phlatlight ? led development kit product brief dk-105t-1 product brief www.luminus.com ? 2009 luminus devices, in c. - all rights reserved pdb-00xxxx rev 01 overview phlatlight dk-105t-1 development kit is a comprehensive solu- tion designed specifically to support development of phlatlight sst-90 and sst-50 based solutions. the kit includes highly ver- satile drivers and control circui try, efficient thermal manage- ment solutions, clean interfaces, and cabling for use with standard laboratory equipment. the inclusion of these compo- nents ensures the phlatlight sst-90 and sst-50 led modules can be operated optimally at any dr ive condition. whether this is low power for maximum efficien cy, high power for maximum brightness or anywhere in between, the phlatlight dk-105t de- velopment kit ensures th e right performance. this plug and play solution can easily be connected to standard laboratory equipment through standard connectors and allows system designers to save weeks in their development cycles. key features ? compatibile with sst-90 and sst-50 phlatlight leds ? driver board supply currents of 1.75a, 3.2a and 5a ? on board pwm controller supports duty cycles ranging from 0% to 100% ? dimmable using 0-10v analog input ? included par-20 format synjet cooling system ? typical thermal resistance of 1.67oc/w to 2.5oc/w from heat sink to ambient ? driver circuitry based off of ti tps71530 ic
phlatlight development kit www.luminus.com ? 2009 luminus devices, inc. - all rights reserved page 2 phlatlight evaluation kit contents ? 1 comprehensive driver board capable of providing 1.75a, 3.15a or 5a to the led ? 1 high performance, synjet thermal solution ? simple interfaces to user supplied equipment ? thermal interface materials and mounting hardware ? user manual including step-by-st ep instructions for set-up and operation of the kit. user equipment required ? standard 12v/50w power supply. ? standard laboratory instrument ation - volt meter, oscillo- scope, photodetector. ? 0-10v dimmer or power supply for dimming note: phlatlight led products are not included in the develop- ment kits and must be purchased separately. product compatibility ordering information the products, their specifications and other information appearing in this document ar e subject to change by luminus devices wi thout notice. luminus devices assumes no liability for errors that may appear in this document, and no liability othe rwise arising from the applicati on or use of the product or information contained herein. none of the information provided herein sh ould be considered to be a representation of the fit ness or suitability of the product for any particular application or as any other form of warranty. luminus devices? product warranties are limited to only such warranties as accompany a purchase contract or purchase order for such products. nothing herein is to be construed as constituting an additio nal warranty. no infor- mation contained in this publication may be considered as a waiv er by luminus devices of any intellectual property rights that luminus devices may have in such information. phlatlight ? is a registered trademark of luminus devices, inc., all rights reserved. luminus devices 1100 technology park drive 978-528-8000 (t) billerica, ma 01821 978-528-8001 (f) e-mail: sales@luminus.com www.luminus.com development kit part number compatible phlatlight leds dk-105t-1 sst-90 * , sst-50 * note *: development kit thermal solution is predrilled for ssr-50 and ssr-90. it is recommended to specify ssr-90 or ssr-50 (sst-90 or sst-50 premounted on star format mcpcb) for evaluation. ordering part number product description dk-105t-1 dk-105t phlatlight development kit single channel development kit, with 5a driver, par-20 synjet and user manual
|
