 north america only pwm dimming control note: formula is for reference; actual output current may depend on loading. the time on of pulse must be > 0.7ms analogue dimming control pwm digital control signal 1 0 1 0 output current 1 0 1 0 output current leds appear dim pwm digital control signal 1 0 1 0 output current leds appear bright pwm digital control signal amldv-nz -vin +vout 1 1 -vout +vin 1 16 10 8 9 0 to 10vdc 5.6k 5.1k 7 on/off (optional)
series amldv-nz up to 700ma | led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12.a 5 of 8 north america only recommended emc circuit amldv-nz -vin pwm dimming on/off +vout 1 1 -vout +vin 1 16 10 7 analogue dimming 8 9 1.0 f 1.0 f 1,25mh 2.2 f 470 f 1 smcg51 recommended ac input circuit amldv-nz -vin pwm dimming on/off +vout 1 1 -vout 1 16 10 7 analogue dimming 8 9 + ac in ac in 5vac to 32vac - 0.1uf optional 100uf to 330uf +vin
series amldv-nz up to 700ma | led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12.a 6 of 8 north america only efficiency versus input voltage
series amldv-nz up to 700ma | led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12.a 7 of 8 north america only
series amldv-nz up to 700ma | led driver www.aimtec.com tel: +1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r12.a 8 of 8 north america only output current versus dimming voltage note: 1. datasheets are updated as needed and as such, specifications ar e subject to change without notic e. once printed or downloaded , datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown, including safety agency cert ifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an am bient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited information are considered proprietary an d may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control sys tems or other such applications which necessitate specific safety and regulatory standards ot her the ones listed in this datasheet. 7. warranty is in accordance with aimtec?s st andard terms of sale available at www.aimtec.com.
|
