5 8 3 6 14.0 13.0 6.50 3.5 6.80 2.60 6.80 5.50 ? 1.20 4.70 recommended pcb layout 13.50 0.90 (bottom view) 3 8 7 2 5 4 1 8.50 2.50 6 3- ? 2.20 7 2 1 4 0.90 2.60 1 3 6 7 8 5 4 2 ferrite filter 11.5 6.2 ferrite filter 1.2 13.70 5 4.70 8 6.80 13.50 5.50 4.70 ? 1.20 1.30 6.80 2.50 6.80 2.50 5 13.50 4.70 13.50 ? 2.20 8.50 8 5 6 3 5.50 5 8 3 6 8.50 8 5 1 6 3 ? 2.20 5.50 6 1 8 3 5 2 8 6.80 2.60 13.50 0.90 2.50 6.80 0.90 2.50 2.60 7 13.50 2.60 8.50 3 6 2 1 ? 2.20 5.50 4.70 ? 1.20 8 2 5 3 1 6 5 2 7 8 4.70 8.50 6 1 3 ? 2.20 5.50 ? 1.20 7 8 5 2 3 1 6 2 8 5 7 4 2.50 8.50 6 4 3 1 ? 2.20 1 6 3 8.50 5.50 4.70 2.50 12.8 recommended pcb layouts (bottom view) 0.90 6.80 2.50 13.50 4.70 5.50 7 5 5 7 8.50 3 ? 2.20 3 ? 1.20 ? 1.20 ? 1.20 2 amp at 12v dc 500v ac rms for 1 minute current rating: 500 megaohms min. at 500 vdc tin/lead on soldertails, all over nickel underplate -30 option: 30u" gold on contacts, all over nickel underplate tin/lead on soldertails, standard: gold flash on contacts, contact plating options: ul94v-0 rated, black shield: brass, tin-lead plated contact material: phosphor bronze body: pbt thermoplastic, plug to shield: 100 milliohms max. plug to terminals: 60 milliohms max. plug to terminals: 30 milliohms max. plug to shield: 50 milliohms max. dielectric withstanding voltage: insulation resistance: after test: before test: contact resistance: operating temperature: -55c to +85c 100 mhz 20-22 ohms 50 mhz 15-18 ohms 30 mhz 13-15 ohms frequency impedance - z (ohms) durability test: 500 cycles min. insertion force: 4.57kg max extraction force: 0.9kg - 3.0kg x.xx 0.15 otherwise unless stated x.x 0.25 tolerances kfmdg-xs-bs30 part number kfmdg-xs-bs 30u" gold (30 option) gold flash (standard) contact area plating finish
|
