low cost smt high pass filter 800 - 3000 mhz FLO5-0001-G preliminary speci?ations v2.00 m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 (03) 3226-1671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 (03) 3226-1451 fax +44 (1344) 300 020 1 the preliminary speci?ations data sheet contains typical electrical speci?ations which may change prior to final introduction. parameter units min. typ. max. insertion loss: 800 - 3000 mhz db 0.5 1.0 vswr: 800 - 3000 mhz 1.5:1 1.8:1 rejection: dc - 400 mhz 15 20 typical electrical speci cations 1 , t a = +25? features small size and low pro?e industry standard soic-8 smt plastic package superior repeatability typical insertion loss 0.5 db typical rejection 20 db 2 watt power handling description m/a-com? FLO5-0001-G is an ic based monolithic high pass ?ter in a low cost soic-8 plastic package. this ?ter is ideally suited for applications where small size, low cost and low loss are required. typical applications include base station switching net- works and portable phones where size and pcb real estate are at a premium. available in tape and reel. the FLO5-0001-G is fabricated using a passive-integrated circuit process. the process features full chip passivation for increased performance and reliability. 1. all speci?ations apply with 50 - ohm source and load impedance. so-8 0?8 .0075-0.0098
(0.19-0.25) .1890-.1968
(4.80-5.00) .0099-0.0196
x 45?chamfer
(0.25-0.50)
.2284-.2440
(5.80-6.20)
pin 8 orientation
mark pin 1 .1497-.1574
(3.80-4.00) - b - - a - .050(1.27) bsc. .013-.020 typ.
(0.33-0.51) .0040-.0098
(0.10-0.25) - c - .0532-.0688
(1.35-1.75) .016-.050
(0.40-1.27) .010(0.25) m b m .010(0.25) m c a m b s .004 (0.10) part number package FLO5-0001-G soic 8-lead plastic package FLO5-0001-G-tr forward tape and reel* FLO5-0001-G-rtr reverse tape and reel* ordering information * if speci? reel size is required, consult factory for part number assignment. l l l l l l 8- lead sop outline dimensions narrow body .150 (all dimensions per jedec no. ms-012-aa, issue c) dimensions in ( ) are in mm. unless otherwise noted: .xxx = 0.010 (.xx = 0.25) .xx = 0.02 (.x = 0.5)
low cost smt high pass filter FLO5-0001-G v2.00 m/a-com, inc. north america: tel. (800) 366-2266 n asia/paci?: tel. +81 (03) 3226-1671 n europe: tel. +44 (1344) 869 595 fax (800) 618-8883 fax +81 (03) 3226-1451 fax +44 (1344) 300 020 2 the preliminary speci?ations data sheet contains typical electrical speci?ations which may change prior to final introduction. parameter absolute maximum input power 2 w cw operating temperature - 40? to + 85? storage temperature - 65? to + 150? absolute maximum ratings 1 recommended pcb con?uration typical performance @ +25? functional diagram 1. exceeding these limits may cause permanent damage. .050 plated thru (2x) rf out rf in .016 plated thru (16x) .030 typ. .036 typ. .067 typ. .113 .244 .072 1 8 4 5 rf in rf out gnd gnd gnd gnd gnd gnd circuit material: fr-4, .016 thick. all unused pins must be rf and dc grounded. pins 1 and 4 are thermal ground contacts. 0 -5 -10 -15 -20 -25 -30 0 300 600 900 1200 1500 1800 2100 2400 2700 0 300 600 900 1200 1500 1800 2100 2400 2700 3000 insertion loss db frequency mhz insertion loss vs frequency 2 1.8 1.6 1.4 1.2 1 vswr frequency mhz vswr vs frequency
|
