www.tracopower.com page 1 features dc/dc converter tme series 1 watt single-in-line package (sip) i/o-isolation 1?000 vdc high efficiency up to 80% operating temperature ? 40c to +85c pin-compatible with other manufacturers 100% burn-in (8 h) 2 year product warranty the tme series is a range of sub-miniature , isolated dc/dc-con- verters in a sip-package, which requires only 0.7 cm 2 of board space. they provide a cost effective solution to generate supplemen- tary, isolated voltages. full smd-design and a 100 % production test of parameters ensure a high reliability of this product. models ordercode input voltage output voltage output current max. efficiency typ. tme 0505s 5 vdc 200 ma 70 % tme 0509s 9 vdc 110 ma 76 % tme 0512s 5 vdc 10% 12 vdc 80 ma 77 % tme 0515s 15 vdc 65 ma 78 % tme 1205s 5 vdc 200 ma 71 % tme 1509s 9 vdc 110 ma 77 % tme 1212s 12 vdc 10% 12 vdc 80 ma 79 % tme 1215s 15 vdc 65 ma 80 % tme 2405s 5 vdc 200 ma 70 % tme 2409s 9 vdc 110 ma 76 % tme 2412s 24 vdc 10% 12 vdc 80 ma 79 % tme 2415s 15 vdc 65 ma 79 %
www.tracopower.com page 2 all specifications valid at nominal input voltage, full load and +25c after warm-up time unless otherwise stated. input specifications input current no load /full load 5 vin models 30 ma / 290 ma typ. 12 vin models 15 ma / 120 ma typ. 24 vin models 10 ma / 60 ma typ. surge voltage (1 sec. max.) 5 vin models 9 v max. 12 vin models 18 v max. 24 vin models 30 v max. reverse voltage protection 0.3 a max. reflected input ripple current can be reduced by ext. 1?3.3 f polyester film capacitor input filter internal capacitors output specifications voltage set accuracy 3 % regulation ? input variation 1.2 % / 1 % change vin ? load variation 20 ? 100 % 10 % max. ripple and noise (20 mhz bandwidth) 150 mv pk-pk max. temperature coefficient 0.02 % / c short circuit protection limited 1 sec. max. capacitive load 33 f max. general specifications temperature ranges ? operating ? 40 c ... +85 c ? case temperature + 95 c max. ? storage ? 40 c ... +105 c humidity (non condensing) 95 % rel h max. reliability, calculated mtbf (mil-hdbk-217 e) >2?000?000 h @ 25 c isolation voltage input/output 1?000 vdc isolation capacity input/output 60 pf typ. isolation resistance input/output >1?000 mohm switching frequency 90 khz typ. (frequency modulation) frequency change over line and load 30 % max. dc/dc converter tme series 1 watt
page 3 specifications can be changed without notice outline dimensions mm (inches) jenatschstrasse 1 ch-8002 zurich switzerland tel. +41-1284 2911 fax +41-1201 1168 e - mail: sales @ traco.ch internet: http://www.tracopower.com dc/dc converter tme series 1 watt rev. 05/00 physical specifications case material non conductive black plastic (flammability to ul 94-v0) package weight 5 vin & 12 vin models 1.3 g (0.05 oz) 24 vin models 1.7 g (0.06 oz) soldering temperature max. 260 c / 10 sec pin-out pin single 1 ?vin (gnd) 2 +vin (vcc) 3 ?vout 4 +vout tolerances 0.25 (0.01) pins 0.05 (0.002) bottom view 2.54 11.5 (0.45) 2 1 0.5 1.9 2.54 34 6.0 ( 0.24) 24 v models 4.2 (0.17) 5.2 (0.2) 7. 0 (0.28) 0.25 (0.01) 0.5 (0.02) 3.2 (0.13) 0.5 (0.02) 2.54 1. 8 10.2 (0.4) (0.02) 0.5 (0.02) (0.1) (0.1) (0.1) (0.08 0.02 ) (0.07) 0.5
|
