 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| dvf-r4050 DVF-505 multiple dvd / vcd / cd player instruction manual kenwood corporation b60-5088-08 00 (k/e/t/y/x) oc 01/03 digital video digital video compact www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet
2 preparations dv-505/dvf-r4050 (en) caution: to reduce the risk of electric shock, do not remove cover (or back). no user-serviceable parts inside, refer ser- vicing to qualified service personnel. the lightning flash with arrowhead symbol, within an equilateral tri- angle, is intended to alert the user to the presence of uninsulated dan- gerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. the exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (ser- vicing) instructions in the literature accompanying the appliance. units are designed for operation as follows. safety precautions warning : to prevent fire or electric shock, do not expose this appliance to rain or moisture. the marking is located on the rear panel and says that the component uses laser beams that have been clas- sified as class 1. it means that the unit is utilizing laser beams that are of a weaker class. there is no danger of hazardous radiation outside the unit. class 1 laser product the marking of products using lasers (except for some areas) u.s.a. and canada ....................................................... ac 120v only australia ....................................................................... ac 240 v only before applying power caution : read this page carefully to ensure safe operation. introduction caution : read this page carefully to ensure safe operation. caution risk of electric shock do not open europe and u.k. ............................................................ ac 230v only *other countries .................... ac 110-120 / 220-240 v switchable www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 3 preparations dv-505/dvf-r4050 (en) introduction unpacking unpack the unit carefully and make sure that all accessories are put aside so they will not be lost. examine the unit for any possibility of shipping damage. if your unit is damaged or fails to operate, notify your dealer immedi ately. if your unit was shipped to you directly, notify the shipping company without delay. only the consignee (the person or company receiving the unit) can file a claim against the carrier for shipping damage. we recommend that you retain the original carton and packing materials for use should you transport or ship the unit in the fut ure. keep this manual handy for future reference. accessories please confirm that the following accessories are present. audio video cord (red, white, yellow) .......... (1) batteries (r6/aa) ............... (2) remote control unit ............ (1) coaxial cable ......................... (1) www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 4 preparations dv-505/dvf-r4050 (en) caution : read this page carefully to ensure safe operation. important safeguards 6. temperature C the appliance may not function properly if used at extremely low, or freezing temperatures. the ideal ambient temperature is above +5c (41f). 7. heat C the appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 8. electric shock C care should be taken so that objects do not fall and liquid is not spilled into the enclosure through openings. if a metal objects, such as a hair pin or a needle, comes into contact with the inside of this appliance, a dangerous electric shock may result. for families with children, never permit children to put anything, especially metal, inside this appliance. 9. enclosure removal C never remove the enclosure. if the internal parts are touched accidentally, a serious electric shock might occur. 10.magnetic fields C keep the appliance away from sources of magnetic fields such as tv sets, speaker systems, radios, motorized toys or magnetized objects. 11.cleaning C unplug this appliance from the wall outlet before cleaning. do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. use a clean dry cloth. 12.accessories C do not place this appliance on an unstable cart, stand, tripod, bracket, or table. the appliance may fall, causing serious injury to a child or adult, and serious damage to the appliance. use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the appliance. any mounting of the appliance should follow the manufacturers instructions, and should use a mounting accessory recommended by the manufacturer. an appliance and cart combination should be moved with care. quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. please read all of the safety and operating instructions before operating this appliance. adhere to all warnings on the appliance and in the instruction manual. follow all the safety and operating instructions. these safety and operating instructions should be retained for future reference. 1. power sources C the appliance should be connected to a power supply only of the type described in the instruction manual or as marked on the appliance. if you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. for appliances intended to operate from battery power, or other sources, refer to the instruction manual. 2. power-cord protection C power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 3. caution C polarization C this appliance may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). this plug will fit into the power outlet only one way. this is a safety feature. if you are unable to insert the plug fully into the outlet, try reversing the plug. if the plug should still fail to fit, contact your electrician to replace your obsolete outlet. do not defeat the safety purpose of the polarized plug. 4. ventilation C slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the appliance and to protect it from overheating, and these openings must not be blocked or covered. the appliance should be situated so that its location or position does not interfere with its proper ventilation. to maintain good ventilation, do not put records or a table- cloth on the appliance. place the appliance at least 10 cm away from the walls. do not use the appliance on a bed, sofa, rug or similar surface that may block the ventilation openings. this appliance should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturers instructions have been adhered to. 5. water and moisture C the appliance should not be used near water - for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 5 preparations dv-505/dvf-r4050 (en) 13.lightning C for added protection for this appliance during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. this will prevent damage to the appliance due to lightning and power-line surges. 14.abnormal smell C if an abnormal smell or smoke is detected, immediately turn the power off and unplug the appliance from the wall outlet. contact your dealer or nearest service center. 15.damage requiring service C the appliance should be serviced by qualified service personnel when: a. the power-supply cord or the plug has been damaged. b. objects have fallen, or liquid has been spilled into the appliance. c. the appliance has been exposed to rain or water. d. the appliance does not appear to operate normally by following the instruction manual. adjust only those controls that are covered by the instruction manual as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the appliance to its normal operation. e. the appliance has been dropped, or the enclosure damaged. f. the appliance exhibits a marked change in performance. 16.servicing C the user should not attempt to service the appliance beyond that described in the instruction manual. all other servicing should be referred to qualified service personnel. 17.outdoor antenna grounding C if an outside antenna is connected to the appliance, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges. article 810 of the national electrical code ansi/ nfpa 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. see figure. 18.power lines C an outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. when installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 19.ac outlets C do not connect other audio equipment with a power consumption larger than that specified to the ac outlet on the rear panel. never connect other electrical appliances, such as an iron or toaster, to it to prevent fire or electric shock. 20. overloading C do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock. 21. attachment C do not use attachments not recommended by the appliance manufacturer as they may cause hazards. 22. replacement parts C when replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original parts. unauthorized substitutions may result in fire, electric shock, or other hazards. 23. safety check C upon completion of any service or repairs to this appliance, ask the service technician to perform safety checks to determine that the appliance is in proper operating condition. notes: 1. item 3 is not required except for grounded or polarized equipment. 2. item 17 and 18 are not required except for units provided with antenna terminals. 3. item 17 complies with ul in the u.s.a. example of antenna grounding as per national electrical code power service grounding electrode system (nec art 250, part h) nec C national electrical code grounding conductors (nec section 810-21) antenna lead in wire antenna discharge unit (nec section 810-20) ground clamp electric service equipment ground clamps power off! important safeguards www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 6 preparations dv-505/dvf-r4050 (en) selecting a chapter or track ............................................................. 19 changing the audio language ........................................................... 20 changing the subtitle language ....................................................... 20 changing the camera angle ............................................................... 21 using introscan function .................................................................... 21 using bookmarks ................................................................................. 22 repeat play ............................................................................................ 23 a-b repeat play .................................................................................... 23 random play .......................................................................................... 24 program play .................................................................................. 25 set up functions ............................................................................ 27 set up menu ........................................................................................... 27 select audio language ....................................................................... 28 select subtitle language .................................................................... 28 select menu language ....................................................................... 29 select rating ......................................................................................... 29 password ............................................................................................... 30 tv aspect ............................................................................................... 32 dynamic range ..................................................................................... 33 digital audio out .................................................................................. 33 linear pcm ............................................................................................ 34 menu playback .............................................................................. 34 hierarchical structure of vcd menus ............................................... 34 playback without using the menu playback function (in case of a p.b.c.-compatible vcd) (to p.b.c. on or off) ........... 35 selecting the audio channel ............................................................. 35 mp3 function .................................................................................. 36 guidance of mp3 .................................................................................. 36 mp3 on-screen display ....................................................................... 37 playing back mp3 ................................................................................ 37 selecting mp3 files or folders ........................................................... 38 mp3 program playback ....................................................................... 39 knowledge ..................................................................................... 39 dvd menu language code list ........................................................... 40 dimmer function ................................................................................. 40 in case of difficulty ....................................................................... 41 specifications ................................................................................ 43 knowledge special features and contents special features this document classifies the applications of each feature using the following marks dvd : description of a feature that can be used with dvd. cd : description of a feature that can be used with cd. vcd : description of a feature that can be used with vcd. contents dvd dvd dvd cd vcd dvd dvd cd higher video quality than s-vhs video and laserdisc higher audio quality than music cd graphical user interface (gui) compatibility versatile dvd playback features dts digital output compatibility introduction ...................................................................................... 2 before applying power .................................................................... 2 safety precautions ............................................................................ 2 important safeguards ...................................................... 4 special features and contents ..................................................... 6 special features ..................................................................................... 6 contents ................................................................................................... 6 discs information ............................................................................ 7 types of playable discs ......................................................................... 7 unplayable discs .................................................................................... 7 icons on the dvd discs ......................................................................... 7 region codes ................................................................................... 8 region codes in the world .................................................................... 8 examples of tv screen display of each video format ..................... 8 video formats ................................................................................... 9 video formats of dvd discs that can be played on this unit .......... 9 region code table .................................................................................. 9 important items .............................................................................. 10 maintenance ......................................................................................... 10 reference ............................................................................................... 10 system connections ..................................................................... 11 connecting to a tv with video (composite) input terminal .......... 11 connecting to a tv with s-video input terminal ............................ 11 connecting to a tv with scart input terminals (for europe and u.k.) ..................................................................................................... 11 connecting to a tv with component input terminals (for other countries) ........................................................................................... 12 connecting to an audio component ................................................. 12 controls and indicators ................................................................ 13 operation of remote control unit ................................................ 14 playback of disc ............................................................................ 15 basic play .............................................................................................. 15 disc playback features ....................................................................... 16 playing discs by changing them ........................................................ 17 playing from the selected disc .......................................................... 17 switching sequential play mode ..................................................... 17 using the on-screen banner display ......................................... 18 selecting a title .................................................................................... 19 preparations operations caution : read the pages marked carefully to ensure safe operation. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 7 preparations dv-505/dvf-r4050 (en) discs information indicates the region code where the disc can be played. number of voice languages recorded with the audio function. the number in the icon indicates the number of voice languages. (max. 8 languages) number of subtitle languages recorded with the subtitle function. the number in the icon indicates the number of subtitle languages. (max. 32 languages) number of angles provided by the angle function. the number in the icon indicates the number of angles. (max. 9 angles) aspect ratios that can be selected. lb stands for letter box and ps for pan/scan. in the example on the left, the 16:9 vide o can be converted into letter box video. 9 32 8 16:9 lb all icon description icons on the dvd discs the system using this unit does not only play music from cd but can also play the discs listed below to offer you high-quality entertainment of video of movies and live concerts. unplayable discs video + audio audio contents played sides disc size one side only one side only max. 20 min., digital max. 74 min., digital one or both one or both approx. 41 min. (1 side, 1 layer) approx. 75 min. (1 side, 2 layers) approx. 82 min. (2 sides, 1 layer) approx. 150 min. (2 sides, 2 layers) approx. 133 min. (1 side, 1 layer) approx. 242 min. (1 side, 2 layers) approx. 266 min. (2 sides, 1 layer) approx. 484 min. (2 sides, 2 layers) dvd cd logo mark on disc this player cannot play back any of the following discs. playable disc types of playable discs ? dvd-rom discs ? dvd-r/dvd-ram/dvd-rw discs ? cd-rom discs ? vsd discs ? cdv discs (only the audio part can be reproduced.) 12cm 8cm 12cm 8cm ? cd-g/cd-eg/cd-extra discs (only the audio can be reproduced.) ? photo cd discs (never attempt to play them.) ? s-vcd discs max. 74 min. digital video digital video compact compact vcd 12cm one side only www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 8 preparations dv-505/dvf-r4050 (en) every player of this model has a certain region code assigned to it based on the country where the player is used. when the player is used to play back dvd discs, it can only play the dvd discs carrying the region codes matching the region code of the player. the region code for this player is described on the rear panel of the player. region codes region codes in the world the dvd players are given a region code according to the country or area it is marketed, as shown in the following map. 1 2 4 1 5 4 5 2 1 2 6 3 when your tv is compatible only with the pal format with certain discs, the playback pic- ture may have black spaces above and below it (as shown on the right). this is because the disc has been recorded in the ntsc format. the screen may be somewhat hard to see but this is not malfunction. when your tv is switchable between pal/ ntsc try play a disc. if the picture is black and white or as shown on the right, stop playback and switch the screen display formats of this unit and the tv to another format. this will improve the played picture quality. examples of tv screen display of each video format when your tv is compatible only with the ntsc format with certain discs, the playback pic- ture may be cut above and below it (as shown on the right). this is be- cause the disc has been recorded in the pal format. the screen may be somewhat hard to see but this is not malfunction. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 9 preparations dv-505/dvf-r4050 (en) major countries & areas japan, taiwan, korea, u.s.a., canada, mexico, philippines, chile, etc. china, north korea, u.k., germany, australia, new zealand, kuwait, singapore, etc. note note the video signals used to display tv pictures and video disc pictures are mainly based on two types of signal formats (pal and ntsc), which are assigned to each country or area as shown on the right. as a result, it is required to select discs according to the video format used with your tv monitor (in your country or area). video formats tv formats of major countries region code table normal video may not be reproduced when a disc recorded with the video format marked * in the above table is played. see examp les of tv screen display of each video format for details. 8 set the video formats of the dvd discs to be played on this unit as described below. check the video format(s) used by your tv monitor. ? refer to the operating instructions of your tv monitor for details. select dvd discs recorded with the playable video format by referring to the following table. ? see the region code table on the bottom of this page for details on districts 1 to 6 . 1 2 3 when your tv is switchable between ntsc and pal, ? districts 1 , 2 -2 and 4 -2: set the tv to ntsc . ? districts 2 -1, 4 -1 and 5 : set the tv to pal . ? districts 2 -3, 3 and 6 : set the tv according to each disc to be played. video formats of dvd discs that can be played on this unit tv format ntsc pal area or country name, region code district 1 north america district 2 -1 europe district 2 -2 japan district 2 -3 middle east district 3 southeast asia district 4 -1 oceania district 4 -2 south america district 5 russia district 6 china your tv format ntsc only pal only ntsc/pal switchable playable disc formats district 1 ntsc ntsc* ntsc district 2 -1 ntsc* pal* ntsc pal ntsc pal district 2 -2 ntsc ntsc* ntsc district 2 -3 ntsc pal* ntsc* pal ntsc pal district 3 ntsc pal* ntsc* pal ntsc pal district 4 -1 ntsc* pal* ntsc pal ntsc pal district 4 -2 ntsc ntsc* ntsc district 5 ntsc* pal* ntsc pal ntsc pal district 6 ntsc pal* ntsc* pal ntsc pal 1 2 2 2 3 4 4 5 6 restrictions due to difference between discs some dvd discs can be played only in certain playback modes according to the intentions of the software producers. as this player plays discs according to their intentions, some functions may not work as intended by you. please be sure to read the instructions provided with each disc. when an inhibition icon is displayed on the tv screen connected to the player, it indicates that the disc being played is under the restriction as described above. inhibition icon www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 10 preparations dv-505/dvf-r4050 (en) label side playing side cleaning if fingerprints or foreign matter become at- tached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. storage when a disc is not to be played for a long period of time, remove it from the player and store it in its case. handling hold the discs so that you do not touch the playing surface. disc handling precautions disc accessories the disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improving the sound quality or protecting discs as well as the disc cleaner should not be used with this system because they may cause malfunction. do not attach paper or tape to either the play- ing side or the label side of the discs. sticker sticky paste never play a cracked or warped disc during playback, the disc rotates at high speed in the player. therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. please do not use discs which are not round because they may cause a malfunction. important items cleaning unplug this appliance from the wall outlet before cleaning. do not use volatile solvents such as alcohol, paint thinner, gasoline, or benzine, etc. to clean the cabinet. use a clean dry cloth. caution against contact revitalizer do not use contact cleaners because it could cause a malfunction. be specially careful against contact cleaners containing oil, for they may deform the plastic component. maintenance reference beware of condensation when the difference between the internal temperature of the unit and external atmosphere is large, dew (mist) may be pro- duced on the internal parts of the unit. in such a case, turn the unit on and leave it for a few hours until the condensation has dried up. be especially careful in the following conditions: when the unit is brought into a place where there is a large difference in temperature between the previous location, when the humidity of the listening room is high, etc. note related to transportation and move- ment before transporting or moving this unit, carry out the following operations. 1. set the power key to on without loading a disc. 2. wait a few seconds and verify that the display shown appears. 3. set the power key to off. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 11 preparations dv-505/dvf-r4050 (en) audio output component video output video output cr cb y s-video optical coaxial l r system connections caution: do not plug in the power lead until all connections are com- pleted. make connections as shown below. when connecting the related system components, refer also to the instruction manuals of the related components. caution be sure to adhere followings. or proper ventilation will be blocked causing damage or fire hazard. ? do not place any objects impairing heat radiation onto the top of unit. ? leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below. top panel : 50 cm side panel : 10 cm back panel : 10 cm malfunction of microcomputer if operation is not possible or erroneous dis- play appears even though all connections have been made properly, reset the micro- computer referring to in case of difficulty. q connecting to a tv with video (composite) input terminal except for u.s.a. and canada connecting to a tv with s-video input terminal audio cord s-video cord tv tv audio output component video output video output cr cb y s-video optical coaxial l r audio cord and video cord audio cord and video cord audio output video output s-video av optical coaxial l r tv (for europe and u.k.) (for other countries) audio output video output s-video av optical coaxial l r s-video cord tv audio cord (for europe and u.k.) (for other countries) connecting to a tv with scart input terminal (for europe and u.k.) audio output video output s-video av coaxial l r tv www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 12 preparations dv-505/dvf-r4050 (en) connecting to a tv with component input terminals (for other countries) connecting to an audio component tv system connections audio output component video output video output cr cb y s-video optical coaxial l r audio cord video cords audio output video output s-video av optical coaxial l r av receiver or amplifier video cord, s-video cord audio cord coaxial or optical cable (for europe and u.k.) tv audio output component video output video output cr cb y s-video optical coaxial l r tv av receiver or amplifier video cord, s-video cord or component cords audio cord coaxial or optical cable (for other countries) www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 13 preparations dv-505/dvf-r4050 (en) controls and indicators parental lock indicator disc number indicator random indicator program indicator play/pause indicator seq. mode indicator title indicator track indicator chapter indicator hour indicator minute indicator second indicator display 1 power on / off switch % 2 disc tray % 3 disc skip key & 4 sequence mode key & 5 0 0 0 0 0 (open/close) key % 6 disc 1 ~ disc 5 keys & 7 6 6 6 6 6 (play/pause) key % 8 7 7 7 7 7 (stop) key % 9 4 4 4 4 4 (prev.) , (next) (skip) keys ^ dvd indicator vcd indicator cd indicator mp3 indicator p.b.c. indicator intro scan indicator repeat indicators repeat repeat 1 repeat disc repeat all discs a-b repeat character information display section www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 14 preparations dv-505/dvf-r4050 (en) the keys on the remote control unit with the same names as on the main unit have the same function as the keys on the main unit. 1 numeric keys * 2 clear key & 3 disc skip key ( 4 shift key 5 cursor up ( 5 5 5 5 5 ) , down ( ) , left ( 2 2 2 2 2 ) and right ( 3 3 3 3 3 ) keys & 6 p.mode key random key 7 slow (back slow/ forward slow) keys ^ step (back step/ forward step) keys ^ 8 1 1 1 1 1 key/ key (search key) ^ 4 4 4 4 4 (prev.) key/ (next) key (skip key) ^ loading batteries 2 insert batteries. 3 close the cover. 1 remove the cover. ? insert two r6/lr6 (aa-size) batteries following the polarity indications. operation insert the power plug into a power outlet, press the power key of the main unit to on, then press the desired remote control key. ? when pressing more than one remote control keys successively, press the keys securely by leaving an interval of 1 second or more between pressing of keys. operating range (approx.) remote sensor 1. the provided batteries are intended for use in operation checking, and their service life may be short. 2. when the remote controllable distance becomes short, replace both of the batteries with new ones. 3. if direct sunlight or the light of a high- frequency fluorescent lamp (inverter type, etc.) is incident to the remote sensor, malfunction may occur. in such a case, change the installation position to avoid malfunction. model : rc-d0308 infrared ray system operation of remote control unit 9 repeat key a a-b repeat key a 0 dimmer key ! menu keys @ on screen key & # top menu % , y $ audio key ( , y % angle key ) ^ return key enter key & & 7 7 7 7 7 (stop) key % 6 6 6 6 6 (play/pause) key % notes notes 123 456 789 0 clear on/off subtitle disc skip p.mode random multi control return enter repeat dimmer a-b 76 menu on screen top menu audio angle step slow 1 4 disc disc seq. mode shift 1 6 9 8 9 0 7 2 3 4 5 & ! @ # $ % ^ 30 30 6m www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 15 operations dv-505/dvf-r4050 (en/k,e,t,y,x) title track chap hour min sec dvd cd vcd mp3 ab playback of disc basic play preparation ? set the power on/off switch to the on ( ) position. load a disc 1 main unit 1 open the tray. 2 place a disc. 3 to set a disc to a different disc tray, press the disc skip key to change the position of the disc tray. 4 close the tray. ? when the key is pressed, the tray opens. when the key is pressed again, the tray closes. when the play/pause key is pressed while a tray is open, the tray closes automatically, and then playback begins. start playback 2 main unit remote title no. (dvd) chapter no. (dvd) track no. (cd) time display to stop playback main unit remote when a disc menu appears on the screen in case of interactive dvds, a disc menu appears on the screen. then press enter to select specific menu you want to play by using cursor keys. ? each press pauses and plays the disc alternately. resume playback when a menu screen is recorded on the disc, the menu screen will be displayed when the top menu key is pressed. at the menu screen, the menu can be se- lected by pressing the cursor keys. when the stop key has been pressed once during playback to stop the playback, and then playback is started again, play will start from the point where the playback had been stopped. this is called the resume function. when the stop key is pressed again during stop, the resume function is can- celled. resume is cancelled when 5 minutes have passed in resume status. power on/ off switch 6 (play/ pause) key 7 (stop) key 7 (stop) key 0 (open/close) key 6 (play/pause) key top menu key top menu 6 7 label side www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 16 operations dv-505/dvf-r4050 (en/k,e,t,y,x) 1 2 (f.search 1)/(r.search 1) 2 4 (f.search 2)/(r.search 2) 3 8 (f.search 3)/(r.search 3) disc playback features main unit remote cd dvd vcd skipping chapters or tracks ? the chapter (or track) in the direction of the key pressed is skipped, and the selected chapter (or track) will be played from the beginning. ? when the 4 key is pressed once during playback, the chapter (or track) being played will be played from the beginning. to skip backward to skip forward to skip backward to skip forward cd dvd vcd searching remote to search backward to search forward ? during playback, press the 1 1 1 1 1 or key ? each press switches the searching speed. 1 2 (f.search 1)/(r.search 1) 2 4 (f.search 2)/(r.search 2) 3 8 (f.search 3)/(r.search 3) 4 16 (f.search 4)/(r.search 4) dvd vcd step (freeze frame and frame advance) ? each time you press the keys, the picture advances one frame. ? at the time of vcd playback, backward step is not possible. ? press the play key to resume normal playback. remote dvd vcd slow motion playback ? during playback, press the slow keys ? each press switches the motion speed. 1 f.slow 1/16 (r.slow 1/16) 2 f.slow 1/8 (r.slow 1/8) 3 f.slow 1/4 (r.slow 1/4) 4 f.slow 1/2 (r.slow 1/2) (at the time of vcd playback) 1 f.slow 1/8 (r.slow is not possible) 2 f.slow 1/4 (r.slow is not possible) 3 f.slow 1/2 (r.slow is not possible) ? press the play key to resume normal playback. remote notes notes ? you wont hear the sound (audio) on the dvd when youre using the skip, search, step or slow motion features. ? playback features are not available during the open- ing credits of a movie. (at the time of dvd playback) (at the time of cd/vcd playback) playback of disc ? press the play key at any time to resume normal playback. 1 4 step slow 6 key slow step 6 (play/pause) key 1 , 4 , 4 , (skip) keys www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 17 operations dv-505/dvf-r4050 (en/k,e,t,y,x) playback of disc main unit remote cd dvd vcd playing discs by changing them ? press disc skip key to skip a disc. ? when the disk skip key is pressed while the tray open , the tray simply rotates. main unit remote cd dvd vcd playing from the selected disc ? press one of disc1 to disc5 key to select a disc. ? the disc number indicator above one of the disc1 to disc5 key on the main unit lights up and playback starts. ? at the time of operating on the remote, press 1 to 5 key within 3 seconds after pressing shift key. cd dvd vcd switching sequential play mode ? press sequence mode key to select play mode. ? at the time of operating on the remote, press 6(seq.mode) key within 3 seconds after pressing shift key. ? each press switches the sequential play mode. press ithin 3 seconds after pressing shift key. the player is capable of sequential playback using the 5disc carousel disc changer. if a dvd and/or vcd is mixed in the discs to be played sequentially, the sequential playback may stall in the middle while the menu remains displayed. in such a case, switch the sequential play mode of the player. main unit remote 1 sequential play mode 1 (seq.1 ) 2 sequential play mode 2 (seq.2 ) 3 nomal play mode sequential play mode 1(seq.1 lit) all discs can be played including dvd discs. when there is a p.b.c.-compatible vcd or a dvd on the tray, sequential playback may sometimes be interrupted and the menu displayed. in this case, perform menu playback. sequential play mode 2(seq.2 lit) playback of dvd discs is skipped in order not to interrupt sequential playback. with a p.b.c.-compatible vcd, playback is performed by switching p.b.c. automatically to off. press ithin 3 seconds after pressing shift key. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 18 operations dv-505/dvf-r4050 (en/k,e,t,y,x) using the on-screen banner display the on-screen banner display contains many playback features. to see the banner display, press on screen key on the remote while a disc is playing. use the cursor (up/down/left/right) keys on the remote to move through the different features in the banner display. each feature is illustrated with an icon. title angles disc type time indicator chapter subtitles bookmarks audio disc number when playing a dvd when playing a cd/vcd track introscan time information bookmarks disc type time indicator disc number 1 during playback, press the on screen key on the remote. notes notes notes ? you can only access the banner display when youre playing a disc. ? the banner display feature are only available if the disc was created with that particular feature (i.e., if you select the subtitle icon, you wont be able to change the subtitle language unless the author of the disc created the disc with subtitles). ? the invalid symbol appears on the screen when you press a key that doesnt have any function. if one of the icons is grayed out, the banner display feature isnt available for the disc youre playing. 2 press the cursor left/right ( 2 / 3 ) keys to highlight a banner display icon. 3 press the enter key. to display disappear from the screen or press the on screen key or clear key switch the cd time indicator as follows. 1 select the time information with the cursor key. 2 each time the enter key is pressed, the time indicator changes as follows. 1 track elapsed (elapsed time of the track being played) 2 track remain (remaining time of the track being played) 3 disc elapsed (elapsed time of the disc being played) 4 disc remain (remaining time of the disc being played) time indicator contents on screen multi control enter on screen clear www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 19 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd selecting a title dvd cd vcd selecting a chapter or track some discs contain more than one title. for example, there might be four movies on one disc (each movie might be considered a title). because dvd discs use digital technology, a title can be divided into individual chapters (similar to tracks on a cd). you can skip a specific chapter by using the chapter section in the banner display. 1 during playback, press the on screen key on the remote. 2 press the cursor left/right ( 2 / 3 ) keys until the title icon is high- lighted. 3 press the enter key. (t__ appears) 4 use the numeric keys to enter the title number. when you enter a one-digit title number, you may have to press enter on the remote after pressing the numeric key (1~9) on the remote. otherwise press 0 first and the other value. then play starts. this varies depending on number of title within the disc youre playing. note note some discs only have one title. 1 during playback, press the on screen key on the remote. 2 press the cursor left/right ( 2 / 3 ) keys until the chapter or track icon is highlighted. 3 press the enter key. (c__ or tr__ appears) 4 use the numeric keys to enter the chapter or track number. when you enter a one-digit chapter or title number, you may have to press enter on the remote after pressing the numeric key (1~9) on the remote. oth- erwise press 0 first and the other value. then play starts. this varies depending on number of chapter or track within the disc youre playing. note note ? the chapter feature wont work if the disc isnt formatted with separate chapters. ? p.b.c. on mode of vcd, the selecting a track function may not work. using the on-screen banner display on screen on screen multi control enter multi control enter www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 20 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd changing the audio language if the disc was created with different language tracks, you can use the banner display to temporarily change the dvd players audio setting. you can change the subtitle language while youre watching a disc (but only if the disc was created with subtitles). dvd changing the subtitle language 2 press the cursor left/right ( 2 / 3 ) keys until the audio icon is highlighted. 3 press the enter key. the audio menu appears using the on-screen banner display using the on-screen banner display using the audio key on the remote using the subtitle key on the remote 4 select the audio language with press the enter key. 1 during playback, press the audio key on the remote. 2 select the audio language with press the enter key or audio key. 1. the language feature only works if the disc was created with multiple audio tracks. 2. when you chose an audio language from the banner dis- play, you only override the audio language setting in the dvd players main menu (in the language preferences menu within setup menu) temporarily. notes notes 1 during playback, press the on screen key on the remote. 1 during playback, press the on screen key on the remote. 2 press the cursor left/right ( 2 / 3 ) keys until the subtitle icon is high- lighted. 3 press the enter key. the subtitle menu appears 4 select the subtitle language with press the enter key. 5 press the subtitle on/off key to sub title on or off. 1 during playback, press the sub- title key on the remote. 2 select the subtitle language with press the enter key or subtitle key. 3 when the subtitle on/off key is pressed, subtitles will be displayed. switching between display of subtitles and no display of subtitles is done each time the key is pressed. 1. the subtitle feature only works if the disc was created with multiple subtitle tracks. 2. the subtitle menu of the disc appears in some discs. notes notes notes ? the menu is switched off when no operation is performed for about 5 seconds. ? the menu is switched off when no operation is performed for about 5 seconds. displayed when subtitle is on displayed when sub title is on using the on-screen banner display ? the menu is switched off when no operation is performed for about 5 seconds. on screen on screen multi control multi control enter enter audio subtitle on/off www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 21 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd changing the camera angle cd vcd using introscan function using the angle key on the remote using the on-screen banner display 2 press the cursor left/right ( 2 / 3 ) keys until the angle icon is high- lighted. 3 press the enter key. the angle menu appears 4 select the angle with press the enter key. 1 during playback, press the angle key on the remote. 2 select the camera angle with press the enter key or angle key. 1 during playback, press the on screen key on the remote. some disc contains multiple angles particular scene or sequence. if the disc only has one angle, this feature wont work. introscan plays the first few seconds of each track on only one disc similar to the scan feature thats on many car radios. this function can not be used over several discs using the on-screen banner display 2 press the cursor left/right ( 2 / 3 ) keys until the introscan icon is highlighted. 3 press the enter key. 1 during playback, press the on screen key on the remote. ? the first 10 seconds of each track play. ? after intro scan goes through all of the tracks, it stops. ? if you want to stop introscan while its in progress, just press enter key on the remote (the current track starts playing in its entirety). using the on-screen banner display ? the menu is switched off when no operation is performed for about 5 seconds. ? the menu is switched off when no operation is performed for about 5 seconds. on screen multi control on screen multi control enter enter angle note note p.b.c. on mode of vcd, the introscan function may not work. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 22 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd cd vcd using bookmarks create the bookmark recalling a bookmarked scene clearing a bookmark 2 press the cursor left/right ( 2 / 3 ) keys until the bookmark icon is highlighted. 3 press the enter key. the bookmark menu appears 4 when you reach the scene you want to mark, press enter key. 1 during playback, press the on screen key on the remote. the bookmark appears on under square 4 press the cursor up ( 5 ) key on the remote to go the parts of the book- mark menu. the bookmark appears on under square the bookmark feature lets you mark a point on the disc that you can go to q uickly. you can store up to 9 bookmarks. 5 use the cursor left/right ( 2 / 3 ) keys on the r emote to select the bookmarked scene you want to acti- vate. 6 press the enter key to active the bookmark. ? the bookmark is cleared each time the disc changes or when the power is turned off. notes notes ? if all 9 bookmarks are in use, you can still mark new scenes, but the previous bookmarks will be erased. ? this function can not be used over several discs. ? depending on the disc, the bookmark function may not work ? p.b.c. on mode of vcd, the bookmark function may not work . 2 press the cursor left/right ( 2 / 3 ) keys until the bookmark icon is highlighted. 3 press the enter key. 1 during playback, press the on screen key on the remote. ? you can go to bookmarked scene by the numeric key (1~9) on the step 5 . ? press the on screen key or clear key to switch the menu off. ? press the on screen key or clear key to switch the menu off. using the on-screen banner display on screen multi control enter on screen multi control enter enter multi control multi control enter return to the previ- ous banner display www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 23 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd cd vcd repeat play dvd cd vcd a-b repeat play desired titles or discs can be played back repeatedly. there are five repeat options: ? all disc C repeat all disc in tray that is playing. when sequential mode is on, this option appears. ? 1 disc C repeat the disc that is playing. ? title C repeat the title that is playing. ? chapter C repeat the chapter that is playing. ? track C repeat the track that is playing. the a-b repeat function lets you mark a segment to repeat between the beginning a and the end b of the segment you want to replay. 1 during playback, press repeat on the remote. the repeat display appears each press the key switches the repeat mode. 1 repeat all discs ---display lit repeat all discs 2 repeat 1 disc --- display lit repeat 1 disc 3 repeat title --- display lit repeat 4 repeat chapter --- display lit repeat 1 5 repeat off ? the menu is switched off when no operation is performed for about 5 seconds. 1 repeat all discs) ---display lit repeat all discs 2 repeat disc --- display lit repeat 1 disc 3 repeat track --- display lit repeat 1 4 repeat off display the repeat a- display appears 1 press the a-b key on the remote when you want to choose a scene (sound) as the beginning point. 2 press the a-b key again to choose a scene (sound) as the end point. lit lit the repeat a-b display appears display display ? the menu is switched off when no operation is performed for about 5 seconds. at the time of dvd playback at the time of cd/vcd playback at the time of repeat mode "repeat" is light. ? to cancel repeat playback, press the repeat key and select "repeat off". ? to cancel a-b repeat playback, press the a-b key and select "repeat off". using the on-screen banner display repeat a-b repeat all repeat disc s a-b repeat ab repeat ab note note p.b.c. on mode of vcd, the repeat play function may not work. note note p.b.c. on mode of vcd, the a-b repeat play function may not work. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 24 operations dv-505/dvf-r4050 (en/k,e,t,y,x) cd vcd random play the tracks of only one disc are played in random order. 1 during playback or stop mode, press random on the remote. each time you press random on the remote, random play would be on and off. 1 random play 2 standard play the random play display appears display lit ? the menu is switched off when no operation is performed for about 5 seconds. the standard play display appears when random is off. using the on-screen banner display random random ab note note ? when playing a dvd, the random function may not work. ? p.b.c. on mode of vcd, the random play function may not work. ? when switching to random mode with seq. mode on, seq. mode automatically becomes off. with later return from random mode to normal playback, seq. mode returns to on. ? in case of cd random playback, the unit stops after random playback of 32 tracks. (random playback will not be made for tracks in excess of 32 tracks.) random play in "repeat all disc" mode: 1 random play is performed for one disc, and when all titles of that disc have been played, the unit will switch to the next disc. 2 all titles of this disc will be played in random order in the same way, and then the unit will switch to the next disc. 3 when random play has been completed for all discs, the unit will return to the first disc and random play will be repeated. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 25 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd cd vcd program play program edit 1 during stop mode, press the p.mode key on the remote 2 select specific disc/title/chapter or track by press cursor up/down ( 5 / ) keys or numeric keys (0-9). 3 press the enter key. program edit display appears. (an example of dvd program edit menu) 4 select add icon on the screen to register selected value onto playlist, then press the enter key. you can listen to the desired tracks or chapters of the current disc in any desired order. 5 you can select maximum 32 val- ues by repeating step 2 - 4 . 6 press the play key to start play- back. program edit 1 all add delete c t d play done disc (2) chapter 2 title (12) playlist 2 : selected icon : an icon which can be selected : an icon which presently can not be selected program edit 2 all add delete c t d play done disc (2) chapter 2 title (12) playlist 2all 2 ? when you dont add values onto playlist and return to play mode, select done icon and press enter key on the remote. ? while a disc is playing, press p.mode key on the remote to start program play ? to return to standard play, press the p.mode key again. ? mp3 discs can not be programmed with this pro- gram mode. (mp3 program play ? ) p.mode multi control enter multi control enter add icon --- add value onto playlist delete icon --- delete value from playlist insert icon --- insert value in playlist play icon --- play program play done icon --- return to stop or resume mode note note registering and playing the program insert all of the discs to be used in programming in the tray, close it and press the disc 1 to 5 keys so that the player reads the disc information by playing each disc until display readind disappears. (if the tray is opened after this, the above procedure should be repeated so that the player reads all disc information again.) www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 26 operations dv-505/dvf-r4050 (en/k,e,t,y,x) program play insert chapter or track during stop mode, press the p.mode key on the remote program edit all insert c t d play done disc (2) chapter playlist 2all 312 18 1all 35 2 3 1 1 3 delete 2 title (12) 2 1 select specific disc/title/chapter or track to i nsert by press cursor up/down ( 5 / ) keys or numeric keys (0-9). program edit all insert c t d play done disc (2) chapter playlist 1all 412 18 1all 35 2 2 3 1 1 3 2all delete 1 title (12) 2 (an example of dvd program edit menu) 2 move the cursor with the cursor right ( ? ) key to the "playlist" and select the column to be added with the cursor up/down ( 5 / ) keys. (the color of the column where the cursor is located will change.) 3 move the cursor with the cursor left ( 2 ) key to the insert icon and press the enter key. the new chapter or track will be in- serted before (above) the selected column. multi control multi control multi control enter delete program during stop mode, press the p.mode key on the remote selected value deletes program edit all add c t d play done disc (2) chapter playlist 1all 412 28 1all 5 2 3 1 1 35 delete 1 title (12) 2 1 use the cursor up/down ( 5 / ) keys to select the column to be deleted from the "playlist". (the color of the column where the cursor is located will change.) 2 press the cursor left ( 2 ) key, use the cursor up/down keys to move the cursor to the delete icon, and press the enter key. or press the clear key. multi control multi control enter p.b.c. on mode of vcd, the progam play func- tion may not work. release program play in following case, program play would be released. 1. when you open and close tray. 2. when you turn power off and on. note note www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 27 operations dv-505/dvf-r4050 (en/k,e,t,y,x) set up functions set up menu the initial setup of the player, which has been made at the factory, can be changed to the desired setup. 1 during stop mode or resume mode, press menu key on the remote. audio / subtitle : this sets the language to be used when playing a disc. (if a disc does not contain the recording the selected language, it is played in the priority language set for each disc.) menus : this sets the initial setup of language as well as the language used in on-screen messages such as play. rating : this can restrict playback of adult-oriented dvd discs that you do not want to be seen by children. however, even when a dvd disc is marked adult-oriented or so on the label, its viewing cannot be restricted unless the restriction level is recorded in the disc itself. password : the password for rating setting, change, cancellation, etc. is set. tv aspect : this sets the screen size (4:3 or 16:9 aspect ratio) according to the connected tv. 4 x 3 letterbox : choose this setting if you would prefer to see movies in their original aspect ratio. you will see the entire frame of the movie, but it will occupy a smaller portion of the screen. this setting may result in the movie appearing with black bars at the top and bottom of the screen. 4 x 3 pan scan : choose this setting if you want the movie to fill the entire screen of your tv. you wont see part of the picture (particularly the right and left edge). some disc produced in a wide screen format cant be cropped in this fashion, which means the black bars would appear at the top and the bottom of the screen. 16 x 9 widescreen : choose this setting if your dvd player is connected to a widescreen tv. dynamic range : this is set to on when the volume change should not become overly large, for example when listening late at night. digital audio out : this sets the type of audio output from the digital audio output jack. current setup menu display appears on the screen. 2 press cursor up/ down ( 5 / ) keys on the remote to select the item, then press the enter key to ac- cess the sub features (disc languages) how to use the return key when the return key is pressed, the display returns to the previous screen (stop mode). menu multi control enter return (menu display example) www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 28 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd select audio language dvd select subtitle language 1 press cursor up/ down ( 5 / ) keys on the remote to select audio on the set up menu display, then press the enter key. 2 press cursor up/ down ( 5 / ) keys on the remote to select specific audio language, then press the enter key. ? press play key to resume normal playback. to select other language 1 select other and press en- ter key 2 input code in the first digit by press cursor up/down ( 5 / ) keys or numeric keys on the remote and repeat other 3 code with same way. 3 press the enter key on ok icon. (dvd menu language code list ) 1 press cursor up/down ( 5 / ) keys on the remote to select subtitle on the set up menu display, then press the enter key. 2 press cursor up/down ( 5 / ) keys on the remote to select specific subtitle language, then press the enter key. to select other language 1 select other and press en- ter key 2 input code in the first digit by press cursor up/down ( 5 / ) keys or numeric keys on the remote and repeat other 3 code with same way. 3 press the enter key on ok icon. (dvd menu language code list ) ? press play key to resume normal playback. (audio menu appears.) (subtitle menu appears.) set up functions multi control enter multi control enter multi control enter multi control enter www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 29 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd select menu language dvd select rating 1 press cursor up/ down ( 5 / ) keys on the remote to select menus on the set up menu display, then press the enter key. (menus appears.) 2 press cursor up/ down ( 5 / ) keys on the remote to select specific audio language, then press the enter key. ? press play key to resume normal playback. this part of dvd rating lets you determine how your player will react discs that contain movies that are rated (in the u.s.a. the motion pictures association of america rates movies as g, pg, pg-13, etc.). 1 press cursor up/down ( 5 / ) keys on the remote to select menus on the set up menu display, then press the enter key. (rating aspect menu appears.) 2 press cursor up/down ( 5 / ) keys on the remote to highlight rated titles, then press the enter key. ? press play key to resume normal playback. when a password already has been set, the screen for change of the en- tered password will be displayed. in that case, enter the password. (see page 30.) set up functions multi control enter multi control enter multi control enter multi control enter parental lock level level 8: all dvds can be played back.(factory preset) level 7 to 2: dvds for general audiences/children can be played back. (dvds for adults are prohibited.) level 1: dvds for children can be played back. (dvds for adults/general audiences are prohibited.) www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 30 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd password input password 1 press cursor up/ down ( 5 / ) keys on the remote to select password on the set up menu display, then press the enter key. (password menu appears.) 2 after select set password, press the enter key. 3 press cursor up/ down ( 5 / ) keys or numeric keys on the remote to enter password. 4 press enter key to finish pass- word input (confirm password display appears below enter pass- word display). 5 press cursor up/down ( 5 / ) keys or numeric keys on the remote to enter again password that you entered. 6 press the enter key on ok icon. ? press play key to resume normal playback. set up functions multi control enter multi control enter multi control enter www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 31 operations dv-505/dvf-r4050 (en/k,e,t,y,x) change password dvd password (continued) 1 press cursor up/ down ( 5 / ) keys on the remote to select password on the set up menu display, then press the enter key. (enter password menu appears.) 2 press cursor up/ down ( 5 / ) keys or numeric keys on the remote to enter password. press the enter key on ok icon. 3 press cursor up/ down ( 5 / ) keys to select change password, then press enter key. 5 press enter key to finish pass- word input (confirm password display appears below enter pass- word display). 4 press cursor up/down ( 5 / ) keys or numeric keys on the remote to enter password. 6 press cursor up/down ( 5 / ) keys or numeric keys on the remote to enter again password that you entered. 7 press the enter key on ok icon. set up functions multi control enter multi control enter multi control enter multi control enter ? press play key to resume normal playback. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 32 operations dv-505/dvf-r4050 (en/k,e,t,y,x) clear password dvd password (continued) 1 press cursor up/ down ( 5 / ) keys on the remote to select password on the set up menu display, then press the enter key. (enter password menu appears.) 2 press cursor up/ down ( 5 / ) keys or numeric keys on the remote to enter password. press the enter key on ok icon. 3 press cursor up/ down ( 5 / ) keys to select clear password, then press enter key. dvd tv aspect 1 press cursor up/ down ( 5 / ) keys on the remote to select tv aspect on the set up menu display, then press the enter key. (tv aspect menu appears.) 2 press cursor up/ down ( 5 / ) keys on the remote to select tv aspect menu, then press the enter key. ? press play key to resume normal playback. set up functions multi control enter multi control enter multi control enter multi control enter ? press play key to resume normal playback. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 33 operations dv-505/dvf-r4050 (en/k,e,t,y,x) dvd dynamic range 1 press cursor up/ down ( 5 / ) keys on the remote to select dynamic range on the set up menu dis- play, then press the enter key. (dynamic range menu appears.) 2 press cursor up/ down ( 5 / ) keys on the remote to select dynamic range mode (on or off), t hen press the enter key. ? press play key to resume normal playback. dvd digital audio out pcm : choose this setting for all connection scenarios, except the dolby digital or dts receiver or decoder connection. dolby digital : choose this setting if you connected dolby digital receiver or decoder to your dvd player. dts : choose this setting if you connected dts receiver or decoder to your dvd player for europe and u.k. mpeg-2/dts : choose this setting if you connected dts receiver, decoder or mpeg audio to your dvd player. 1 press cursor up/ down ( 5 / ) keys on the remote to select digital au- dio out on the set up menu dis- play, then press the enter key. (digital audio out display appears.) 2 press cur sor up/down ( 5 / ) keys on the remote to select specific digital audio out mode, then press the enter key. ? press play key to resume normal playback. dts disclaimer clause when playing dts-encoded (cds, dvds), excessive noise will be exhibited from the analog stereo outputs. to avoid possible damage to the audio system, the consumer should take proper pre-cautions when the analog stereo outputs of the dvd player is connected to an amplifica- tion system. to enjoy dts digital surround? playback, an external 5.1 channel dts digital surround? decoder system must be connected to the digital output (s/p dif, aes/ebu, or toslink) of the dvd player. set up functions when the dts of digital audio out or the dolby digital setting and the format recorded on the disc are different from each other, audio may not be put out. please switch according to the indication on the disc. note note multi control enter multi control enter multi control enter multi control enter www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 34 operations dv-505/dvf-r4050 (en/k,e,t,y,x) set up functions menu playback vcd hierarchical structure of vcd menus first level (menu) when an item is selected on the menu screen during playback of a p.b.c.-compatible vcd, another menu with more details items may be displayed. when a number of menus are connected in multiple layers in this way, it is said that the menus have a hierarchical structure. in this structure, the desired scene can be reached by repeating item selections on the menu screens. example for a hierarchical structure dvd linear pcm 96khz => 48khz : even in case of 96 khz digital signal, dvd will deliver 48 khz signal out. 96khz => 96khz : in case of 96 khz digital signal, dvd will deliver 96 khz signal out. in this case your receiver should control 96 khz signal. 1 press cursor up/ down ( 5 / ) keys on the remote to select linear pcm on the set up menu display, then press the enter key. (linear pcm display appears.) multi control enter second level (submenu) third level (scenes) advancing when an item is selected on the menu screen with the 3 key or the numeric keys, advance is made to the next lower menu level. when the advance destination is the scene to be played, the contents will be played. ? when several menus (scenes) can be selected in each level, screen switching is possible with the keys (next) and 4 (prev.). returning each time the return key is pressed, return is made to the next higher menu. soft jacket indication ? depending on the software, the jacket indication may differ from the above. 4 3 examples of operation keys and indications used during vcd playback kenwood operation key play return skip up skip down menu playback enter or select enter www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 35 operations dv-505/dvf-r4050 (en/k,e,t,y,x) ? for the track numbers, refer to the disc jacket or other material. ? p.b.c. off mode : without using menu playback function. vcd playback without using the menu playback function (in case of a p.b.c.-compatible vcd) (to p.b.c. on or off) to return to menu playback press the top menu key again. press the top menu key on the remote control unit. top menu pbc lit pbc goes off p.b.c. on mode p.b.c. off mode vcd selecting the audio channel during vcd playback, press audio key on the remote. each press the key switches the mode. 1 stereo 2 left 3 right you can choose to play back only the right or the left channel of audio recorded on the disc, or you can select stereo playback. this function is used for purposes such as selecting the vocal track on a karaoke disc. audio menu playback www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 36 operations dv-505/dvf-r4050 (en/k,e,t,y,x) mp3 function guidance of mp3 media that can be played back with this equipment usable media : cd-rom, cd-r, cd-rw usable formats : iso9660 level 1. files that can be played back : mp3 files creating media for playing back on this equipment compressing mp3 please set up the transfer bit rate setting for the compression software when compressing mp3 files as follow. mp3 files : 128kbps recommended (32kbps-320kbps) ? this unit is compatible with 32 khz, 44.1 khz(recommended) and 48 khz sampling frequencies. naming folders and files single-byte characters between a and z, single-byte numerais between 0 and 9, and the single-byte underscore(_) can be displayed. ensure that the .mp3(mp3 files) extension log is attached to all file names. ? never add the mp3 extension log to any files other than mp3 files. if the mp3 extension log is added to any files other than mp3 files, the equipment will assume that they can be played back, and this will produce loud noises in the speakers, resulting in damage of adverse effects. confirming media and files check to ascertain that mp3 files can be played back correctly on the personal computer in use prior to saving them onto the me dia. check to ensure that the saved file can be played back normally. ? it is not possible to confirm that files can be played back correctly while they are being saved onto the media. when saving files onto media ensure that the session is closed or finalized when data has been written on media. there are cases where media on which the session has not be closed or finalized will not be played back correctly with this equipment. ? there are cases were the folder names and file names will not be displayed correctly depending on the software used to save them. ? do not store files or folders other than mp3 on media to be played back with this equipment. ? it is recommended that ten or less sessions are stored when recording mp3 files onto a media. ? there are cases where playback is not possible when mp3 files (cd-rom) and music cd infomation (cd-da) are saved on the same media. example for a hierarchical structure www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 37 operations dv-505/dvf-r4050 (en/k,e,t,y,x) mp3 on-screen display playing back mp3 press 6 key. (when you insert the mp3 media, playback will start automatically.) press 7 (stop) key. (mp3 on-screen display appears.) mp3 function when you insert mp3 media, the mp3 on-screen dis- play appears. playing file name time elapsed program window root icon folder icon all clear icon files return folder icon ? it is not possible to play back folders and files(up to 223) that exceed the maximum limitations of the media. ? a certain amount of time is required for the player to confirm the media on which mp3 files have been recorded before playback will commence. ? the files will be played back in the sequence in which they were recorded (written). main unit remote 6 playback main unit remote 7 to stop playback press 4 or key. skipping files main unit remote to skip backward to skip forward to skip backward to skip forward 4 my song1 hallow-1 megadeth madonna rcy23mnn extreme carman-1 italy eagles all clear note note folder names and file names are displayed up to 8 characters. when folder names and file names are recorded with more than 8 characters, the names will be displayed in abbreviated form. my song1 hallow-1 megadeth madonna rcy23mnn extreme carman-1 italy eagles all clear madonna lucky-1 likea-1 likea-1 true-1 lucky-1 open-1 holiday into-1 whihe-1 every-1 all crear lucky-1 true-1 open-1 whihe-1 holiday into-1 0:04:56 www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 38 operations dv-505/dvf-r4050 (en/k,e,t,y,x) selecting mp3 files or folders ? playback will start from selected file. ? files in the next folder will be played back when no files exsit in the selected folder. selects the files to be played back directly. 2 press cursor up/down ( 5 / ) keys on the remote to select the file, then press the enter key. multi control enter 1 press cursor up/ down ( 5 / ) keys on the remote to select the folder, then press the enter key. ? the files and folders in the selected folder appear. multi control enter ? press enter key on return folder icon to move to the upper layer. selects the folders to be played back directly. 2 press cursor up/ down ( 5 / ) keys on the remote to select the upper folder icon, then press play key. multi control enter 1 during stop mode,press cursor up/down ( 5 / ) keys on the remote to select the folder,then press the enter key. ? playback will start from selected folder. ? files in the next folder will be played back when no files exsit in the selected folder. 6 mp3 function my song1 hallow-1 megadeth madonna rcy23mnn extreme carman-1 italy eagles all clear madonna all clear likea-1 lucky-1 true-1 open-1 whihe-1 holiday into-1 madonna all clear likea-1 lucky-1 true-1 open-1 whihe-1 holiday into-1 madonna all clear likea-1 lucky-1 true-1 open-1 whihe-1 holiday into-1 www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 39 operations dv-505/dvf-r4050 (en/k,e,t,y,x) mp3 program playback ? the selected file go to program window. 2 press cursor up/down ( 5 / ) keys on the remote to select the file, then press the enter key. multi control enter mp3 function you can listen to the desired files of the current mp3 disc in any desired order. 1 during stop mode, press the p.mode key on the remote p.mode 3 you can select maximum 1025 values by repeating step 2 . program edit 4 press play key to start program playback. ? program playback will play back repeatedly. delete program 1 during stop mode, press cursor left/ right ( 2 / 3 ) keys on the remote to select the all clear icon, then press the enter key. ? the program deletes. ? you can delete file one by one by selecting and pressing clear key on the remote. madonna lucky-1 likea-1 likea-1 true-1 lucky-1 open-1 holiday into-1 whihe-1 every-1 all crear lucky-1 true-1 open-1 whihe-1 holiday into-1 0:04:56 madonna lucky-1 likea-1 likea-1 true-1 lucky-1 open-1 holiday into-1 whihe-1 every-1 all crear lucky-1 true-1 open-1 whihe-1 holiday into-1 0:04:56 madonna lucky-1 likea-1 likea-1 true-1 lucky-1 open-1 holiday into-1 whihe-1 every-1 all crear lucky-1 true-1 open-1 whihe-1 holiday into-1 0:04:56 multi control enter www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 40 knowledge dv-505/dvf-r4050(en) dvd menu language code list cord no. language 6565 6566 6570 6577 6582 6583 6588 6590 6665 6669 6671 6672 6678 6679 6682 6765 6779 6783 6789 6865 6869 6890 6976 6978 6979 6983 6984 6985 7065 7073 7074 7079 7082 7089 7165 7168 7176 7178 7185 7265 7273 afar abkhazian afrikaans amharic arabic assamese aymara azerbaijani bashkir byelorussian bulgarian bihari bengali; bangla tibetan breton catalan corsican czech welsh danish german bhutani greek english esperanto spanish estonian basque persian finnish fiji faroese french frisian irish scots gaelic galician guarani gujarati hausa hindi cord no. language 7282 7285 7289 7365 7378 7383 7384 7387 7465 7473 7487 7565 7575 7576 7577 7578 7579 7583 7585 7589 7665 7678 7679 7684 7686 7771 7773 7775 7776 7778 7779 7782 7783 7784 7789 7865 7869 7876 7879 7982 8065 croatian hungarian armenian interlingua indonesian icelandic italian hebrew japanese yiddish javanese geogian kazakh greenlandic cambodian kannada korean kashmiri kurdish kirghiz latin lingala laothian lithuanian latvian; lettish malagasy maori macedonian malayalam mongolian moldavian marathi malay maltese burmese nauru nepali dutch nowegian oriya punjabi cord no. language 8076 8083 8084 8185 8277 8279 8285 8365 8368 8372 8373 8375 8376 8377 8378 8379 8381 8382 8385 8386 8387 8465 8469 8471 8472 8473 8475 8476 8479 8482 8484 8487 8575 8582 8590 8673 8679 8779 8872 8979 9072 9085 polish pashto; pushto portuguese quechua rhaeto-romance romanian russian sanskrit sindhi serbo-croatian singhalese slovak slovenian samoan shona somali albanian serbian sundanese swedish swahili tamil telugu tajik thai tigrinya turkmen tagalog tonga turkish tatar twi ukrainian urdu uzbek vietnamese volapk wolof xhosa yoruda chinese zulu knowledge dimmer function the display brightness of the main unit can be changed. switching as shown below is done each time the dimmer key on the remote control is pressed. 1 dim 2 not lit 3 bright dimmer www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 41 knowledge dv-505/dvf-r4050(en) ? load a disc and press the play ( 3 ) key. ? turn the disc over and properly place it on the disc tray. ? turn on the tv. ? properly reconnect the connection cords. ? this is not a malfunction. ? properly connect the audio cords. ? set the sound volume to an appropriate level. ? press the play ( 3 ) key to resume normal playback mode. ? separate this unit as far as possible from the device you think is generating the noise. ? refer to the disc handling precautions sec- tion and wipe dirt from the disc. ? use a new disc. ? refer to the beware of condensation sec- tion and evaporate the condensation. ? approximately 10 to 20 seconds are required for a disc to start playing, although the time differs depending on the disc. ? properly place the disc on the tray. ? refer to the video formats section ,and use a disc with the appropriate video format for your tv or a tv with the appropriate video format for the disc. ? the subtitle cannot be displayed when the dvd disc being played does not contain the recording of subtitles. ? press the sub title-on/off key to switch on the subtitle mode. ? the voice (or subtitle) language cannot be changed when the dvd disc being played does not contain the recording of more than one voice (or subtitle) language. ? the viewing angle cannot be changed when the dvd disc being played does not contain the recording of more than one angle. ? more than one viewing angle may be re- corded only in limited sections in a disc. in case of difficulty operation to reset the microprocessor may fall into malfunction (impossibility to operate erroneous display, etc.) when the power cord is unplugged while power is on or due to an external factor. in this case, execute the following procedure to reset the microprocessor and return it to normal condition. ? please note that resetting the microprocessor clears the contents stored in, it returns the microprocessor to the condi- tion when it left the factory. what appears to be a malfunction may not always be serious. if your unit should not perform as expected, consult the table below to see if the problem can be corrected before seeking help from your dealer or service representative. ? there is no disc in the player. ? there are no signals recorded on the side of the disc being played. ? the tv is not turned on. ? the connection cords are not properly con- nected. ? the picture is slightly disrupted during fast forward and fast reverse operations. ? the audio output cords are not properly con- nected. ? the volume control of the tv or amplifier is not adjusted properly. ? the player is in a special playback mode. ? a nearby device is generating noise. ? the disc is dirty. ? the disc is damaged. ? there is condensation on the optical lens. ? time is required for the unit to detect the disc type and size and for the rotation of the motor to stabilize. this is not a malfunction. ? the disc is not placed horizontally. ? the video format of the disc being played does not match that of the connected tv monitor. ? the dvd disc being played does not contain the recording of subtitles. ? the subtitle mode is set to off. ? the dvd disc being played does not contain the recording of more than one audio (or subtitle) language. ? the dvd disc being played does not contain the recording of more than one angle. ? you are attempting to switch the angle in a dvd section where more than one angle is not re- corded. remedy cause dvd player unit symptom playback does not start when the play ( 3 ) key is pressed. playback starts but no image/sound is seen/ heard. the picture is disrupted when the image is fast forwarded or fast reversed. no sound is heard. the picture does not look good or the pic- ture/sound quality is poor. it takes a while for the disc to start playing. the tray opens automatically. the top and bottom of the screen cannot be seen. the subtitle is not displayed. the voice (or subtitle) language cannot be changed. the viewing angle cannot be changed. 1 in power on condition, keep the disc 3 key and the 4 4 4 4 4 (skip) key pressed at the same time. 2 when both keys are pressed, the region code of the unit, the software version, etc. will be displayed on the display. (when nothing is done, the display of this information continues.) example: 71 . 101 . 06:14 3 press the on/off key to go to power off. 4 when power on is performed with the on/off key, the settings become the default factory settings. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 42 knowledge dv-505/dvf-r4050(en) ? a viewing restriction (rating) has been set for the disc. ? you have forgotten the viewing restriction (rat- ing) password. ? the dvd disc being played does not contain the recording of the selected voice or subtitle lan- guage. ? the function for displaying message on the tv screen (on-screen messages) is set to off. ? the menu language function (menu) is not set. ? dvd disc cannot be played when the sequential mode of the player is set to seq.2 . ? menu playback is not available when p.b.c. is off or the sequential play mode of the player is set to seq.2 . ? the operation is inhibited. please try an- other operation. the inhibition icon is displayed and remote control is not pos- sible. ? playback is restricted intentionally by the soft- ware producer. in case of difficulty dvd player unit ? check the viewing restriction level (rating) setting. ? set the initial setup to the factory setup with the following procedure. 1 in power on condition, keep the disc 3 key and the 4 4 4 4 4 (skip) key key pressed at the same time. 2 when both keys are pressed, the region code of the unit, the software version, etc. will be displayed on the display. (when nothing is done, the display of this information continues.) 3 press the on/off key to go to power off. 4 when power on is performed with the on/off key, the settings become the default factory settings. ? use a dvd disc containing the recording of the selected voice or subtitle language. ? set on-screen messages to on. ? set the disc menu language function (menu) as required. ? switch it to seq.1 . ? switch it to p.b.c. on or seq.1 . playback will not start even after a title is selected. the viewing restriction level (rating) can- not be changed. the voice or subtitle language selected in the initial setting is not played. no message appears on the tv screen after a key is pressed. menu screen messages are not shown in the desired language. dvd disc cannot be played. p.b.c.-compatible vcd cannot be played with menu playback. remedy cause symptom remote control unit symptom cause remedy remote control operation is not possible. ? batteries are exhausted. ? the remote control is too far away from the system, the controlling angle is deviated or there is an obstacle in between. ? replace with new batteries. ? operate the unit inside the remote control- lable range. symptom cause remedy inhibition icon apparatus claims of u.s. patent nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited viewing uses only. this product is compatible with the macrovision type copy protection. some discs contain the recording of copy inhibit signals, and the video may be disturbed when the video of such discs is recorded onto a vcr and played back. this product incorporates copyright protection technology that is pro- tected by method claims of certain u.s. patents and other intellec- tual property right owned by macrovision corporation and other rights owners. use of this copyright protection technology must be author- ized by macrovision corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by macrovision corporation. reverse engineering or disassembly is prohibited. it is prohibited by laws to duplicate, broadcast, perform in public or rent a disc without the permission of the copyright owners. manufactured under license from dolby laboratories. dolby, ac-3, pro logic, and the double-d symbol are trademarks of dolby laboratories. confidential unpublished works. ? 1992- 1997 dolby laboratories. all rights reserved. dts and dts digital surround are trademarks of digital theater systems, inc. www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet 43 knowledge dv-505/dvf-r4050(en) notes notes notes specifications [type] system ................................................. dvd video player system signal read system ..................................... semiconductor laser [d/a conversion section] d/a conversion ..................................................................... 24 bit oversampling .............. 8 fs (sampling frequency; 44.1, 48 khz) 4 fs (sampling frequency; 96 khz) [audio section] frequency response sampling frequency ; 44.1 khz ...................... 4 hz ~ 20 khz sampling frequency ; 48 khz .......................... 4 hz ~ 22 khz sampling frequency ; 96 khz .......................... 4 hz ~ 42 khz signal to noise ratio .......................................... more than 98 db dynamic range ................................................... more than 95 db total harmonic distortion .................. less than 0.005 % (1 khz) channel separation .............................. more than 95 db (1 khz,) wow and flutter ................................... below measurable limit analog output level/impedance ................................... 2 v / 1 k w digital output level/impedance coaxial ......................................................... 0.5 vp-p / 75 w optical ............ -21 dbm ~ -15 dbm (wave length 660 nm) [video section] video output format .................................................... ntsc/pal video compression dvd .............................................................................. mpeg-2 composite video output level ......................................... 1 vp-p (75 w load, sync. negative) s-video output level (y-signal) ......................... 1 vp-p (75 w load, sync. negative) (c-signal) ntsc ...................................................... 0.286 vp-p (75 w ) pal ......................................................... 0.300 vp-p (75 w ) horizontal resolution ................................... more than 480 lines video signal to noise ratio ................................ more than 60 db [general] power consumption .............................................................. 20 w dimensions ................................................. w:440 mm (17-5/16) h: 127 mm(5) d: 440 mm (17-5/16) weight (net) ........................................................... 6.8 kg (15.0 lb) kenwood follows a policy of continuous advancements in development. for this reason specifications may be changed without notice. ? sufficient performance may not be exhibited at extremely cold locations (where water freezes). www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet for your records record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. refer to the model and serial numbers whenever you call upon your dealer for information or service on this product. model serial number www.datasheet www.datasheet www.datasheet www.datasheet 4u 4u4u 4u .com .com .com .com 4 .com u datasheet |
Price & Availability of DVF-505
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |