the at18f-dk3 con gurator programming kit is a jtag in-system programming (isp) tool to program the atmel at18f series fpga con guration memories (con gurators). this kit provides designers an easy way to program, prototype, and evaluate the atmel at18f series con gurators, which are second source low cost replacement parts for the xilinx?xcfxxs series platform flash proms. in addition to using this pro- gramming kit for the following atmel at18f series con gurators, users can also use this dk3 base board with other cpld daughter boards that can be purchased separately for the programming and development of the atmel atf15xxas/asv/asvl/svl/be/re series cplds. at18f-dk3 con gurator programming kit jtag in-system programming (isp) fpga configurators at18f-dk3 kit supported devices at18f010-30xu at18f002-30xu at18f040-30xu at18f080-30xu density 1mbit 2mbit 4mbit 7mbit jtag isp yes yes yes yes package 20-pin tssop 20-pin tssop 20-pin tssop 20-pin tssop items description 1 dk3 base board base board that provides power supply, jtag and i/o voltage setting and jtag isp header, which is same as the base board for atf15xx-dk3 kit. 1 atf15xx-dk3-sax20 20-lead tssop socket adapter board for at18fxx-30xu series con gurators 1 atdh1150usb jtag isp usb cable 2 at18fxx-30xu con gurator samples atmel jcps software at18fxx series con gurator jtag isp programming software at18f-dk3 user guide at18f-dk3 user guide document at18f-dk3 kit contents
disclaimer: the information in this document is provided in connection with atmel products. no license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of atmel products. except as set forth in atmel? terms and conditions of sales located on atmel? web site, atmel assumes no liability whatsoever and disclaims any express, implied or statutory warranty relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpo se, or non-infringement. in no event shall atmel be liable for any direct, indirect, consequential, punitive, special or incidental damages (including, without limitation, damages for loss and p rofits, business interruption, or loss of information) arising out of the use or inability to use this document, even if atmel has been advised of the possibility of such damages. atmel makes no repres entations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to speci cations and products descriptions at any time without notice. atmel d oes not make any commitment to update the information contained herein. unless speci cally provided otherwise, atmel products are not suitable for, and shall not be used in, automotive applications. atmel s products are not intended, authorized , or warranted for use as components in applications intended to support or sustain life. ordering information ? 2009 atmel corporation. all rights reserved. atmel , logo and combinations thereof, and others are registered trademarks or trademarks of atmel corporation or its subsidiaries. other terms and product names may be trademarks of others. rev.: 3705a-cnfg-02/09 ordering code description price (usd) at18f-dk3 this development kit includes: dk3 base board ? atf15xxdk3-20sax socket adapter ? atdh1150usb jtag isp usb cable ? at18fxxx series con gurator samples ? cover page sheet ? $149 ATF15XXDK3-SAX20 20-lead tssop socket adapter only $50 atdh1150usb jtag isp usb cable only $50 note: for customers who already have the atf15xx-dk3 cpld development kit, they will only need to purchase the ATF15XXDK3-SAX20 and atdh1150usb. headquarters atmel corporation 2325 orchard parkway san jose, ca 95131 usa tel: (1) 408 441-0311 fax: (1) 408 487-2600 international atmel asia unit 01-05 & 16, 19/f bea tower, millennium city 5 418 kwun tong road kwun tong, kowloon hong kong tel: (852) 2245-6100 fax: (852) 2722-1369 atmel europe le krebs 8, rue jean-pierre timbaud bp 309 78054 st quentin-en- yvelines cedex france tel: (33) 1-30-60-70-00 fax: (33) 1-30-60-71-11 atmel japan 9f, tonetsu shinkawa bldg. 1-24-8 shinkawa chuo-ku, tokyo 104-0033 japan tel: (81) 3-3523-3551 fax: (81) 3-3523-7581 product contact product line configurators@atmel.com literature requests www.atmel.com/literature web site www.atmel.com
|
