features ? typical isolation: 33 db (2,000 mhz) ? typical insertion loss: 1.6 db (2,000 mhz) ? integral asic ttl/cmos driver ? plastic, 50 mil pitch, sow-24 lead, wide body ? low dc power consumption ? 50 ohm nominal impedance ? tape and reel packaging available ? test boards available description m/a-com's sw65-0314 is a gaas mmic absorptive sp4t switch with an integral silicon asic driver. this device is in a 24-lead plastic package. this switch offers excellent broadband performance and repeatability from dc to 3 ghz, while maintaining low dc power dissipation. the sw65-0314 is ideally suited for wireless infrastructure applications. also available in a ceramic package with improved performance. 1. check with factory for available quantities and reel size. ordering information electrical specifications: t a = +25c parameter test conditions units min typical max insertion loss dc - 1.0 ghz dc - 2.0 ghz dc - 3.0 ghz db db db ? ? ? 1.5 1.6 2.0 1.7 1.8 2.3 isolation (all arms off) dc - 1.0 ghz dc - 2.0 ghz dc - 3.0 ghz db db db 35 30 25 38 33 27 ? ? ? vswr dc - 1.0 ghz dc - 2.0 ghz dc - 3.0 ghz ? ? ? ? ? ? on off 1.3:1 1.3:1 1.5:1 1.7:1 1.7:1 2.2:1 1.5:1 2.0:1 2.4:1 t rise t fall t on t off transients 10%/90%, 90%/10% 2 50% ttl to 90%/10% rf in-band (peak to peak) ns ns mv ? ? ? 15 50 50 50 150 150 1 db compression .05 ghz .5 - 3.0 ghz dbm dbm ? ? +20 +27 ? ? sow-24 package outline conforms to jedec standard ms-013ad. part number package sw65-0314 bulk packaging sw65-0314tr tape and reel 1 sw65-0314-tb units mounted on test board gaas sp4t absorptive switch with asic driver dc - 3.0 ghz sw65-0314 north america: tel. (800) 366-2266, fax (800) 618-8883 asia/pacific: tel.+81-44-844-8296, fax +81-44-844-8298 europe: tel. +44 (1344) 869 595, fax+44 (1344) 300 020 specifications subject to change without notice. visit www.macom.com for additional data sheets and product information. v 3.00
parameter absolute maximum max. input power 0.05 ghz 0.5 - 3.0 ghz +27 dbm +34 dbm bias voltages v ee v cc control voltage -8.5v +5.5v -0.5v to v cc +0.5v operating temperature -40c to +85c storage temperature -65c to +125c absolute maximum ratings 3,4 parameter test conditions units min typical max input ip 3 two tone inputs 0.05 ghz up to +5 dbm 0.5 - 3.0 ghz dbm dbm ? ? +35 +46 ? ? v cc ? v +4.5 +5.0 +5.5 v ee ? v -8.0 -5.0 -4.75 i cc v cc = +5.0v ma ? 0.2 6 i ee v ee = -5.0v ma ? -0.2 -1 logic ?0? i in = 20a max v 0.0 ? 0.8 logic ?1? i in = 20a max v 2.0 ? 5.0 electrical specifications: t a = +25c ttl control input c1 c2 c3 c4 rf1 rf2 rf3 rf4 1 0 0 0 on off off off 0 1 0 0 off on off off 0 0 1 0 off off on off 0 0 0 1 off off off on rf common to: truth table 2. decoupling capacitors (.01 f) are required on the power supply lines. 3. operation of this device above any one of these parameters may cause permanent damage. 4. when the rf input is applied to the terminated port, the absolute maximum power is +30 dbm. pin # function pin # function 1 rfc 13 c1 2 gnd 14 c3 3 rf4 15 gnd 4 gnd 16 gnd 5 gnd 17 gnd 6 rf2 18 gnd 7 gnd 19 rf1 8 v ee 20 gnd 9 gnd 21 gnd 10 v cc 22 rf3 11 c4 23 gnd 12 c2 24 gnd pin configuration north america: tel. (800) 366-2266, fax (800) 618-8883 asia/pacific: tel.+81-44-844-8296, fax +81-44-844-8298 europe: tel. +44 (1344) 869 595, fax+44 (1344) 300 020 specifications subject to change without notice. visit www.macom.com for additional data sheets and product information. v 3.00 gaas sp4t absorptive switch with asic driver dc - 3.0 ghz sw65-0314
|
