babt babt approved relay g6abs babt approved relay meeting the requirements of en41003:1993 as endorsed, formerly bs6301:1989 amendment 5 for supplementary isolation babt approved no. cr/0098. height of only 8mm from pcb. wide switching load 10 m a to 2a. fully sealed construction. ordering information single-side stable type model classification g6a234pbs contact form dpdt contact t ype bifurcated crossbar contact material agpd+au clad structure plastic sealed rated coil voltage note: when ordering, add the rated coil voltage to the model number . example: G6A-234P-BS 12 vdc specifications coil ratings general purpose, dpdt relays rated voltage (vdc) 3 4.5 5 6 9 12 24 48 rated current (ma) 93.8 62.5 56.2 46.5 31.1 23.3 11.7 7.0 coil resistance ( w ) 32 72 89 129 289 514 2,057 6,882 coil inductance armature off 0.07 0.16 0.2 0.29 0.63 1.1 4.5 13.7 (h) (ref. value) armature on 0.065 0.14 0.18 0.26 0.57 1.06 4.1 12.5 must operate voltage 70% max. of rated voltage must release voltage 10% min. of rated voltage max. voltage 150% of rated voltage at 23 c, 150% at 70 c power consumption approx. 280 mw approx. 330 mw contact ratings item G6A-234P-BS load resistive load (cos ? = 1) inductive load (cos ? = 0.4; l/r = 7 ms) rated load 0.3 a at 125 v ac; 1 a at 30 vdc 0.2 a at 125 v ac; 0.5 a at 30 vdc contact material agpd (au-clad) rated carry current 3 a max. switching voltage 250 v ac, 220 vdc max. switching current dc: 2a; ac: 2 a dc: 1 a; ac: 1 a max. switching capacity 125 v a, 60 w 62.5 v a, 30 w min. permissible load 0.01 ma at 10 mvdc
g6abs g6abs characteristics (at ambient temperature 23 c) contact resistance 50 m w max. operate (set) time 5 ms max. release (reset) time 3 ms max. max. operating frequency mechanical: 36,000 operations/hr electrical: 1,800 operations/hr (under rated load) insulation resistance 1,000 m w min. (at 500 vdc) dielectric withstand voltage 1,000 v ac, 50/60 hz for 1 min between open contacts 2,000 v ac, 50/60 hz for 1 min between coil and contacts impulse withstand voltage 1,500 v 10 x 160 m s (conforms to fcc part 68) v ibration resistance destruction: 10 to 55 hz, 5-mm double amplitude malfunction: 10 to 55 hz, 3.3-mm double amplitude shock resistance destruction: 1,000 m/s 2 (approx. 100g) malfunction: dpdt: 500 m/s 2 (approx. 50g) life expectancy mechanical: 100,000,000 operations min. (at 36,000 operations/hr) electrical: 500,000 operations min. (at 1,800 operations/hr) ambient temperature operating: 40 c to 70 c (with no icing) storage: 40 c to 70 c (with no icing) ambient humidity operating: 45% to 85% weight dpdt: approx. 3.5 g note: the data shown above are initial values. dimensions note: 1. orientation marks are indicated as follows: t erminal arrangement/ internal connections (bottom view) mounting holes (bottom view) t olerance: + 0.1 1 16 4 13 6 11 8 9 + 7.62 5.08 5.08 (1.2) 7.62 (1.2) (1.2) (1.2) eight, 1.0-dia. holes (20)* 20.2 max. (9.9)* 10.1 max. (8.2)* 8.4 max. 0.64 0.6 7.62 3.16 0.3 G6A-234P-BS
|
