? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 low cost six-way smt power divider 824 - 960 mhz rev. v5 DS56-0001 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. features ? small size, low profile ? superior repeatability (lot-to-lot variation) ? industry standard sow-16 smt plastic package ? typical isolation: 25 db ? typical insertion loss: 0.3 db ? low cost ? 1 watt power handling ? sow-16 package description m/a-com?s DS56-0001 is an ic-based monolithic power divider in a low cost sow-16 plastic package. this 6-way power divider is ideally suited for applica- tions where pcb real estate is at a premium and part count reduction and cost are critical. typical applications include base station switching networks and other cellular equipment, including subscriber units. available in tape and reel. the DS56-0001 is fabricated using a passive- integrated circuit process. the process features full- chip passivation for increased performance and reli- ability. ordering information part number package DS56-0001 bulk packaging DS56-0001-tr 1000 piece reel DS56-0001sam sample test board note: reference application note m513 for reel size information. functional diagram 1 pin configuration pin no. function pin no. function 1 rf3 (out) 9 gnd 2 gnd 10 gnd 3 rf2 (out) 11 gnd 4 gnd 12 rf6 (out) 5 rf1 (out) 13 gnd 6 gnd 14 rf5 (out) 7 rf in 15 gnd 8 gnd 16 rf4 (out) 1. pins 2, 4, 6, 8, 9, 10, 11, 13, and 15 must be dc and rf grounded.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 low cost six-way smt power divider 824 - 960 mhz rev. v5 DS56-0001 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications: t a = 25c, z 0 = 50 parameter units min typ max insertion loss above 7.8 db db ? 1.3 1.5 isolation db 20 25 ? vswr ? ? 1.4:1 1.6:1 amplitude balance db ? 0.2 0.5 phase balance deg. ? 6 8 recommended pcb configuration absolute maximum ratings 2,3 parameter absolute maximum input power 4 1 w cw operating temperature -40c to +85c storage temperature -65c to 150c 2. exceeding any one or combination of these limits may cause permanent damage to this device. 3. m/a-com does not recommend sustained operation near these survivability limits. 4. with internal load dissipation of 0.125 w maximum. handling procedures please observe the following precautions to avoid damage: static sensitivity gmic circuits are sens itive to electrostatic discharge (esd) and can be damaged by static electricity. proper esd control techniques should be used when handling these devices.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 3 low cost six-way smt power divider 824 - 960 mhz rev. v5 DS56-0001 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. isolation vs. frequency vswr vs. frequency typical performance curves insertion loss vs. frequency
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 4 low cost six-way smt power divider 824 - 960 mhz rev. v5 DS56-0001 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. sow-16 ? ? reference application note m 538 for lead-free solder reflow recommendations.
|
