138 t antalum electrolytic capacitors hitachi aic inc. tmcm test conditions jis c5101-1:1998 operating temperature range ?5? ~ +125? rated voltage dc2.5 ~ 35v 85? surge voltage dc3.2 ~ 45v 85? derated voltage dc1.6 ~ 22v 125? capacitance 0.47 ~ 470? capacitance tolerance ?0% or 20% paragraph 4.7, 120 hz leakage current tan paragraph 4.8, 120hz paragraph 4.26 thermal shock failure rate 1% / 1000hours tmcm series (miniaturized tantalum chip capacitors with extended capacitance range) features ?a model type miniaturized chip capacitor developed on the basis of tmcs production technology ideal for high density component mounting applied in av equipment. ? super compact : reduced size 1/2 to 1/3 in comparison with tmcs. outline of drawings and dimensions anode indication belf mark e case a, b, c case a a a l h w w product symbol : (example) tmcm series a case 7v 10 f 20% terminal code packing polarity code packing method code (t:carrier tape) capacitance tolerance code (m : 20%) capacitance code rated voltage code case size code tmcm a 0j 106 m t r f type of series case case size code l ?.2 w ?.2 h ?.2 r ?.3 a ?.2 a 3.2 1.6 1.6 0.7 1.2 b 3.5 2.8 1.9 0.8 2.2 c 5.8 3.2 2.5 1.3 2.2 e 7.3 4.3 ?.3 2.8 1.3 2.4 dimensions (unit : mm) standard value and case size specified initial value ?5 85 125 c/c ? 10 ~ 0% 0 ~ +10% 0 ~ +12% tan 0.04 0.09 0.07 0.09 value shown table 0.06 0.10 0.08 0.10 or less 0.08 0.12 0.10 0.12 0.10 0.14 0.12 0.14 0.12 0.16 0.14 0.16 0.16 0.20 0.18 0.20 0.18 0.34 0.20 0.22 0.20 0.36 0.22 0.24 0.30 0.60 0.30 0.40 lc 3 f g f s u p p s m f t t p s m f t t standard specified intial specified intial q s p e v d u u b c m f w b m v f p s m f t t w b m v f p s m f t t refer to table standard porduct table c/c 5% or less tan specified initial value or less lc specified initial value or less refer to table standard porduct table paragraph 4.9, in 5 minutes after the rated voltage is applied. c/c 5% or less tan specified initial value or less lc specified initial value or less c/c 10% or less tan specified initial value or less lc specified initial value or less c/c 10% or less tan specified initial value or less lc 125% specified initial value or less c/c 10% or less tan specified initial value or less lc specified initial value or less c/c 10% or less tan 150% specified initial value or less lc 200% specified initial value or less product specifications paragraph 4.24 solder dip 260?? a, b case c, e case 10? sec. 5?.5 sec. reflow?60? 10? sec. paragraph 4.22, 40? 90 ~ 95%rh,500hours leave at -55?, normal temperature, 125?, and normal temperature for 30 min., 3 min., 30 min., and 3 min. repeat this operation 5 times running. 40?, humidity 90 to 95%rh the rated voltage is applied for 500 hours. paragraph 4.23, 85? the rated voltage is applied for 2000 hours. 85?. the rated voltage is applied (through a protective resistor of 1 ? /v). capacitance f code rated voltage (v.dc) & |