original creation date: 01/05/98 last update date: 03/09/99 last major revision date: 01/05/98 mv54act175-x rev 0a0 microcircuit data sheet quad d flip-flop general description the 54act175 is a high-speed quad d flip-flop. the device is useful for general flip-flop requirements where clock and clear inputs are common. the information on the d inputs is stored during the low-to-high clock transition. both true and complemented outputs of each flip-flop are provided. a master reset input resets all flip-flops, independent of the clock or d inputs, when low. ns part numbers 54act175e-qmlv* 54act175j-qmlv** 54ACT175W-QMLV*** industry part number 54act175 prime die j175 controlling document 5962-89693 processing mil-std-883, method 5004 quality conformance inspection mil-std-883, method 5005 subgrp description temp ( c) o 1 static tests at +25 c 2 static tests at +125 c 3 static tests at -55 c 4 dynamic tests at +25 c 5 dynamic tests at +125 c 6 dynamic tests at -55 c 7 functional tests at +25 c 8a functional tests at +125 c 8b functional tests at -55 c 9 switching tests at +25 c 10 switching tests at +125 c 11 switching tests at -55 c 1
microcircuit data sheet mv54act175-x rev 0a0 features - edge-triggered d-type inputs - buffered positive edge-triggered clock - asynchronous common reset - true and complement output - outputs source/sink 24 ma - act175 has ttl-compatible inputs - standard military drawing (smd) - act175: 5962-8969301v2a*, vea**, vfa*** 2
microcircuit data sheet mv54act175-x rev 0a0 (absolute maximum ratings) (note 1) supply voltage (vcc) -0.5v to +7.0v dc input diode current (iik) -20 ma vi = -0.5v +20 ma vi = vcc +0.5v dc input voltage (vi) -0.5v to vcc +0.5v dc output diode current (iok) -20 ma vo = -0.5v +20 ma vo = vcc +0.5v dc output voltage (vo) -0.5v to vcc +0.5v dc output source or sink current (io) +50 ma dc vcc or ground current per output pin (icc or ignd) +50 ma storage temperature (tstg) -65 c to +150 c junction temperature (tj) 175 c cdip thermal resistance, junction-to-case see mil-std-1835 maximum power dissipation (pd) 500 mw lead temperature soldering, 10 seconds +300c note 1: absolute maximum ratings are those values beyond which damage to the device may occur. the databook specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. national does not recommend operation of fact tm circuits outside databook specifications. recommended operating conditions supply voltage (vcc) 4.5v to 5.5v input voltage (vi) 0v to vcc output voltage (vo) 0v to vcc operating temperature (ta) -55 c to +125 c minimum input edge rate (delta v/delta t) act devices vin from 0.8v to 2.0v 125 mv/ns vcc @ 4.5v, 5.5v 3
mv54act175-x rev 0a0 microcircuit data sheet electrical characteristics dc parameters (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp. range: -55c to 125c. symbol parameter conditions notes pin- name min max unit sub- groups iih high level input current vcc=5.5v, vm=5.5v 1, 2 input 0.1 ua 1 1, 2 input 1.0 ua 2, 3 iil low level input current vcc=5.5v, vm=0.0v 1, 2 input -0.1 ua 1 1, 2 input -1.0 ua 2, 3 vol low level output voltage vcc=4.5v, iol=50.0ua, vil=0.8v, vih=2.0v 1, 2 output .10 v 1, 2, 3 vcc=5.5v, iol=50.0ua, vil=0.8v, vih=2.0v 1, 2 output .10 v 1, 2, 3 vcc=4.5v, iol=24.0ma, vil=0.8v, vih=2.0v 1, 2 output .36 v 1 1, 2 output .50 v 2, 3 vcc=5.5v, iol=24.0ma, vil=0.8v, vih=2.0v 1, 2 output .36 v 1 1, 2 output .50 v 2, 3 viol dynamic output current low vcc=5.5v, vil=0.8v, vih=2.0v, iol=50.0ma 1, 2, 5 output 1.65 v 1, 2, 3 voh high level output voltage vcc=4.5v, vil=0.8v, vih=2.0v, ioh=-50.0ua 1, 2 output 4.40 v 1, 2, 3 vcc=5.5v, vil=0.8v, vih=2.0v, ioh=-50.0ua 1, 2 output 5.40 v 1, 2, 3 vcc=4.5v, vil=0.8v, vih=2.0v, ioh=-24.0ma 1, 2 output 3.86 v 1 1, 2 output 3.70 v 2, 3 vcc=5.5v, vil=0.8v, vih=2.0v, ioh=-24.0ma 1, 2 output 4.86 v 1 1, 2 output 4.70 v 2, 3 vioh dynamic output current high vcc=5.5v, vil=0.8v, vih=2.0v, ioh=-50.0ma 1, 2, 5 output 3.85 v 1, 2, 3 icch supply current outputs high vcc=5.5v 1, 2 vcc 100 na 1 1, 2 vcc 160 ua 2, 3 iccl supply current outputs low vcc=5.5v 1, 2 vcc 100 na 1 1, 2 vcc 160 ua 2, 3 iccf supply current functional vcc=5.5v 1, 2 vcc 100 na 1 1, 2 vcc 160 ua 2, 3 icct supply current per input vcc=5.5v, viht=vcc-2.1v 1, 2 vcc 1.0 ma 1 1, 2 vcc 1.6 ma 2, 3 vic- negative input clamp voltage vcc=open, im=-1.0ma 8, 9 input -0.40 -1.50 v 1 4
mv54act175-x rev 0a0 microcircuit data sheet electrical characteristics dc parameters(continued) (the following conditions apply to all the following parameters, unless otherwise specified.) dc: vcc 4.5v to 5.5v, temp. range: -55c to 125c. symbol parameter conditions notes pin- name min max unit sub- groups vic+ positive input clamp voltage vcc=0.0v, im=1.0ma 8, 9 input 0.40 1.5 v 1 5
mv54act175-x rev 0a0 microcircuit data sheet electrical characteristics ac parameters (the following conditions apply to all the following parameters, unless otherwise specified.) ac: cl=50pf, rl=500 ohms, trise/tfall=3.0ns, temp range: -55c to 125c. symbol parameter conditions notes pin- name min max unit sub- groups tplh(1) propagation delay vcc=4.5v 3, 4, 7 cp to qn or qn 1.5 10.0 ns 9 3, 4, 7 cp to qn or qn 1.5 11.5 ns 10, 11 tphl(1) propagation delay vcc=4.5v 3, 4, 7 cp to qn or qn 1.5 10.0 ns 9 3, 4, 7 cp to qn or qn 1.5 12.5 ns 10, 11 tplh(2) propagation delay vcc=4.5v 3, 4, 7 mr to qn or qn 1.5 9.5 ns 9 3, 4, 7 mr to qn or qn 1.5 11.5 ns 10, 11 tphl(2) propagation delay vcc=4.5v 3, 4, 7 mr to qn or qn 1.5 9.5 ns 9 3, 4, 7 mr to qn or qn 1.5 11.0 ns 10, 11 ts(h/l) setup time high or low vcc=4.5v 6 dn to cp 3.0 ns 9 6 dn to cp 3.5 ns 10, 11 th(h/l) setup time high or low vcc=4.5v 6 dn to cp 1.5 ns 9, 10, 11 tw(h/l)(1) pulse width high or low vcc=4.5v 6 cp 5.0 ns 9, 10, 11 tw(l)(2) mr pulse width low vcc=4.5v 6 mr 5.0 ns 9, 10, 11 trec recovery time vcc=4.5v 6 mr to cp 1.0 ns 9 6 mr to cp 1.5 ns 10, 11 fmax maximum clock frequency vcc=4.5v 6 95 ns 9, 10, 11 note 1: screen tested 100% on each device at +25c & +125c temperature, subgroups 1, 2, 7, & 8. note 2: sample tested (method 5005, table 1) on each mfg. lot at +25c, +125c, & -55c temperature, subgroups a1, 2, 3, 7, & 8. note 3: screen tested 100% on each device at +25c temperature only, subgroup a9. 6
mv54act175-x rev 0a0 microcircuit data sheet (continued) note 4: sample tested (method 5005, table 1) on each mfg. lot at +25c, +125c, & -55c temperature, subgroups a9, 10 & 11. note 5: transmission line driving test, guardband limits set for +25c, 2 msec duration max. note 6: guaranteed but not tested. (design characterization data) note 7: min limits guaranteed for 5.5v by guardbanding 4.5v minimum limits. note 8: screen tested 100% on each device at +25c temperature only, subgroup a1. note 9: sample tested (method 5005, table 1) at +25c temperature only, subgroup a1. 7
|
