? semiconductor components industries, llc, 2003 august, 2003 ? rev. 0 1 publication order number: 2sa1734t2g/d 2sa1734t2g preferred device pnp silicon transistor the device is housed in the sot-89 package, which is designed for medium power surface mount applications. ? high current: 1.2 amp ? available in 7 inch/1000 unit tape and reel ? device marking: sa maximum ratings (t c = 25 c unless otherwise noted) rating symbol value unit collector-emitter voltage v ceo ?30 vdc collector-base voltage v cbo ?40 vdc emitter-base voltage v ebo ?6 vdc collector current i c ?1.2 adc total power dissipation @ t a = 25 c derate above 25 c p d (note 1) (note 2) 1.56 13 0.67 5.0 watts mw/ c watts mw/ c operating and storage temperature range t j , t stg ?65 to 150 c thermal characteristics characteristic symbol max unit thermal resistance junction-to-ambient (surface mounted) r ja (note 1) (note 2) 60 190 c/w maximum temperature for soldering purposes time in solder bath t l 260 10 c sec 1. fr?4 @ 1.0 x 1.0 inch pad 2.0 oz. cu pcb 2. fr?4 @ minimum pad device package shipping ordering information sot?89 case 1213 style 2 marking diagram sa y = year code m = month code sa = device code preferred devices are recommended choices for future use and best overall value. collector 2 base 1 emitter 3 medium power pnp silicon high current transistor surface mount 1 2 3 2sa1734t2g sot?89 1000/tape & reel ym http://onsemi.com
2sa1734t2g http://onsemi.com 2 electrical characteristics (t c = 25 c unless otherwise noted) characteristic symbol min typ max unit off characteristics collector ?emitter breakdown voltage (note 3) (i c = ?10 madc, i b = 0) v (br)ceo ?30 ? ? vdc collector cutoff current (v cb = ?40 vdc, i e = 0) i cbo ? ? ?0.1 adc emitter cutoff current (v eb = ?6.0 v, i c = 0) i ebo ? ? ?0.1 adc on characteristics (note 3) dc current gain (i c = ?100 ma, v ce = ?2.0 v) (i c = ?1.0 a, v ce = ?2.0 v) h fe 120 40 ? ? 400 ? ? collector ?emitter saturation voltage (i c = ?700 ma, i b = ?35 ma) v ce(sat) ? ? ?0.5 vdc base ?emitter saturation voltage (i c = ?700 ma, i b = ?35 ma) v be(sat) ? ? ?1.2 vdc small?signal characteristics current ?gain ? bandwidth product (note 4) (i c = ?100 madc, v ce = ?2.0 vdc, f = 100 mhz) f t ? 100 ? mhz collector output capacitance (v cb = ?10 vdc, i e = 0 madc, f = 1.0 mhz) c ob ? 16 ? pf 3. pulse test: pulse width 300 s, duty cycle = 2.0%. 4. f t is defined as the frequency at which |h fe | extrapolates to unity.
2sa1734t2g http://onsemi.com 3 i c , collector current (ma) -10 -20 -50 -100 -200 -500 h fe , dc current gain 250 0 25 50 75 100 125 200 175 150 225 -1.0 a -2.0 a -4.0 a v ce = -2.0 v t j = 125 c 25 c -55 c figure 1. typical dc current gain i c , collector current (ma) v, voltage (volts) 0 figure 2. on voltages -50 -2.0 -1.8 -1.6 -1.4 -1.2 -1.0 -0.4 -0.8 -0.6 -0.2 -100 -200 -500 -1.0 a -2.0 a v be(sat) @ i c /i b = 10 v ce(sat) @ i c /i b = 10 v be(on) @ v ce = 2.0 v -4.0 a -10 -4.0 -2.0 -1.0 -0.5 -0.2 -0.1 -0.02 -0.01 -1.0 -2.0 -5.0 -10 -20 -50 -100 1.0 ms t a = 25 c t c = 25 c wire limit thermal limit second breakdown limit -0.05 v ce , collector-emitter voltage (volts) i b , base current (ma) figure 3. collector saturation region v ce , collector-emitter voltage (volts) t j = 25 c i c = -10 ma i c = -100 ma i c = -500 ma i c = -2.0 a -0.05 -1.0 0 -0.1 -0.2 -0.3 -0.4 -0.5 -0.6 -0.7 -0.8 -0.9 -0.1 -0.2 -0.5 -1.0 -2.0 -5.0 -10 -20 -50 -100 -200 -500 figure 4. safe operating area
2sa1734t2g http://onsemi.com 4 package dimensions sot?89 (3?lead) case 1213?02 issue c k l g h m 0.10 t s b s a m 0.10 t s b s a d e 2 pl c j ?a? ?b? f ?t? seating plane notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeters 3. 1213-01 obsolete, new standard 1213-02. dim a min max min max inches 4.40 4.60 0.173 0.181 millimeters b 2.40 2.60 0.094 0.102 c 1.40 1.60 0.055 0.063 d 0.37 0.57 0.015 0.022 e 0.32 0.52 0.013 0.020 f 1.50 1.83 0.059 0.072 g 1.50 bsc 0.059 bsc h 3.00 bsc 0.118 bsc j 0.30 0.50 0.012 0.020 k 0.80 --- 0.031 --- l --- 4.25 --- 0.167 style 2: pin 1. base 2. collector 3. emitter on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and s pecifically disclaims any and all liability, including without limitation special, consequential or incidental damages. atypicalo parameters which may be provided in scillc data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. all operating parameters, including atypicalso must be validated for each customer application by customer's technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body , or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indem nify and hold scillc and its of ficers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and re asonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized u se, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employ er. publication ordering information japan : on semiconductor, japan customer focus center 2?9?1 kamimeguro, meguro?ku, tokyo, japan 153?0051 phone : 81?3?5773?3850 on semiconductor website : http://onsemi.com for additional information, please contact your local sales representative. 2sa1734t2g/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303?675?2175 or 800?344?3860 toll free usa/canada fax : 303?675?2176 or 800?344?3867 toll free usa/canada email : onlit@hibbertco.com n. american technical support : 800?282?9855 toll free usa/canada
|
