View IE-703204-G1-EM1_2391795.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

user?s manual target devices v850es/sa2 v850es/sa3 IE-703204-G1-EM1 emulation board document no. u16622ej1v0um00 (1st edition) date published september 2003 n cp(k) printed in japan 2003
user?s manual u16622ej1v0um 2 [memo]
user?s manual u16622ej1v0um 3 windows is either a trademark or a registered trademark of microsoft corporation in the united states and/or other countries. pc/at is a trademark of international business machines corporation. the information in this document is current as of march, 2003. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec electronics data sheets or data books, etc., for the most up-to-date specifications of nec electronics products. not all products and/or types are available in every country. please check with an nec electronics sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without the prior written consent of nec electronics. nec electronics assumes no responsibility for any errors that may appear in this document. nec electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec electronics products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec electronics or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. nec electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec electronics endeavors to enhance the quality, reliability and safety of nec electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. nec electronics products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to nec electronics products developed based on a customer- designated "quality assurance program" for a specific application. the recommended applications of an nec electronics product depend on its quality grade, as indicated below. customers must check the quality grade of each nec electronics product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec electronics products is "standard" unless otherwise expressly specified in nec electronics data sheets or data books, etc. if customers wish to use nec electronics products in applications not intended by nec electronics, they must contact an nec electronics sales representative in advance to determine nec electronics' willingness to support a given application. (note) (1) "nec electronics" as used in this statement means nec electronics corporation and also includes its majority-owned subsidiaries. (2) "nec electronics products" means any product developed or manufactured by or for nec electronics (as defined above). ? ? ? ? ? ? m8e 02. 11-1
user ? s manual u16622ej1v0um 4 regional information ? device availability ? ordering information ? product release schedule ? availability of related technical literature ? development environment specifications (for example, specifications for third-party tools and components, host computers, power plugs, ac supply voltages, and so forth) ? network requirements in addition, trademarks, registered trademarks, export restrictions, and other legal issues may also vary from country to country. [global support] http://www.necel.com/en/support/support.html nec electronics america, inc. (u.s.) santa clara, california tel: 408-588-6000 800-366-9782 nec electronics hong kong ltd. hong kong tel: 2886-9318 nec electronics hong kong ltd. seoul branch seoul, korea tel: 02-558-3737 nec electronics shanghai, ltd. shanghai, p.r. china tel: 021-6841-1138 nec electronics taiwan ltd. taipei, taiwan tel: 02-2719-2377 nec electronics singapore pte. ltd. novena square, singapore tel: 6253-8311 j03.4 n ec electronics (europe) gmbh duesseldorf, germany tel: 0211-65 03 01 sucursal en espa ? a madrid, spain tel: 091-504 27 87 v lizy-villacoublay, france tel: 01-30-67 58 00 succursale fran ? aise filiale italiana milano, italy tel: 02-66 75 41 branch the netherlands eindhoven, the netherlands tel: 040-244 58 45 tyskland filial taeby, sweden tel: 08-63 80 820 united kingdom branch milton keynes, uk tel: 01908-691-133 some information contained in this document may vary from country to country. before using any nec electronics product in your application, piease contact the nec electronics office in your country to obtain a list of authorized representatives and distributors. they will verify:
user?s manual u16622ej1v0um 5 introduction target readers this manual is intended for users who design and develop application systems using the v850es/sa2 and v850es/sa3 microcontrollers. purpose the purpose of this manual is to describe the basic specifications of the ie- 703204-g1-em1 and its proper operation. organization this manual is broadly divided into the following parts. outline cautions part names and functions restrictions setup procedure how to read this manual it is assumed that the reader of this manual has general knowledge in the fields of electrical engineering, logic circuits, and microcontrollers. use the IE-703204-G1-EM1 connected to the in-circuit emulator (ie-v850es-g1). this manual describes the basic setup procedures and switch settings of the IE-703204-G1-EM1 and ie-v850es-g1. for the part names, functions, and configuration parts of the ie-v850es-g1, refer to the ie-v850es-g1 user?s manual (u16313e) provided separately. to learn about the basic specifications and operation read this manual in the order listed in contents . to learn software settings such as the operation methods, command functions, etc., of the ie-v850es-g1 or IE-703204-G1-EM1 read the user?s manual of the debugger (sold separately) that is used. conventions note : footnote for item marked with note in the text caution : information requiring particular attention remark : supplementary information numeral representation: binary ? or b decimal ... hexadecimal ... h prefix representing a power of 2 (address space, memory capacity): k (kilo): 2 10 = 1024 m (mega): 2 20 = 1024 2 terminology the meanings of terms used in this manual are listed below. target device this is the device to be emulated. target system the system (user-built system) to be debugged. this includes the target program and hardware configured by the user. emulation cpu the cpu that executes the program created by the user in the emulator.

(
/, b

4
'
5

6
(
'?4 3
' /,
+ , ' &

* >
; >
;
( )*!"#*-5) *0

!"#6 && )*+&,*-*5
<!"#$#%4!"#$#%&6
!"#$#%4!"#$#%&? "c" / "& 0d
", 0%!"''"0013 %( d
, 11
'"' ""c )>!"''") >(
/ b ( + #!"''"# #
/ b ( ! #!"''d# #
9 1/ ) # ,!+& < &,& ) &, 2e!"'&'&d52*/#6 &,& < &++& ) &++, 2e!"1'&'&52*/#6 &++ 2>!"'&'3>(
&+&+ 2>!"1'&'3>(
&c %f!"'&'# 1 % g ,, 1-*71,7 1 "

/,
0+
01 //
/ 2 3
+ 4
//, 2
user?s manual u16622ej1v0um 7 contents chapter 1 outline ............................................................................................................. ...........10 1.1 product configuration ....................................................................................................... ....11 1.2 features (when connected to ie-v850es-g1) ....................................................................12 1.3 function specifications (when connected to ie-v850es-g1) ..........................................13 1.4 system configuration....................................................................................................... .....14 1.5 contents in carton......................................................................................................... ........16 chapter 2 part names and functions..................................................................................17 2.1 part names and functions of IE-703204-G1-EM1 ...............................................................17 2.2 leds controlled by IE-703204-G1-EM1................................................................................19 chapter 3 setup procedure ....................................................................................................2 0 3.1 connecting ie-v850es-g1 and IE-703204-G1-EM1 with probe .........................................20 3.2 replacing resonator ......................................................................................................... ....23 chapter 4 cautions ............................................................................................................ .........24 4.1 connection with target system ...........................................................................................24 4.2 characteristics of target interface.......................................................................................24 chapter 5 restrictions ........................................................................................................ .....34 5.1 clock generator ............................................................................................................. ........34 5.2 timing of setting/releasing standby mode ........................................................................34 5.3 dma ......................................................................................................................... ................34 5.4 operation during break...................................................................................................... ...34 appendix a package drawings................................................................................................35
user?s manual u16622ej1v0um 8 list of figures figure no. title page 1-1 system configuration ........................................................................................................ ...........................14 1-2 contents in carton .......................................................................................................... .............................16 2-1 part names of IE-703204-G1-EM1 .............................................................................................. ................17 2-2 leds controlled by IE-703204-G1-EM1 ......................................................................................... .............19 4-1 equivalent circuit a ........................................................................................................ ..............................24 4-2 equivalent circuit b ........................................................................................................ ..............................24 4-3 equivalent circuit c........................................................................................................ ..............................25 4-4 equivalent circuit d........................................................................................................ ..............................25 4-5 equivalent circuit e ........................................................................................................ ..............................25 4-6 equivalent circuit f ........................................................................................................ ..............................25 4-7 equivalent circuit g........................................................................................................ ..............................26 4-8 equivalent circuit h........................................................................................................ ..............................26 4-9 equivalent circuit i ........................................................................................................ ...............................26 4-10 equivalent circuit j....................................................................................................... ................................26 4-11 equivalent circuit k ....................................................................................................... ...............................27 4-12 equivalent circuit l ....................................................................................................... ...............................27
user?s manual u16622ej1v0um 9 list of tables figure no. title page 4-1 pin correspondence list (v850es/sa2 pin names) .............................................................................. .....28 4-2 pin correspondence list (v850es/sa3 pin names) .............................................................................. .....31
user?s manual u16622ej1v0um 10 chapter 1 outline the IE-703204-G1-EM1 is an emulation board for the ie-v850es-g1 in-circuit emulator. connected to the ie-v850es-g1, the IE-703204-G1-EM1 can be used for efficient hardware and software debugging during system development using the v850es/sa2 and v850es/sa3. this manual describes the basic setup procedure and the switch settings of the ie-v850es-g1 when connected to the IE-703204-G1-EM1. for the part names and functions of the ie-v850es-g1, refer to the separate ie-v850es-g1 user?s manual (u16313e) .
chapter 1 outline user?s manual u16622ej1v0um 11 1.1 product configuration in-circuit emulator (ie-v850es-g1) emulation board (IE-703204-G1-EM1) the ie-v850es-g1 can be used as an in-circuit emulator for the v850es/sa2 and v850es/sa3 by installing the IE-703204-G1-EM1 board. pc interface board ie-70000-pci-if(-a) ie-70000-cd-if-a this is a board for connecting the ie-v850es-g1 to a pc. more than one such board can be installed using the pc , s expansion slots. ie-70000-pci-if(-a): for pci bus ie-70000-cd-if-a: for pcmcia socket swex-100sd-1 swex-120se-1 general-purpose probes made by tokyo eletech corporation separately-sold products sockets separately-sold products
chapter 1 outline user?s manual u16622ej1v0um 12 1.2 features (when connected to ie-v850es-g1) ? maximum operating frequency: 20 mhz (2.2 v to 2.7 v) ? the following pins can be masked. nmi, wait, reset, hldrq ? the external dimensions of the IE-703204-G1-EM1 are listed below item value height 35 mm width 205 mm external dimensions depth 140 mm
chapter 1 outline user ? s manual u16622ej1v0um 13 1.3 function specifications (when connected to ie-v850es-g1) item specification internal rom 1 mb emulation memory capacity for user memory 4 mb internal rom 256 kb execution/pass detection coverage memory capacity external memory 1 mb memory access detection coverage memory capacity external memory 1 mb internal rom 256 kb branch destination entry count calculation coverage memory capacity external memory 1 mb trace memory capacity 168 bits 32 k frames time measurement function internal timers 3 8-bit external trace possible external logic probe trace/break event setting possible event break step execution break forced break break function fail-safe break ? illegal access to peripheral i/o ? access to guard area ? write to rom area caution some functions may not be supported depending on the debugger that is used.
chapter 1 outline user?s manual u16622ej1v0um 14 1.4 system configuration the system configuration when using the IE-703204-G1-EM1 connected to the ie-v850es-g1, which itself is connected to a pc (pc-9800 series or pc/at tm compatible) is shown below. figure 1-1. system configuration <5> <4> <3> <1> <2> <15> <6> target connector connection example (enlarged view) target system target system <12> <13> <9> <10> <11> <7> <8> <14> <14> remarks <1>: pc (pc-9800 series or pc/at compatible) <2>: debugger (sold separately), device file (obtained separately) note 1 <3>: pc interface board (ie-70000-pci-if(-a), ie-70000-cd-if-a: sold separately) <4>: pc interface cable (supplied with ie-v850es-g1: sold separately) <5>: ie-v850es-g1 (sold separately) <6>: emulation board (this product) <7>: probe note 2 (swex-120se-1: sold separately) <8>: probe note 2 (swex-100sd-1: sold separately) <9>: csice121a1312n03 note 2 (sold separately) <10>: lspack121a1312n01 note 2 (sold separately) <11>: cssocket121a1312n01 note 2 (sold separately) or cssocket121a1312n01n note 2 (sold separately) (cssocket121a1312n01s1 note 2 (sold separately) can be used for stacking.) cssocket121a1312n01n is a type with no guide pins. <12>: yqpack100sd note 2 (supplied with this product)
chapter 1 outline user?s manual u16622ej1v0um 15 <13>: nqpack100sd note 2 (supplied with this product) <14>: yqguide note 2 (supplied with this product) <15>: power supply cable (supplied with ie-v850-g1: sold separately) notes 1. the device file can be downloaded from the nec electronics website. (url: http://www.necel.com/micro) 2. these are products of tokyo eletech corporation. for further information, contact daimaru kogyo co., ltd. tokyo electronics department (tel: +81-3-3820-7112) osaka electronics department (tel: +81-6-6244-6672)
chapter 1 outline user ? s manual u16622ej1v0um 16 1.5 contents in carton the IE-703204-G1-EM1 package contains the IE-703204-G1-EM1 emulation board, a guarantee card, a packing list, this manual, and an accessory bag. check whether the accessory bag contains the items listed below. if you find any missing or damaged items, contact an nec electronics sales representative or distributor. figure 1-2. contents in carton <3> guaranteed card <4> packing list <1> IE-703204-G1-EM1 <2> accessory bag <1> IE-703204-G1-EM1 1 <2> accessory bag 1 <3> guarantee card 1 <4> packing list 1 check whether the accessory bag contains the following items in addition to this manual and the packing list ( 1). (a) 7-pin header (for resonator replacement): 1 (b) nqpack100sd (for mounting board): 1 yqpack100sd (for mounting probe): 1 hqpack100sd (for mounting ic): 1 yq-guide (guide pin): 4 (c) screws/washers: 6 sets (6 screws + 6 washers are included)
user?s manual u16622ej1v0um 17 chapter 2 part names and functions this chapter describes the part names and functions of the IE-703204-G1-EM1. for the part names and functions of the ie-v850es-g1, refer to the ie-v850es-g1 user?s manual (u16313e) . 2.1 part names and functions of IE-703204-G1-EM1 figure 2-1. part names of IE-703204-G1-EM1 (1) socket for connecting swex-100sd-1 (4) osc2 (subclock) (3) osc1 (main clock) 1 1 (2) socket for connecting swex-120se-1
chapter 2 part names and functions user ? s manual u16622ej1v0um 18 (1) socket for connecting swex-100sd-1 connect the swex-100sd-1 when using the IE-703204-G1-EM1 as the emulator of the v850es/sa2. (2) socket for connecting swex-120se-1 connect the swex-120se-1 when using the IE-703204-G1-EM1 as the emulator of the v850es/sa3. (3) osc1 (main clock) this is the socket in which the resonator that generates the main clock is mounted. use this socket when replacing the resonator for the main clock. for details, refer to 3.2 resonator replacement . (4) osc2 (subclock) this is the socket in which the resonator that generates the subclock is mounted. the frequency of the subclock is fixed to 32.768 khz, so the resonator for subclock cannot be replaced.
chapter 2 part names and functions user ? s manual u16622ej1v0um 19 2.2 leds controlled by IE-703204-G1-EM1 some of the leds mounted in the ie-v850es-g1 are controlled by the IE-703204-G1-EM1. for the leds that are controlled by the ie-v850es-g1, refer to the ie-v850es-g1 user?s manual (u16313e) . figure 2-2. leds controlled by IE-703204-G1-EM1 power reset led target v dd supply voltage <1> target target v dd supply voltage <2> (1) reset led the status of the reset signal connected to the target system is indicated as follows. lit (on): the target system is connected and the reset signal is active (gnd level). unlit (off): either the target system is not connected, or the reset signal is inactive (v dd level). (2) target v dd supply voltage <1> the status of the v dd signal connected to the target system is indicated as follows. (this led indicates the status of pin 11 during v850es/sa2 emulation, and the status of the f3 pin during v850es/sa3 emulation.) lit (on): the target system is connected, and voltage is being applied to the v dd pin. unlit (off): either the target system is not connected, or voltage is not being applied to the v dd pin. (3) target v dd supply voltage <2> the status of the v dd signal connected to the target system is indicated as follows. (this led indicates the status of pin 19 during v850es/sa2 emulation, and the status of the h2 pin during v850es/sa3 emulation.) lit (on): the target system is connected and voltage is being applied to the v dd pin. unlit (off): either the target system is not connected, or voltage is not being applied to the v dd pin.
user?s manual u16622ej1v0um 20 chapter 3 setup procedure this chapter describes how to connect the IE-703204-G1-EM1 to related products and how to replace the resonator. 3.1 connecting ie-v850es-g1 and IE-703204-G1-EM1 with probe the following shows the procedure to connect the ie-v850es-g1 and IE-703204-G1-EM1 with the probe. <1> pull off the front cover of the ie-v850es-g1. <2> raise the frame of the ie-v850es-g1 as shown.
chapter 3 setup procedure user?s manual u16622ej1v0um 21 <3> with the main board and the IE-703204-G1-EM1 aligned as shown, insert three connectors on each side. at this time align the board so that the socket (yqsocket) to connect the prove faces towards the probe exit side. insert the probe (swex-100sd-1 or swex-120se-1) in the socket corresponding to the target device (refer to the following figure). socket to connect swex-120se-1 (for v850es/sa3) socket to connect swex-100sd-1 (for v850es/sa2)
chapter 3 setup procedure user?s manual u16622ej1v0um 22 <4> slowly lower the frame of the ie-v850es-g1. <5> replace the front cover of the ie-v850es-g1.
chapter 3 setup procedure user?s manual u16622ej1v0um 23 3.2 replacing resonator the IE-703204-G1-EM1 does not support clock oscillation by the resonator on the target system. therefore, to change the main clock frequency, replace the resonator mounted in osc1 (main clock) on the IE-703204-G1-EM1 with a resonator with the desired frequency. after shipment, the following oscillators are mounted as oscillators for generating each clock. item setting osc1 (main clock) 20 mhz oscillator osc2 (subclock) 32.768 khz oscillator to change the main clock frequency, mount the resonator and capacitor on the included 7-pin header as shown and substitute it for the 7-pin header already mounted on osc1 (main clock). 1234567 7-pin header open 1234567 7-pin socket open pd70f3204y (emulation cpu) x1 x2 osc1 (main clock) the frequency of the subclock is fixed to 32.768 khz, so the resonator for the subclock cannot be replaced. the IE-703204-G1-EM1 does not support clock oscillation by the resonator on the target system. therefore, operation between the resonator on the target system and the oscillator in the target device cannot be emulated using the ie- 703204-g1-em1.
user?s manual u16622ej1v0um 24 chapter 4 cautions the following must be observed when using the IE-703204-G1-EM1. 4.1 connection with target system turn off power to the ie-v850es-g1 before connecting the IE-703204-G1-EM1 to the target system. 4.2 characteristics of target interface the target interface (signals connecting the in-circuit emulator and the target system) functionally operates as if an actual device is connected, however, the characteristics may be different than those of the actual device. the target interface of the IE-703204-G1-EM1 is one of those shown in figures 4-1 to 4-12. the target interface processing of each target device is shown in tables 4-1 and 4-2. figure 4-1. equivalent circuit a pd70f3204y emulation cpu port pin target system side ie system side figure 4-2. equivalent circuit b ep1k100fc484 (fpga) p174avc16245 (voltage level shifter) ab 3.6 v same potential as v dd target system side ie system side vccb vcca
chapter 4 cautions user ? s manual u16622ej1v0um 25 figure 4-3. equivalent circuit c ep1k100fc484 (fpga) pd70f3204y emulation cpu port pin target system side ie system side p174avc16245 (voltage level shifter) ab 3.6 v same potential as v dd vccb vcca figure 4-4. equivalent circuit d pc393g2 (comparator) 10 k ? user reset pin target system side ie system side p174avc16245 (voltage level shifter) ab 3.6 v same potential as v dd same potential as v dd vccb vcca figure 4-5. equivalent circuit e pd70f3204y emulation cpu av ref0 av ref1 g6h-2f (relay) note target system side ie system side p174avc16245 (voltage level shifter) ab 3.6 v same potential as v dd vccb vcca note conducts only when the target system is connected. figure 4-6. equivalent circuit f pc393g2 (comparator) 1 m ? 100 ? ii- target system side ie system side
chapter 4 cautions user ? s manual u16622ej1v0um 26 figure 4-7. equivalent circuit g pd70f3204y emulation cpu av ref0 av ref1 g6h-2f (relay) note target system side ie system side p174avc16245 (voltage level shifter) ab 3.6 v same potential as v dd vccb vcca note conducts only when the target system is connected. figure 4-8. equivalent circuit h ep1k100fc484 (fpga) 1 m ? ii- target system side ie system side p174avc16245 (voltage level shifter) ab 3.6 v same potential as v dd vccb vcca figure 4-9. equivalent circuit i target system side av dd ie system side pd70f3204y emulation cpu av dd ev dd ev dd open open n.c. same potential as v dd open figure 4-10. equivalent circuit j ie system side target system side n.c. open pd70f3204y emulation cpu n.c. open
chapter 4 cautions user ? s manual u16622ej1v0um 27 figure 4-11. equivalent circuit k target system side av ss ie system side pd70f3204y emulation cpu av ss v ss ev ss v ss ev ss figure 4-12. equivalent circuit l ie system side target system side x2 x1 open open xt2 xt1 open open pd70f3204 emulation cpu xt1 xt2 1 27 pf 7 1 7 27 pf 32.768 khz x1 x2 1 m ?
chapter 4 cautions user ? s manual u16622ej1v0um 28 table 4-1. pin correspondence list (v850es/sa2 pin names) (1/3) v850es/sa2 pin no. target interface name (v850es/sa2 pin names) processing in in-circuit emulator 1av ref0 emulation circuit e 2av dd emulation circuit i 3av ss emulation circuit k 4 p80/ano0 emulation circuit a 5 p81/ano1 emulation circuit a 6av ref1 emulation circuit e 7 p00/nmi emulation circuit a 8 p30/si1/rxd0 emulation circuit a 9 p31/so1/txd0 emulation circuit a 10 p32/sck1 emulation circuit a 11 v dd emulation circuit a 12 v ss emulation circuit k 13 x1 emulation circuit l 14 x2 emulation circuit l 15 reset emulation circuit d 16 xt1 emulation circuit l 17 xt2 emulation circuit l 18 v dd emulation circuit g 19 v ss emulation circuit k 20 p90/a0 emulation circuit c 21 p91/a1 emulation circuit c 22 p92/a2/intp5 emulation circuit c 23 p93/a3/intp6 emulation circuit c 24 p94/a4/to2 emulation circuit c 25 p95/a5/to3 emulation circuit c 26 p96/a6/to4 emulation circuit c 27 p97/a7/to5 emulation circuit c 28 p98/a8/rxd1 emulation circuit c 29 p99/a9/txd1 emulation circuit c 30 p910/a10/si2 emulation circuit c 31 p911/a11/so2 emulation circuit c 32 p912/a12/sck2 emulation circuit c 33 p913/a13/si3 emulation circuit c 34 p914/a14/so3 emulation circuit c 35 p915/a15/sck3 emulation circuit c 36 ev ss emulation circuit k 37 ev dd emulation circuit i 38 pcs0/cs0 emulation circuit b 39 pcs1/cs1 emulation circuit b 40 pcs2/cs2 emulation circuit b
chapter 4 cautions user?s manual u16622ej1v0um 29 table 4-1. pin correspondence list (v850es/sa2 pin names) (2/3) v850es/sa2 pin no. target interface name (v850es/sa2 pin names) processing in in-circuit emulator 41 pcs3/cs3 emulation circuit b 42 pcm0/wait emulation circuit b 43 pcm1/clkout emulation circuit b 44 pcm2/hldak emulation circuit b 45 pcm3/hldrq emulation circuit b 46 pct0/wr0 emulation circuit b 47 pct1/wr1 emulation circuit b 48 pct4/rd emulation circuit b 49 pct5 emulation circuit b 50 pct6/astb emulation circuit b 51 pct7 emulation circuit b 52 pdl0/ad0 emulation circuit b 53 pdl1/ad1 emulation circuit b 54 pdl2/ad2 emulation circuit b 55 pdl3/ad3 emulation circuit b 56 pdl4/ad4 emulation circuit b 57 pdl5/ad5/flmd1 emulation circuit b 58 pdl6/ad6 emulation circuit b 59 pdl7/ad7 emulation circuit b 60 pdl8/ad8 emulation circuit b 61 pdl9/ad9 emulation circuit b 62 ic/flmd0 emulation circuit b 63 ev ss emulation circuit k 64 ev dd emulation circuit i 65 pdl10/ad10 emulation circuit b 66 pdl11/ad11 emulation circuit b 67 pdl12/ad12 emulation circuit b 68 pdl13/ad13 emulation circuit b 69 pdl14/ad14 emulation circuit b 70 pdl15/ad15 emulation circuit b 71 pdh0/a16 emulation circuit b 72 pdh1/a17 emulation circuit b 73 pdh2/a18 emulation circuit b 74 pdh3/a19 emulation circuit b 75 pdh4/a20 emulation circuit b 76 pdh5/a21 emulation circuit b 77 p40/si0 emulation circuit a 78 p41/so0/sda emulation circuit a 79 p42/sck0/scl emulation circuit a 80 p43/intp00/ti0/tclr0 emulation circuit a
chapter 4 cautions user?s manual u16622ej1v0um 30 table 4-1. pin correspondence list (v850es/sa2 pin names) (3/3) v850es/sa2 pin no. target interface name (v850es/sa2 pin names) processing in in-circuit emulator 81 p44/intp01/to0 emulation circuit a 82 p45/intp10/ti1/tclr1 emulation circuit a 83 p46/intp11/to1 emulation circuit a 84 p01/intp0/ti2 emulation circuit a 85 p02/intp1/ti3 emulation circuit a 86 p03/intp2/ti4 emulation circuit a 87 p04/intp3/ti5 emulation circuit a 88 p05/intp4 emulation circuit a 89 p711/ani11 emulation circuit a 90 p710/ani10 emulation circuit a 91 p79/ani9 emulation circuit a 92 p78/ani8 emulation circuit a 93 p77/ani7 emulation circuit a 94 p76/ani6 emulation circuit a 95 p75/ani5 emulation circuit a 96 p74/ani4 emulation circuit a 97 p73/ani3 emulation circuit a 98 p72/ani2 emulation circuit a 99 p71/ani1 emulation circuit a 100 p70/ani0 emulation circuit a
chapter 4 cautions user?s manual u16622ej1v0um 31 table 4-2. pin correspondence list (v850es/sa3 pin names) (1/3) v850es/sa3 pin no. target interface name (v850es/sa3 pin names) processing in in-circuit emulator a1 p70/ani0 emulation circuit a a2 p71/ani1 emulation circuit a a3 p73/ani3 emulation circuit a a4 p713/ani13 emulation circuit a a5 p76/ani6 emulation circuit a a6 p78/ani8 emulation circuit a a7 p711/ani11 emulation circuit a a8 p04/intp3/ti5 emulation circuit a a9 pcd2 emulation circuit b a10 p45/intp10/ti1/tclr1 emulation circuit a a11 p43/intp00/ti0/tclr0 emulation circuit a a12 p41/so0/sda emulation circuit a a13 pdh5/a21 emulation circuit b b1 av dd emulation circuit i b2 av ref0 emulation circuit e b3 p72/ani2 emulation circuit a b4 p712/ani12 emulation circuit a b5 p75/ani5 emulation circuit a b6 p77/ani7 emulation circuit a b7 p710/ani10 emulation circuit a b8 pcd3 emulation circuit b b9 p02/intp1/ti3 emulation circuit a b10 p46/intp11/to1 emulation circuit a b11 p42/sck0/scl emulation circuit a b12 p40/si0 emulation circuit a b13 pdh4/a20 emulation circuit b c1 p80/ano0 emulation circuit a c2 av ss emulation circuit k c3 p74/ani4 emulation circuit a c4 p714/ani14 emulation circuit a c5 p715/ani15 emulation circuit a c6 p79/ani9 emulation circuit a c7 p05/intp4[/adtrg] emulation circuit a c8 p03/intp2/ti4 emulation circuit a c9 pcd1 emulation circuit b c10 p01/intp0/ti2 emulation circuit a c11 p44/intp01/to0 emulation circuit a c12 pdh3/a19 emulation circuit b c13 pdh7/a23 emulation circuit h d1 p81/ano1 emulation circuit a d2 av ref1 emulation circuit e
chapter 4 cautions user?s manual u16622ej1v0um 32 table 4-2. pin correspondence list (v850es/sa3 pin names) (2/3) v850es/sa3 pin no. target interface name (v850es/sa3 pin names) processing in in-circuit emulator d3 p00/nmi emulation circuit a d4 n.c. emulation circuit j d11 pdh0/a16 emulation circuit b d12 pdh2/a18 emulation circuit b d13 pdh1/a17 emulation circuit b e1 p30/si1/rxd0 emulation circuit a e2 p31/so1/txd0 emulation circuit a e3 p32/sck1 emulation circuit a e11 pdl14/ad14 emulation circuit b e12 pdh6/a22 emulation circuit h e13 pdl15/ad15 emulation circuit b f1 v ss emulation circuit k f2 x1 emulation circuit l f3 v dd emulation circuit f f11 pdl11/ad11 emulation circuit b f12 pdl13/ad13 emulation circuit b f13 pdl12/ad12 emulation circuit b g1 reset emulation circuit d g2 xt1 emulation circuit l g3 x2 emulation circuit l g11 ev ss emulation circuit k g12 pdl10/ad10 emulation circuit b g13 ev dd emulation circuit i h1 v ss emulation circuit k h2 v dd emulation circuit g h3 xt2 emulation circuit l h11 pdl8/ad8 emulation circuit b h12 mode/flmd0 emulation circuit b h13 pdl9/ad9 emulation circuit b j1 p20/si4 emulation circuit a j2 p91/a1 emulation circuit c j3 p90/a0 emulation circuit c j11 pdl5/ad5/flmd1 emulation circuit b j12 pdl7/ad7 emulation circuit b j13 pdl6/ad6 emulation circuit b k1 p22/sck4 emulation circuit a k2 p92/a2/intp5 emulation circuit c k3 p21/so4 emulation circuit a k11 pcm1/clkout emulation circuit b k12 pdl4/ad4 emulation circuit b
chapter 4 cautions user?s manual u16622ej1v0um 33 table 4-2. pin correspondence list (v850es/sa3 pin names) (3/3) v850es/sa3 pin no. target interface name (v850es/sa3 pin names) processing in in-circuit emulator k13 pdl3/ad3 emulation circuit b l1 p93/a3/intp6 emulation circuit c l2 p94/a4/to2 emulation circuit c l3 p911/a11/so2 emulation circuit c l4 p914/a14/so3 emulation circuit c l5 p915/a15/sck3 emulation circuit c l6 ev dd emulation circuit i l7 pcs0/cs0 emulation circuit b l8 pcs2/cs2 emulation circuit b l9 pcm4 emulation circuit h l10 pct2 emulation circuit h l11 pct0/wr0 emulation circuit b l12 pdl1/ad1 emulation circuit b l13 pdl2/ad2 emulation circuit b m1 p95/a5/to3 emulation circuit c m2 p97/a7/to5 emulation circuit c m3 p99/a9/txd1 emulation circuit c m4 p913/a13/si3 emulation circuit c m5 ev ss emulation circuit k m6 pcs5 emulation circuit h m7 pcs4 emulation circuit h m8 pcm0/wait emulation circuit b m9 pcm2/hldak emulation circuit b m10 pct3 emulation circuit h m11 pct4/rd emulation circuit b m12 pct7 emulation circuit b m13 pdl0/ad0 emulation circuit b n1 p96/a6/to4 emulation circuit c n2 p98/a8/rxd1 emulation circuit c n3 p910/a10/si2 emulation circuit c n4 p912/a12/sck2 emulation circuit c n5 pcs7 emulation circuit h n6 pcs6 emulation circuit h n7 pcs1/cs1 emulation circuit b n8 pcs3/cs3 emulation circuit b n9 pcm5 emulation circuit h n10 pcm3/hldrq emulation circuit b n11 pct1/wr1 emulation circuit b n12 pct5 emulation circuit b n13 pct6/astb emulation circuit b
user?s manual u16622ej1v0um 34 chapter 5 restrictions the IE-703204-G1-EM1 has the following restrictions. 5.1 clock generator (1) resonator to be connected oscillation by the resonator on the target system is not supported. therefore, clock oscillation operation on the target system cannot be emulated with the in-circuit emulator. (2) emulation of oscillation stabilization time after reset has been released in the target device for emulation, oscillation stabilization time is inserted after reset has been released; however, it is not inserted in the in-circuit emulator. (3) operation clock after reset in the target device for emulation, the operation clock after reset is f xx /8; however, there may be a period in which the clock is not initialized to f xx /8 with the in-circuit emulator (depending on the timing of reset release). 5.2 timing of setting/releasing standby mode the timing of setting/releasing the standby mode is different between the target device and the in-circuit emulator. the difference is within 1 clock when standby mode is set, and 2 or 3 clocks when it is released. 5.3 dma the status of the dchc0 to dchc3 registers of the dma function vary when read; however, these registers cannot be displayed by the i/o register browser of the debugger. 5.4 operation during break in the in-circuit emulator, peripheral functions operate during a break, so there may be a difference between the operations of the in-circuit emulator and target device. (however, while the in-circuit emulator is in the break status, the counter of the watchdog timer stops.)
user?s manual u16622ej1v0um 35 appendix a package drawings (1) nqpack100sd (unit: mm) top view c 1.5 21.0 14.0 2.5 2.5 0.5 x 24 = 12.0 5.8 0.3 slit width 3 ? r2.2 0.5 + 0.1 ? 0 16.6 13.0 20.2 5.8 3 ? 1.0 side view 0.18 15.0 0.5 0.5 0.2 1.85 5.1 5.5 1.2 3.7 9.45 3.9 1.85 bottom view 17.0 9.0 0.2 slit width 15.0 16.0 14.0 4 ? 2.0 projection height 1.8 remark nqpack100sd is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 36 (2) yqpack100sd (unit: mm) top view 3 ? 1.0 4 ?r 3.2 4 ? 2.2 4 ?r 2.2 13.4 21.0 23.0 16.6 10.9 13.3 15.7 18.1 0.5 x 24 = 12.0 5.8 0.5 5.8 side view 0.25 0.4 7.4 3.1 2.3 1.2 3.9 3.1 2.2 3.7 9.0 2.5 0.25 x 0.3 0.3 bottom view 13.4 15.3 16.1 14.1 0.2 17.3 c 1.5 remark yqpack100sd is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 37 (3) hqpack100sd (unit: mm) top view 3 1.0 r 3.2 4 2.2 r 2.2 13.4 21.0 23.0 16.6 0.5 x 24 = 12.0 5.8 0.5 5.8 side view 0.23 0.58 7.4 3.1 2.3 1.2 3.9 1.6 2.15 bottom view 13.4 15.12 17.1 14.1 0.2 17.3 c 1.5 remark hqpack100sd is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 38 (4) csice121a1312n03 (unit: mm) top view 0.4 0.4x29=11.6 16.6 23 0.4 0.4x29=11.6 12.1 14.7 17.3 19.9 pin 1 side 4- 2.2 3.3 part hole c2 side view (4) 1.03 2.4 3.9 0.8 (8.1) 0.32 bottom view a n 1 13 made in japan tet csice121a1312n03 csi-pwb-121a1312n01 resist diameter : 0.5 121-land diameter : 0.5 0.8 0.8x12=9.6 0.8 0.8x12=9.6 4.3 remark csice121a1312n03 is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 39 (5) lspack121a1312n01 (unit: mm) top view 29 22.65 0.8 0.8x12 = 9.6 0.8 0.8x12 = 9.6 tet made in japan lspack121a side view 1.65 6.7 1 bottom view remark lspack121a1312n01 is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 40 (6) cssocket121a1312n01 (unit: mm) top view 0.8 4 0.8x12=9.6 c1 pin 1 side 0.8 9.6 0.8x12=9.6 4 12 side view 3 4.2 2.5 8.1 1.2 0.65 0.25 0.7 remark cssocket121a1312n01 is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 41 (7) cssocket121a1312n01n (unit: mm) top view 0.8 4 0.8x12=9.6 c1 pin 1 side 0.8 9.6 0.8x12=9.6 4 12 side view 3 4.2 1.2 0.65 0.25 remark cssocket121a1312n01n is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 42 (8) cssocket121a1312n01s1 (unit: mm) top view 0.8 4 0.8x12=9.6 c1 pin 1 side 0.8 9.6 0.8x12=9.6 4 12 side view 3 4.2 1.2 0.65 0.25 remark cssocket121a1312n01s1 is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 43 (9) cssocket121a1312n01 (foot pattern) (unit: mm) 3- 0.80.05 through hole: finished diameter 0.8 0.8 external dimensions of lspack 4 4 121-pad diameter: 4 pin 1 side c1 0.8x12=9.6 external dimensions of cssocket 12 23 0.8x12=9.6 remarks 1. after cssocket has been fixed on the board by soldering, it is recommended to solder the guide pin of the connector from the lower side of the board or to fix the portion around the connector with resin for reinforcement. 2. the soldering reflow conditions are the same as for the cspack. remark cssocket121a1312n01 is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 44 (10) swex-100sd-1 (unit: mm) top view tet japan (295 8) (48) (48) (38.5) (38.5) ( 6) (13.1) (19.5) 6.4 (20) (13.1) (19.5) (20) ground wire tet cn2 cn4 fg sg fg sg fg sg fg sg 1 25 50 51 75 76 (5) (45) black red 26 cn1 cn3 target 100 ic1 f swex-100sd1 made in japan swex-100sd-e2 remark swex-100sd-1 is a product of tokyo eletech corporation.
appendix a package drawings user?s manual u16622ej1v0um 45 (11) swex-120se-1 (unit: mm) top view tet japan (55.5) (47.5) tet made in japan (55.5) (47.5) cn4 1 36 37 72 73 108 109 144 fg fg sg fg sg fg (19.5) (24) (295 8) ( 7) 6.4 (12.5) (19.5) (24) (12.5) (5) (45) black red ground wire f swex-144sd-1 target cn2 cn3 cn1 swex-144sd-e2 remark swex-120se-1 is a product of tokyo eletech corporation. side view

▲Up To Search▲

Price & Availability of IE-703204-G1-EM1

	To Download IE-703204-G1-EM1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .