? semiconductor components industries, llc, 2005 june, 2005 ? rev. 6 1 publication order number: msb709?rt1/d msb709?rt1 preferred device pnp general purpose amplifier transistor surface mount features ? pb?free package is available maximum ratings (t a = 25 c) rating symbol value unit collector ? base voltage v (br)cbo ?60 vdc collector ? emitter voltage v (br)ceo ?45 vdc emitter ? base voltage v (br)ebo ?7.0 vdc collector current ? continuous i c ?100 madc collector current ? peak i c(p) ?200 madc thermal characteristics characteristic symbol max unit power dissipation p d 200 mw junction temperature t j 150 c storage temperature t stg ?55 ~ +150 c maximum ratings are those values beyond which device damage can occur. maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. if these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. http://onsemi.com preferred devices are recommended choices for future use and best overall value. marking diagram collector 3 2 base 1 emitter sc?59 case 318d 2 1 3 ar m ar = specific device code m = date code = pb?free package (note: microdot may be in either location ) see detailed ordering and shipping information in the package dimensions section on page 2 of this data sheet. ordering information
msb709?rt1 http://onsemi.com 2 electrical characteristics (t a = 25 c) characteristic symbol min max unit collector ? emitter breakdown voltage (i c = 2.0 madc, i b = 0) v (br)ceo ?45 ? vdc collector ? base breakdown voltage (i c = 10 adc, i e = 0) v (br)cbo ?60 ? vdc emitter ? base breakdown voltage (i e = 10 adc, i e = 0) v (br)ebo ?7.0 ? vdc collector ? base cutoff current (v cb = 45 vdc, i e = 0) i cbo ? ?0.1 adc collector ? emitter cutoff current (v ce = 10 vdc, i b = 0) i ceo ? ?100 nadc dc current gain (note 1) (v ce = 10 vdc, i c = 2.0 madc) h fe1 210 340 ? collector ? emitter saturation voltage (i c = 100 madc, i b = 10 madc) v ce(sat) ? ?0.5 vdc 1. pulse test: pulse width 300 s, d.c. 2%. ordering information device package shipping ? msb?709rt1 sc?59 3000 units / reel msb?709rt1g sc?59 (pb?free) 3000 units / reel ?for information on tape and reel specifications, including part orientation and tape sizes, please refer to our tape and reel packaging specifications brochure, brd8011/d.
msb709?rt1 http://onsemi.com 3 package dimensions e a1 b a e d 1 3 2 c l notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: millimeter. h e dim a min nom max min millimeters 1.00 1.15 1.30 0.039 inches a1 0.01 0.06 0.10 0.001 b 0.35 0.43 0.50 0.014 c 0.09 0.14 0.18 0.003 d 2.70 2.90 3.10 0.106 e 1.30 1.50 1.70 0.051 e 1.70 1.90 2.10 0.067 l 0.20 0.40 0.60 0.008 2.50 2.80 3.00 0.099 0.045 0.051 0.002 0.004 0.017 0.020 0.005 0.007 0.114 0.122 0.059 0.067 0.075 0.083 0.016 0.024 0.110 0.118 nom max h e sc?59 case 318d?04 issue g 2.4 0.094 0.95 0.037 0.95 0.037 1.0 0.039 0.8 0.031 mm inches scale 10:1 *for additional information on our pb?free strategy and soldering details, please download the on semiconductor soldering and mounting techniques reference manual, solderrm/d. soldering footprint*
msb709?rt1 http://onsemi.com 4 on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800?282?9855 toll free usa/canada japan : on semiconductor, japan customer focus center 2?9?1 kamimeguro, meguro?ku, tokyo, japan 153?0051 phone : 81?3?5773?3850 msb709?rt1/d literature fulfillment : literature distribution center for on semiconductor p.o. box 61312, phoenix, arizona 85082?1312 usa phone : 480?829?7710 or 800?344?3860 toll free usa/canada fax : 480?829?7709 or 800?344?3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : http://onsemi.com order literature : http://www.onsemi.com/litorder for additional information, please contact your local sales representative.
|