2sj595 no.6978-1/4 features ? low on-resistance. ? ultrahigh-speed switching. ? 4v drive. sanyo electric co.,ltd. semiconductor company tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : enn6978 2sj595 package dimensions unit : mm 2083b unit : mm 2092b [2sj595] 62501 ts im ta-3118 any and all sanyo products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo representative nearest you before using any sanyo products described or contained herein in such applications. sanyo assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo products described or contained herein. p-channel silicon mosfet dc / dc converter applications 1 : gate 2 : drain 3 : source 4 : drain sanyo : tp 5.0 6.5 0.85 0.7 0.6 1.5 5.5 7.0 0.8 1.6 7.5 0.5 1.2 2.3 0.5 1 23 4 2.3 2.3 preliminary 6.5 2.3 0.5 1.5 5.5 0.8 7.0 1.2 2.5 5.0 0.85 0.5 1.2 0 to 0.2 2.3 2.3 0.6 12 4 3 1 : gate 2 : drain 3 : source 4 : drain sanyo : tp-fa [2sj595]
2sj595 no.6978-2/4 specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit drain-to-source voltage v dss --60 v gate-to-source voltage v gss 20 v drain current (dc) i d -- 6 a drain current (pulse) i dp pw 10 m s, duty cycle 1% --24 a allowable power dissipation p d 1w tc=25 c20w channel temperature tch 150 c storage temperature tstg --55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit drain-to-source breakdown voltage v (br)dss i d =--1ma, v gs =0 --60 v zero-gate voltage drain current i dss v ds =--60v, v gs =0 --10 m a gate-to-source leakage current i gss v gs = 16v, v ds =0 10 m a cutoff voltage v gs (off) v ds =--10v, i d =--1ma --1.0 --2.4 v forward transfer admittance ? yfs ? v ds =--10v, i d =--3a 3.4 4.8 s static drain-to-source on-state resistance r ds (on)1 i d =--3a, v gs =--10v 170 220 m w r ds (on)2 i d =--1a, v gs =--4v 235 330 m w input capacitance ciss v ds =--20v, f=1mhz 440 pf output capacitance coss v ds =--20v, f=1mhz 110 pf reverse transfer capacitance crss v ds =--20v, f=1mhz 33 pf turn-on delay time t d (on) see specified test circuit 9 ns rise time t r see specified test circuit 21 ns turn-off delay time t d (off) see specified test circuit 60 ns fall time t f see specified test circuit 27 ns total gate charge qg v ds =--10v, v gs =--10v, i d =--6a 14 nc gate-to-source charge qgs v ds =--10v, v gs =--10v, i d =--6a 2 nc gate-to-drain miller charge qgd v ds =--10v, v gs =--10v, i d =--6a 3.7 nc diode forward voltage v sd i s =--6a, v gs =0 --0.91 --1.2 v marking : j595 switching time test circuit pw=10 s d.c. 1% 0v --10v v in p. g 50 g s i d = --3a r l =10 v dd = --30v v out 2sj595 v in d
2sj595 no.6978-3/4 0 --2 --4 --6 --8 --10 --12 --14 --16 --18 --20 50 100 200 250 150 300 400 450 350 500 0 --2.0 --2.5 --4.0 --4.5 --5.0 0 --0.5 --1.0 --1.5 --3.0 --3.5 0 -- 2 -- 4 -- 6 --12 --10 -- 8 v ds = --10v 0 0 -- 1 -- 3 --0.4 -- 2 -- 7 -- 6 -- 5 -- 4 --0.8 --1.2 --1.6 --2.0 --0.2 --0.6 --1.0 --1.4 --1.8 v gs = --2.5v 100 150 50 200 250 300 350 400 0 tc=25 c it03344 it03345 it03346 it03347 --60 --40 --20 0 20 40 60 80 100 120 160 140 --3.0v i d = --1a, v gs = --4v i d = --3a, v gs = --10v --10.0v --6.0v --5.0v i d = --1a --3a --8.0v --3.5v --4.0v r ds (on) -- v gs i d -- v ds i d -- v gs r ds (on) -- tc static drain-to-source on-state resistance, r ds (on) -- m static drain-to-source on-state resistance, r ds (on) -- m gate-to-source voltage, v gs -- v drain-to-source voltage, v ds -- v drain current, i d -- a gate-to-source voltage, v gs -- v drain current, i d -- a case temperature, tc -- c it03348 it03349 0.01 0.1 --0.001 23 57 23 57 23 57 23 57 --0.01 --0.1 --1.0 2 10 1.0 7 5 3 2 7 5 3 2 7 5 3 2 --0.01 --0.1 2 --10 --1.0 7 5 3 2 7 5 3 2 7 5 3 2 2 --10 v ds = --10v --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 v gs =0 --25 c 25 c tc=75 c --0.1 23 57 --1.0 23 57 --10 2 10 7 5 3 7 5 3 2 2 100 2 v dd = --30v v gs = --10v t d (on) t d (off) t r t f it03350 0 10 100 --10 --20 2 1000 7 5 3 2 7 5 3 2 --60 --30 --40 --50 f=1mhz ciss coss crss it03351 sw time -- i d ciss, coss, crss -- v ds ? y fs ? -- i d i f -- v sd drain current, i d -- a switching time, sw time -- ns drain current, i d -- a forward transfer admittance, ? y fs ? -- s diode forward voltage, v sd -- v forward current, i f -- a drain-to-source voltage, v ds -- v ciss, coss, crss -- pf 75 c --25 c tc= --25 c tc=75 c 25 c 25 c 75 c 25 c tc= --25 c
2sj595 no.6978-4/4 specifications of any and all sanyo products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo electric co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo electric co. , ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. sanyo believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. this catalog provides information as of june, 2001. specifications and information herein are subject to change without notice. ps 1.2 1.0 0.8 0.6 0.4 0.2 0 0 --0.1 --1.0 --10 414 12 10 8 6 2 0 -- 1 -- 2 -- 3 -- 4 -- 5 -- 6 -- 7 -- 8 -- 9 --10 v ds = --10v i d = --6a it03352 dc operation 100 s 10 s 1ms 100ms 10ms i dp = --24a 23 57 23 57 23 57 --100 2 3 5 7 2 3 5 7 --1.0 --10 5 3 2 --0.1 it03353 operation in this area is limited by r ds (on). 0 0 20 40 60 10 5 80 100 120 20 15 25 140 160 it03355 0 20 40 60 80 100 120 140 160 it03354 tc=25 c single pulse i d = --6a v gs -- qg p d -- ta a s o total gate charge, qg -- nc gate-to-source voltage, v gs -- v ambient temperature, ta -- c allowable power dissipation, p d -- w p d -- tc case temperature, tc -- c allowable power dissipation, p d -- w drain-to-source voltage, v ds -- v drain current, i d -- a
|
