28 pin pic panic module farnell order code 112-203 bluebird electronics suite 2, townsend barn po u l s hot, d e v i ze s . sn 1 0 1 s d tel +44 (0) 1380 827080 fax +44 (0) 1380 827082 internet www.bluebird-electronics.co.uk email info@bluebird-electronics.co.uk have you ever been in a panic to produce something in a hurry? have you prototyped a pic project and wanted to box it up to give a professional looking unit? look no further. two ready assembled modules have been developed to enable prototyping with either 18 or 28 pin 16cxx pic?s and then simply replace the cover and mount accordingly. the modules comprise a socket for the pic with all the i/o brought out, a small proto-block, a 78l05 regulator and a 4mhz resonator (socketed). with the addition of a comms module, remote data transfer is possible on either rs232 (2xtx, 2xrx pins) or rs485 (with terminating resistor). the modules plug directly into the proto-board and are fitted with screw connectors for external cable connections. use with a picstart plus programmer and the pic of your choice. specification supply voltage 7 to 25 volts internal voltage 5 volts supply current 100ma (max) resonator 4mhz (supplied) program pic as xt for 4mhz - hs for higher frequencies notes this module is not suitable for the pic16c5xx series, which have a different pinout. as the construction and software is out of our control, it is up to the user to ensure the product meets emc regulations order as panic18 113-578 PANIC28 112-203 comm232 118-072 comm485 118-084
|
