audio/video switch 95
description 95 2 01.2000 fitting the pushbutton should be plugged-in to the mounting hole and solde- red onto the printed circuit board (pcb). construction the large lens is available in two versions, convex or concave form. the small lens is available only in flat form. the large pushbutton has space for 3 smd-led?s and the small one for 2 smd-led?s. marking the diffuser can be printed or engraved, or a film insert (use series 97 or 99 parts) can be fitted between the diffuser and the lens. mounting suitable for mounting on pcb?s with thickness of 1.5 to 2.5 mm (use smd-led?s for illumination). the separated spring clip contact holds the switch in place during the assembly and soldering process. the soldered joint makes the electrical contact and fixes the switch in the pcb. maximum soldering-temperature is 260 c for 5 seconds. there is a solder stop between the smd-led?s and the contact moun- ting areas. the pcb layout and mounting details are shown in the dimensional drawings. the switch must be used with a lens. switching system gold-plated momentary contact, 1 normally open, self-cleaning.
95 product assembly 3 03.2000 illuminated-/pushbutton 0 1 lens 2 diffuser 3 switching element 0 1 lens 2 diffuser 3 switching element
95 pushbuttons for standard mounting 4 03.2000 contacts: normally open = no switching action: momentary action = m technical drawings from page 8, mounting dimensions from page 8, component layouts from page 8 illuminated-/pushbutton c o n t a c t s s w i t c h i n g a c t i o n lens b 19.05 x 19.05 mm part no. b 12.70 x 12.70 mm part no. t e c h n i c a l d r a w i n g m o u n t i n g d i m e n s i o n s c o m p o n e n t l a y o u t e illuminated-/pushbutton 1 no m neutral, flat 95-313.720 1 1 1 0,003 neutral, concave 95-414.740 1 1 1 0,004 neutral, convex 95-414.730 1 1 1 0,004
5 01.2002 95 accessories at front lens shape colour b 19.05 x 19.05 mm typ-nr. b 12.70 x 12.70 mm typ-nr. e lens flat 95-704.720 95-703.720 0,001 95-704.750 95-703.750 0,001 concave 95-704.740 0,001 95-704.770 0,001 convex 95-704.730 0,001 95-704.760 0,001 diffuser colour b 19.05 x 19.05 mm typ-nr. b 12.70 x 12.70 mm typ-nr. e diffuser blue 95-804.620 95-803.620 0,001 yellow 95-804.420 95-803.420 0,001 grey 95-804.820 95-803.820 0,001 green 95-804.520 95-803.520 0,001 without 95-804.020 95-803.020 0,001 clear 95-804.720 95-803.720 0,001 orange 95-804.320 95-803.320 0,001 red 95-804.220 95-803.220 0,001 white 95-804.920 95-803.920 0,001 at back switching element c o n t a c t s b 19.05 x 19.05 mm typ-nr. b 12.70 x 12.70 mm typ-nr. e switching element no lens/diffuser 95-414.000 0,003 95-313.000 0,002
6 01.2002 95 accessories for large and small switches for large and small switches assembling lens remover part no. e lens remover 95-900.005 mounting tool part no. e mounting tool 95-900.009
7 03.2000 95 technical data material plastic pc / pei self extinguishing as per ul 94 v0, cd-free material of contacts cusn, contact gold-plated, soldering terminal tinned mechanical characteristics actuating travel 4.5 mm actuating force 3 n to end position switching point at 2.5 mm operation life time > 5 million operations as per iec 512-5, test 9a electrical characteristics power rating min. 1 mvdc/100 m a max. 48 vdc/50 ma electric strength <= 50 m w as per iec 512-2, test 2b electric strength 2.5 kvac as per iec 512-2-11 environmental characteristics degree of protection front as per ip40 operating temperature -25c to + 70c storage temperature -40c to + 80c resistance to vibration 10 g, at 10 - 2000 hz, 0.75 mm as per iec 512-4-4 resistance to shock 50 g/11 ms as per iec 512-4-3 illumination smd-led type p-lcc package or similar, radiation angle approx. 120; use of smaller smd-led is possible smd-led configurations size max. 2 smd-led's (switch size 12.70 mm) max. 3 smd-led's (switch size 19.05 mm) single colour or multi-colour circuit layout see dimension drawing tolerance of smd-led on the printed circuit board 0.2 mm height of smd-led max. 2.1 mm illuminated-/pushbutton
95 drawings 8 03.2000 1 illuminated-/pushbutton, switching element page 4, 1 illuminated-/pushbutton page 4 1 illuminated-/pushbutton page 4 technical drawings mounting dimensions component layouts
|
