View PS710CL2-1A_1360024.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet the information in this document is subject to change without notice. before using this document, please confirm that this is the latest version. not all devices/types available in every country. please check with local nec compound semiconductor devices representative for availability and additional information. 4-pin dip, 0.1 w w w w low on-state resistance 2.0 a continuous load current 1-ch optical coupled mos fet solid state relay ocmos fet PS710CL2-1A document no. pn10164ej01v0ds (1st edition) date published june 2002 cp(k) printed in japan ? ? ? ? nec compound semiconductor devices 2002 - nepoc series - description the PS710CL2-1A is a solid state relay containing a gaas led on the input side and mos fets on the output side. it is suitable for plc, etc. because of its large continuous load current and low on-state resistance. the PS710CL2-1A has a surface mount type with 10.16 mm lead pitch. features ? low on-state resistance (r on = 0.1 w typ.) ? large continuous load current (i l = 2.0 a) ? 1 channel type (1 a output) ? low led operating current (i f = 2 ma) ? designed for ac/dc switching line changer ? small package (4-pin dip) ? low offset voltage ? ordering number of taping product: PS710CL2-1A-e3, e4 applications ? measurement equipment ? fa equipment
data sheet pn10164ej01v0ds 2 PS710CL2-1A package dimensions (unit: mm) 9.250.5 6.5 0.30.3 0.750.5 11.80.4 3.50.3 0.5 max. 1.340.1 0.25 m 2.54 PS710CL2-1A 1. led anode 2. led cathode 3. mos fet drain 4. mos fet drain 1 *1 *1 *1 2 43 top view 10.16 *1 cut the lead
data sheet pn10164ej01v0ds 3 PS710CL2-1A marking example no. 1 pin mark ps710c-1a ne000 nothing e solder dipping solder plating country assembled assembly lot n week assembled year assembled (last 1 digit) in-house code rank code 0 00
data sheet pn10164ej01v0ds 4 PS710CL2-1A ordering information part number package packing style application part number *1 PS710CL2-1A 4-pin dip magazine case 50 pcs PS710CL2-1A PS710CL2-1A-e3 embossed tape 1 000 pcs/reel PS710CL2-1A-e4 *1 for the application of the safety standard, following part number should be used.
data sheet pn10164ej01v0ds 5 PS710CL2-1A absolute maximum ratings (t a = 25 c, unless otherwise specified) parameter symbol ratings unit diode forward current (dc) i f 50 ma reverse voltage v r 5.0 v power dissipation p d 50 mw peak forward current *1 i fp 1a mos fet load voltage v l 60 v continuous connection a i l 2.0 a load current *2 pulse load current *3 (ac/dc connection) i lp 4.0 a power dissipation p d 600 mw isolation voltage *4 bv 1 500 vr.m.s. total power dissipation p t 650 mw operating ambient temperature t a - 40 to +85 c storage temperature t stg - 40 to +100 c *1 pw = 100 m s, duty cycle = 1% *2 conditions: i f 3 2 ma. the following types of load connections are available. connection a v l (ac/dc) 1 4 3 2 i l l *3 pw = 100 ms, 1 shot *4 ac voltage for 1 minute at t a = 25 c, rh = 60% between input and output
data sheet pn10164ej01v0ds 6 PS710CL2-1A recommended operating conditions (t a = 25 c) parameter symbol min. typ. max. unit led operating current i f 21020ma led off voltage v f 00.5v electrical characteristics (t a = 25 c) parameter symbol conditions min. typ. max. unit diode forward voltage v f i f = 10 ma 1.2 1.4 v reverse current i r v r = 5 v 5.0 m a mos fet off-state leakage current i loff v d = 60 v 1.0 m a output capacitance c out v d = 0 v, f = 1 mhz 320 pf coupled led on-state current i fon i l = 2.0 a 2.0 ma on-state resistance r on i f = 10 ma, i l = 2.0 a, t 10 ms 0.1 0.15 w turn-on time *1, 2 t on i f = 10 ma, v o = 5 v, r l = 500 w ,1.03.0ms turn-off time *1, 2 t off pw 3 10 ms 0.05 1.0 isolation resistance r i-o v i-o = 1.0 kv dc 10 9 w isolation capacitance c i-o v = 0 v, f = 1 mhz 0.5 pf *1 test circuit for switching time v l r l i f r in pulse input input monitor monitor v o output input t on t off 10% 90% 0 v o = 5 v 50% *2 the turn-on time and turn-off time are specified as input-pulse width 3 10 ms. be aware that when the device operates with an input-pulse width of under 10 ms, the turn-on time and turn-off time will increase.
data sheet pn10164ej01v0ds 7 PS710CL2-1A typical characteristics (t a = 25 c, unless otherwise specified) 100 75 50 25 0 C25 20 60 80 100 40 0 ambient temperature t a (?c) maximum forward current i f (ma) maximum forward current vs. ambient temperature ambient temperature t a (?c) maximum load current i l (a) maximum load current vs. ambient temperature i f = 50 ma 30 ma 20 ma 10 ma 5 ma 1 ma 100 75 50 25 0 C25 1.2 1.4 1.6 1.0 0.8 ambient temperature t a (?c) forward voltage v f (v) forward voltage vs. ambient temperature f = 1 mhz 120 100 80 40 20 60 100 300 400 500 200 0 applied voltage v d (v) output capacitance c out (pf) output capacitance vs. applied voltage 100 85 75 50 25 0 C25 0.5 1.5 2.0 3.0 1.0 0.0 2.5 load voltage v l (v) load current i l (a) load current vs. load voltage i f = 10 ma C1.0 C2.0 1.0 2.0 3.0 C3.0 C0.30 C0.15 0.15 0.30 C0.45 0 0.45 off-state leakage current i loff (a) ambient temperature t a (?c) off-state leakage current vs. ambient temperature 10 C6 10 C11 10 C8 10 C7 10 C9 10 C10 020406080 v d = 60 v 85
data sheet pn10164ej01v0ds 8 PS710CL2-1A n = 50 pcs, i f = 10 ma, v o = 5 v, r l = 500 w turn-on time t on (ms) number (pcs) turn-on time distribution forward current i f (ma) turn-on time t on (ms) turn-on time vs. forward current forward current i f (ma) turn-off time t off (ms) turn-off time vs. forward current n = 50 pcs, i f = 10 ma, v o = 5 v, r l = 500 w 0.08 0.04 5 20 25 30 10 0 15 turn-off time t off (ms) number (pcs) turn-off time distribution normalized to 1.0 at t a = 25?c, i f = 10 ma, i l = 2.0 a 100 75 50 25 0 C25 0.5 2.0 2.5 3.0 1.0 0.0 1.5 ambient temperature t a (?c) normalized on-state resistance r on normalized on-state resistance vs. ambient temperature n = 50 pcs, i f = 10 ma, i l = 2.0 a, t 10 ms on-state resistance r on ( w ) number (pcs) on-state resistance distribution 0.11 0.10 5 15 25 30 10 0 20 40 30 20 10 4.0 6.0 8.0 2.0 0 v o = 5 v, r l = 500 w 40 20 10 30 0.1 0.3 0.4 0.5 0.2 0 v o = 5 v, r l = 500 w 2.0 1.0 5 20 25 30 10 0 15
data sheet pn10164ej01v0ds 9 PS710CL2-1A normalized to 1.0 at t a = 25?c, i f = 10 ma, v o = 5 v, r l = 500 w 100 0 C25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 normalized turn-on time t on ambient temperature t a (?c) normalized turn-on time vs. ambient temperature normalized to 1.0 at t a = 25?c, i f = 10 ma, v o = 5 v, r l = 500 w 100 0 C25 25 50 75 2.5 3.0 0.0 2.0 1.5 1.0 0.5 normalized turn-off time t off ambient temperature t a (?c) normalized turn-off time vs. ambient temperature remark the graphs indicate nominal characteristics.
data sheet pn10164ej01v0ds 10 PS710CL2-1A taping specifications (unit: mm) outline and dimensions (tape) 2.050.05 2.00.1 4.00.1 1.55 1.750.1 4.6 max. 12.50.1 0.3 11.50.1 24.00.3 10.40.1 12.00.1 outline and dimensions (reel) packing: 1 000 pcs/reel 2.00.5 r 1.0 13.00.5 f 21.00.8 f tape direction PS710CL2-1A-e3 PS710CL2-1A-e4 +0.1 C0 3302.0 1001.0 2.00.5 f f 23.9 to 27.4 outer edge of flange 29.51.0 25.51.0
data sheet pn10164ej01v0ds 11 PS710CL2-1A recommended soldering conditions (1) infrared reflow soldering ? peak reflow temperature 260 c or below (package surface temperature) ? time of peak reflow temperature 10 seconds or less ? time of temperature higher than 220 c 60 seconds or less ? time to preheat temperature from 120 to 180 c 120 30 s ? number of reflows three ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) 220?c package surface temperature t (?c) time (s) (heating) to 10 s to 60 s 260?c max. recommended temperature profile of infrared reflow 12030 s (preheating) 180?c 120?c (2) wave soldering ? temperature 260 c or below (molten solder temperature) ? time 10 seconds or less ? preheating conditions 120 c or below (package surface temperature) ? number of times one ? flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt% is recommended.) (3) cautions ?fluxes avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
data sheet pn10164ej01v0ds 12 PS710CL2-1A m8e 00. 4 - 0110 the information in this document is current as of june 2002. the information is subject to change without notice. for actual design-in, refer to the latest publications of nec's data sheets or data books, etc., for the most up-to-date specifications of nec semiconductor products. not all products and/or types are available in every country. please check with an nec sales representative for availability and additional information. no part of this document may be copied or reproduced in any form or by any means without prior written consent of nec. nec assumes no responsibility for any errors that may appear in this document. nec does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of nec semiconductor products listed in this document or any other liability arising from the use of such products. no license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of nec or others. descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. the incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. nec assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. while nec endeavours to enhance the quality, reliability and safety of nec semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. to minimize risks of damage to property or injury (including death) to persons arising from defects in nec semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. nec semiconductor products are classified into the following three quality grades: "standard", "special" and "specific". the "specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. the recommended applications of a semiconductor product depend on its quality grade, as indicated below. customers must check the quality grade of each semiconductor product before using it in a particular application. "standard": computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "special": transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "specific": aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. the quality grade of nec semiconductor products is "standard" unless otherwise expressly specified in nec's data sheets or data books, etc. if customers wish to use nec semiconductor products in applications not intended by nec, they must contact an nec sales representative in advance to determine nec's willingness to support a given application. (note) (1) "nec" as used in this statement means nec corporation, nec compound semiconductor devices, ltd. and also includes its majority-owned subsidiaries. (2) "nec semiconductor products" means any semiconductor product developed or manufactured by or for nec (as defined above).
nec compound semiconductor devices hong kong limited hong kong head office taipei branch office korea branch office tel: +852-3107-7303 tel: +886-2-8712-0478 tel: +82-2-528-0301 fax: +852-3107-7309 fax: +886-2-2545-3859 fax: +82-2-528-0302 nec electron devices european operations http://www.nec.de/ tel: +49-211-6503-101 fax: +49-211-6503-487 california eastern laboratories, inc. http://www.cel.com/ tel: +1-408-988-3500 fax: +1-408-988-0279 0110 nec compound semiconductor devices, ltd. 5th sales group, sales division tel: +81-3-3798-6372 fax: +81-3-3798-6783 e-mail: salesinfo@csd-nec.com business issue nec compound semiconductor devices, ltd. http://www.csd-nec.com/ sales engineering group, sales division e-mail: techinfo@csd-nec.com fax: +81-44-435-1918 technical issue PS710CL2-1A safety information on this product caution gaas products the product contains gallium arsenide, gaas. gaas vapor and powder are hazardous to human health if inhaled or ingested. ? do not destroy or burn the product. ? do not cut or cleave off any part of the product. ? do not crush or chemically dissolve the product. ? do not put the product in the mouth. follow related laws and ordinances for disposal. the product should be excluded from general industrial waste or household garbage.

▲Up To Search▲

Price & Availability of PS710CL2-1A

	To Download PS710CL2-1A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .