6.80 4 position 13.50 8.50 ? 2.20 5.50 4.70 14.0 13.0 6.50 8.50 5.50 4.70 3.180.30 12.8 11.00 11.00 8 position 2.20 5 position 6.80 ? 0.90 4.70 ? 2.20 8.50 0.90 6.80 3 position 7 position 0.90 6 position 2.60 6.80 1.30 2.60 13.50 5.50 13.50 8.50 ? 2.20 5.50 4.70 13.50 8.50 ? 2.20 5.50 4.70 13.50 8.50 ? 2.20 5.50 4.70 11.00 11.00 11.00 11.00 6.80 2.00 6.80 13.70 6.80 recommended pcb layout (bottom view) 0.90 4.70 5.50 ? 0.90 11.00 8.50 2.60 13.50 3- ? 2.20 ? 0.90 ? 0.90 ? 0.90 ? 0.90 revision date description drawn by rev check by units date rev check date revised by dielectric withstanding voltage: plug to terminals: 60 milliohms max. plug to terminals: 30 milliohms max. extraction force: 0.4kg - 3.5kg insertion force: 4.5kg max. durability test: 500 cycles min. operating temperature: -25c to +85c resistance to soldering heat: 1705c 500v ac rms for 1 minute contacts: phosphor bronze shield: brass, tin/lead plated gold flash or 30u" all over nickel underplate tin/lead on termination, for 51 seconds insulation resistance: current rating: 500 megohms min. at 500 vdc 2 amp at 12v dc max. after test: body: pbt thermoplastic, ul94v-0 rated, black contact resistance: before test: kmdg-3s-bs30 part number kmdg-3s-bs 30u" flash t_gold kmdg-4s-bs30 kmdg-4s-bs KMDG-5S-BS30 KMDG-5S-BS kmdg-6s-bs30 kmdg-6s-bs kmdg-7s-bs30 kmdg-7s-bs kmdg-8s-bs kmdg-8s-bs30 30u" flash 30u" flash 30u" flash 30u" flash 30u" flash gold on contact area, x.xx 0.15 otherwise unless stated x.x 0.25 tolerances c lr78160 us r
|
