telephone +44 (0)1229 582430 fax: +44 (0)1229 585155 email: sales@marl.co.uk website: www.marl.co.uk website: www.marl-leds.com leds leds professional led indicators - 12 .7mm mounting mlq = 10 dimensions in mm (typical) scale 1:1 514 series bright nickel plated brass housing robust termination tags accept push- on connectors ac versions available sealed to ip67 * = voltage dc for 20ma product is vf@20ma, not vopr please note - this product is also available at 24, 28, and 110vdc, 110 and 230vac. indicators supplied at voltages above 75vdc must be used with insulated terminations or ordered with flying leads to comply with the low voltage directive. please contact our sales department for further details. ordering information & typical technical characteristics (ta = 25?) mean time between failure = 100,000 hours. luminous intensity figures refer to the unmodified discrete led . led products can be static sensitive high intensity part number colour lens voltage current luminous wave viewing operating storage dc dc intensity length angle temp temp vopr lopr lv@20ma l p topr tstg standard intensity 514-105-04 red 2.0* 20 90 625 514-111-04 yellow 2.1* 20 40 590 514-114-04 green 2.2* 20 40 565 514-105-21 red 12 20 90 625 514-111-21 y ellow coloured diffused 12 20 40 590 wide -20~+60 -30~+85 514-114-21 green 12 20 40 565 514-105-2 2 red 24 20 90 625 514-111-22 y ellow 24 20 40 590 514-114-22 green 24 20 40 565 514-102-04 red 1.9* 20 500 660 514-102-21 red coloured diffused 12 20 500 660 wide -20~+60 -30~+85 514-102-22 red 24 20 500 660 units vdc ma mcd nm ? ? standard intensity anode termination indicated by red sleeve section 4; pro led ind for pdfs 19/1/00 7:37 pm page 14
|
